Toyota Sienna Roof Rack

Select Vehicle Year

  
Roof Rack

Available Years for Toyota Sienna Roof Rack


Roof Racks

Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima, Rhino Rack, Rola and Malone roof racks are built to the highest quality specifications to accommodate all your cargo needs.

Thule, Yakima and Rhino Rack offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.

Cargo baskets from Rola, Rhino Rack, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.

If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.




Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima, Rhino Rack, Rola, Inno and Whispbar that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers



Search For Custom Fit Toyota Sienna Accessories
Select A Category Below



Toyota Sienna Roof Rack Videos

Thule Roof Rack Review - 2017 Toyota Sienna

Speaker 1: Today for your 2017 Toyota Sienna, we're gonna be test-fitting the Thule aeroblade roof rack system, consisting of part numbers THARB53. These are the Thule aeroblade load bars, 53 inches long. These also come in black, as part number THARB53B. We'll also be using part number TH450R, and these are the Thule rapid crossroad roof mounted railing foot packs.Thule aeroblade roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. This can carry anything from cargo baskets to cargo boxes to ski and snowboard carriers as well. The bars themselves have a general aerodynamic shape to them and that coupled with the rubber strip at the top is going to cut down the wind noise and drag while you drive.Also, we can slide open the end cap here and you can see that they can be used with T-track accessories.



Thule AeroBlade Edge Roof Rack Installation - 2017 Toyota Sienna

Speaker 1: Today on our 2017 Toyota Sienna, we're gonna be test fitting the Thule AeroBlade Edge Roof Rack System for factory raised side rails, part number TH7502-TH7502. This also comes in black as part number TH7502B-TH7502B. The Thule AeroBlade Edge Roof Rack System is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. This can carry anything from cargo baskets, to cargo boxes, to kayak carriers, to ski and snowboard carriers as well.The bar has an aerodynamic shape to it, and that, couple with the rubber strip up at the top, is gonna cut down wind noise and drag. Now, because of it's style and how it attaches to the factory raised side rails, it does have a factory look to it once you install it. However, because you don't have that additional overhang with the crossbars, and because these go in so far with the foot packs, you are gonna lose some space when you install stuff on your roof.Removing the end caps, you can also see that these can be used with T-track accessories.



Thule Roof Rack Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna we're going to be taking a look at the Thule Roof Rack System consisting of part numbers THARB53, those are the AeroBlade Load Bars, 53 inches long. These also come in black, and also part number TH450R, and those are the Rapid Crossroad Roof Mounted Foot Packs that actually wrap around your factory raised side rails. It's a very easy system to install, simply wraps around your factory raised side rails as I stated before. The bar itself has a nice aerodynamic shape to it which is going to cut down wind noise and drag, and combined with the other bar has a carrying capacity of 165 pounds, although you want to double check with your vehicle's manual to make sure your vehicle can withstand that weight. Let's go ahead and show you how the rear one goes on. We already have it partially assembled on our table here. We already have the end cap taken off, and that's in order to slide the foot pack into place.



Inno Roof Rack Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna we're going to be test fitting the Inno Roof Rack System consisting of part numbers INB117, and these are the Inno Square Crossbars in steel, 46 inches long and part number INFR. These are the Inno Feet for the square crossbars, particularly for the raised side rails that you can see here. We have the front one installed, and these are nice and sturdy bars. Along with the rear one they have a carrying capacity of 220 pounds, although you want to double check with your vehicle's manufacturing instructions to make sure that it can withstand that weight on the roof. It's very simple to install. It simply just wraps around your factory raised side rails as you can see here. It even has this lock on the end for additional security so your bars can't be removed.



Inno Roof Rack Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna, we're going to be test fitting the Inno roof rack system. Consisting of part numbers INXB 100-2. These are the Aero crossbars, 39" long. The part number INXS 100. These are the flush feet for the Aero crossbars, particularly for the raised side rails as you see here. We already have the front bar installed, as you can see it has a nice factory look to it. The bars themselves, have a aerodynamic shape to it.



Inno Roof Rack Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the Inno Aero Roofing Rack System. The crossbars part number is INXB130-2 and the Through Feet are INXS150. I have the front part already on, I'm going to install the second part. Nice and pretty much easy to install. Just going to show you all the parts here. Like I said, we have our crossbar, we have our through feet, we have our locking covers, and we have our end caps.



