Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the 72 inch long by two inch wide aluminum piano hinge. Now this hinge will provide sturdy, continuous support along the length of your cabinet, your door, or your panel. This is great for oversize doors, trailer doors, and entrance doors. And this hinge will provide more support than your multiple small hinges. It has a nice continuous design, so to help reduce stress on the hinge when it hinged with heavier doors.
And this does rotate 270 degrees. You can see if I bend it back about 90 degrees that way, and then you can rotate it another 180 degrees. So basically, a total of 270 degree rotation, gives you a nice full opening and closing motion. Now, this one happens to be an aluminum construction, has a nice middle finish to it, to resist corrosion, very lightweight. Now this is a weld on or bolt on installation.
To bolt it on, you would have to drill holes into the hinge. And this part is made in the USA. A few dimensions on this, we'll start with the overall length. If I take our tape measure, we go from one end all the way to the other end. It's about at 72 inches.
So tall as six feet in length. The width of it and we're gonna zoom in on that. And the width would be at the widest points. So when it's folded into the widest, it's gonna be this way. So you can see the width is gonna be right at two inches wide.
That's the open width. And then the knuckle length, each one of these little sections on the hinge is a knuckle. So the length on the knuckles are gonna be right at a half an inch. And the pin diameter that's in this piano hinge is gonna be 1/8 of an inch. And again, you can see as you rotate this hinge, just like that. But that should do it for the review on the 72 inch long by two inch wide aluminum piano hinge..
Average Customer Rating: 4.8 out of 5 stars (454 Customer Reviews)
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Do you have a question about this Trailer Door Hinge?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.