Thule Roof Rack Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to look at the Tuley Aeroblade Crossrow roof erect system. The Aeroblades are THARB53 and the foot pack is TH450R. I have the first one already on. I'm going to install the second one. It should be very easy. All right, like I said, we have the first one already on. Here's our crossbar.



Rhino Rack Roof Rack Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're doing a test fit of the Rhino-Rack Vortex Arrow Crossbars. The part number for our crossbars is RRVA126B-2. For the foot pack we're using with our raised rail system, is RRSX005. As you can see, we already have our front bar on. We 're going to show you first how we put the back bar together with our last foot pack. Then we'll show you how we put that on to the vehicle. I've got this one foot pack on.



Thule Crossroad Roof Rack Installation - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Crossroads Roof Rack System using the 58" square bars. We'll use part numbers THLB58 and TH450. With our rack assembled according to the manufacturer's instructions, we'll grab the front half of our rack and place it onto the front portion of our side rails. We'll bring the black rubber coated metal straps around the underside of our side rails and fit them into the foot of the carrier. We'll need to find a fixed point for measurements. In this case we're going to use the intersection here at the very front of the side rail. We're going to measure back 5" from that intersection to the front edge of our foot pack.



Thule Crossroad Roof Rack Installation - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna, we'll be test fitting the Thule complete crossroad kit with 58 inch long bars and locks, part number TH45058. We'll begin our test fit by placing the front load bar onto the front of our roof. We'll position both of the feet next to a crease, right where the raised side rail connects to the roof. Make sure the feet are equidistant from the slide on both sides. This will ensure that the front bar is perpendicular to the raised rails of our roof. With the bar in position, we can bring the rubber coated steel straps around the underside of the bar and hook them into the connection points. We'll then use the included tool to tighten on the black bolt that tighten the straps up against the rail. We'll then repeat the same process for the other side. With this done, we'll go ahead and place the rear load bar onto the rear of our roof and measure the load bar spread.



Thule AeroBlade Traverse Roof Rack Installation - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna, we'll be test fitting the Thule AeroBlade roof rack system using part numbers THARB53 for the 53" AeroBlade bars, and part number TH450R for the Thule Rapid Crossroad roof-mounted railing foot packs. With our roof rack assembled according to the instructions, we'll begin the test fit by placing our front load bar onto the front part of our roof. We'll find a fixed point on the side rails to set our foot pack. This way we can make sure that our foot packs are in line with each other on each side of the vehicle. Once we have the bar in place, we need to check for even bar overhang on each side of our vehicle. Once we have it set, we can bring our strap around our side rail, place it back into the foot pack, and tighten with the included tool.





Thule Crossroad Roof Rack Installation - 2005 Toyota Sienna

Today on this 2005 Toyota Sienna with factory raised side rails; we are going to be installing a Thule Crossroad Roof Rack System. We already have our crossbar assemblies put together so now we are ready to begin mounting them on the top of our vehicle. With this roof rack system we can have a maximum crossbar spread of 59 inches. We do not need to use a specific crossbar spread, as this system is designed to work on top of factory raised side rails, however you may want to check with the instructions on whatever accessories you might be using to see if they have a recommended crossbar spread. First we are going to set the front crossbar assembly on top of our side rails. We are going to measure from the end of the crossbar foot to the seam of our factory raised side rails.



Thule Crossroad Roof Rack Installation - 2011 Toyota Sienna

Today on this 2011 Toyota Sienna we are going to show you a Thule Crossroad roof rack system. The Thule Crossroad system is designed to attach to vehicles with factory raised side rails. It utilizes a steel band that is coated in rubber that wraps around the side rails. Once you have the roof rack system assembled, lay the first crossbar over the side rails. Once we have our crossbar in position, we will make sure that the bar is overhanging on either side evenly. Once we have made sure that the overhang is even on both sides, we can go ahead and begin tightening down our crossbar system. Take the steel band, pull it underneath the side rail and push it in to the crossroad foot. Take the cap with the built in Allen key and begin to tighten the clamp. We will move back and forth from driver side to passenger side to make sure we tighten down the system evenly. As we tighten the Allen head bolt, not only does it pull the steel band tight around the side rails but it also locks the Crossroad feet on to the crossbars. 1:02





Toyota Sienna Roof Bike Racks Videos

Kuat Roof Basket Review - 2018 Toyota Sienna

Speaker 1: Today on our 2018 Toyota Sienna we're going to be test fitting the Kuat Vagabond X Rooftop Cargo Basket, part number VX201. This is also a two bike carrier and it measures 52" long by 41" wide, so there's plenty of space to work with to store your sporting goods equipment, your luggage, your camping gear, whatever you want to take out from the inside of your Siennas to make a little bit more space. It also has an extension that is sold separately, so you have even more space to work with. You can find that on etrailer.com. And it's a very easy process to install it. It simply clamps around your existing factory roof rack, like you see here, but if you have a Sienna that has an after market roof rack, it will work with aero, elliptical, square, and round bars as well.And it also locks into place so it's going to be secure.



RockyMounts Roof Bike Racks Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna we're doing a test fit of the RockyMounts SwitchHitter roof-mounted bike rack. That part number is RKY1270. Now we already have our bike secured down. We're first going to show you how we secure it in place. Here at the back we have a strap here. It's going to be a cam buckle strap that's going to hold our back tire in place.



RockyMounts Roof Bike Racks Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna we're doing a test fit of the RockyMounts BrassKnuckles roof-mounted bike rack. That part number is RKY1202. Now we already have our bike secured down. We're first going to show you how we secure it. Starting here in the back, we have a cam buckle start. You can see it's a little off-center from where it usually is here in the center.



Thule Roof Bike Racks Review - 2016 Toyota Sienna

Today, on our 2016 Toyota Sienna, we're going to be test fitting the Thule Circuit XT Rooftop Bike Rack, part number TH526XT. We already have a bike installed on the rack. Let's go ahead and take a closer look, and show off some of the features. The first feature we'd like to show off is the fact that how this attaches to the bike rack, there's going to be no frame contact whatsoever. Instead, it's going to grip up by the fork mounts up at the front here with this possibly lockable skewer, which you can knock out this plastic piece and replace it with a Thule Core Lock to secure your bike to your rack. The lock cores are sold separately.



RockyMounts Roof Bike Racks Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna, we're going to be test fitting the RockyMounts JetLine Roof Bike Rack, part number RKY1320. We already have a bike installed on the rack, let's go ahead and take a closer look and show off some of the features. First off, how this grips to the bike rack, there's going to be no frame contact at all. Instead, it's going to grip it by the front forks with this skewer. You can actually knock this portion out here and install a lock, so you can actually secure it to the bike rack. It also has this wheel strap at the rear, which is adjustable along the length of the bike rack to accommodate different sized bikes.



Rhino Rack Road-Warrior Roof Bike Racks Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna, we're going to be test fitting the Rhino-Rack Road Warrior rooftop bike rack, part number RBC036. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. First off, how the bike actually attaches to the rack. There's going to be no frame contact at all. Instead, we're going to be gripping it by the fork mount up here at the front and by this lockable skewer as well. Once you attach this and lock it into place, your bike is secured to the rack.



Rhino Rack MountainTrail Roof Bike Racks Review - 2016 Toyota Sienna

Today on our 2016 Toyota Sienna, we're going to be test fitting the Rhino-Rack Mountain Trail roof top bike rack. Part number RBC035. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. First off, how the bike is actually gripped by the rack. There's going to be no frame contact at all. Instead, it grips it by your fork mounts at the front here with this front skewer.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to look at the Inno Tire Hold Roof Bike Rack, wheel mounted. The part number is INA389. Now, we have a bike on our rack and the rack hooked to our vehicle. Let's go ahead and look at this. How this is all set up . we have our wheel cradles, we have our tire hold downs. We have one in the front and one in the back.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the Inno Fork Lock Roof Mounted Bike Carrier. Part# is INXA391. We have a bike on our rack, and we have our rack hooked to our vehicle. I'm just going to show you a few features of it. This is a fork-mounted bike rack. We see we have the skewer here. We actually have a key for your anti-theft.



Rhino Rack Road-Warrior Roof Bike Racks Review - 2015 Toyota Sienna

Today, on our 2015 Toyota Sienna, we are doing a test fit of the Rhino-Rack Road Warrior roof mounted bike rack, part number RBC036. We already have our bike on the rack, we first going to show you how we take that down, and strap it on there to secure it. Back here in the back, we've got a regular wheel strap that you would see on just about any of your roof mounted bike racks. To release that, we're just going to push in a black lever and lift up. We want to make sure that's between the spokes whenever we loaded up. Now, because of how tall the vehicle is I am going to step in here, to be able to take it down.



Thule Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to take a look at the Thule Thru Ride Roof Bike Rack. Part number on that is TH535. I have a bike on our rack, and we have our rack hooked up to our vehicle. I'm just going to show you a few features of it. First thing I'd like to show you, this is a fork mounted bike rack. We have our skewer here. It's actually engaged right now.



Thule Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the Tully Sprint T-Track Roof Bike Rack, fork mounted. That part number's TH569. Now I have the bike on our rack and we have the rack hooked up to our vehicle. I'm just going to show you a few features of it. Like I said, this is a fork mounted bike rack. We're going to have our fork skewer here.



Thule Sprint Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to be doing the test fit of the Thule Sprint Rooftop Mounted Bike Carrier. It's going to be fork mounted and attached to our factory raised roof rails and factory crossbar. First thing you're going to want to do is make sure that you have the strap undone from the little T slot, that way it can easily receive your bar. Next, place it up on top the vehicle and line up that front pad with your front crossbar, then you can simply slide the back one down and into place where you need it. Go ahead and set it down and adjust it as needed. Let's attach the front one first.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to be doing a test fit of the Inno Multi Fork Lock bike rack. This is going to be for your roof rack system to mount a single bike with forks. Part number INA392. Up here you can see that we do have our factory raised roof rails, as well as our factory cross bars. We're going to show you how this mounts to that. First step you're going to do is make sure that you have the top unlocked and the strap dropped down and out. Now if you open up this, you'll be able to open up that bottom door too, and have access to where the strap goes.



Inno Roof Bike Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Inno Fork Lock III which is going to be your rooftop mounted bike carrier for 1 single bike to be fork-mounted. It's going to be part number INA391 and it's going to come in that nice silver aluminum finish. We're going to show you how it mounts up here on top of our raised factory roof rails with the factory crossbars. First step we're going to need to do is go ahead and unlock and pull off the top cover. That'll give us access to this little lever here which will allow the bottom clamp to come around and undo so we can get around that front crossbar. On the backside here, this one simply just slides on. If you can see the groove there it'll slide on to that bolt and allow us to clamp it on that way.



Yakima FrontLoader Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna were going to be test fitting the Yakima FrontLoader. This is a wheel mount roof bike rack, part number Y02103. With our Yakima RailGrab Roof Rack System already installed on the Sienna, well begin our test fit by placing our bike rack directly onto our crossbar. Here at the front, well want the two outer legs of our clamp to be in front of our crossbar, while the single middle one will be behind it. Well then tighten the black T-handle located at the front of the rack, and that will secure our front clamp. With the front secure we can move to the rear. Here were going to loosen the black T-handle, remove the T-bolt from the lower portion of the clamp, bring that portion around the underside of our crossbar, reinsert our T-bolt, and tighten that black T-handle back down. Its now time to load up our bike. Well begin by undoing our rear wheel strap and making sure that the larger portion of our front wheel clamp is fully extended.



Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we are going to be test-fitting the Yakima Forklift, a fork-mount roof bike rack, part number Y02098. With our Yakima Rail Grab roof rack system already installed on the Sienna, we will begin our test-fit by placing our bike rack directly onto our crossbars. Here at the front, we are going to remove the skewer, which is reverse-thread. Slide back the black, plastic cover and loosen the black T handle. This will allow us to remove the T bolt from the lower portion of our clamp. We will then bring that portion around the underside of our load bar. Re-insert our T bolt and tighten down that black T handle to secure it.



Thule Big Mouth Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna were going to be test fitting the Thule Big Mouth. This is a frame clamp style roof bike rack, part number TH599XTR. Weve got our Thule Crossroads roof rack system already installed on our Sienna, so we begin our test fit by placing our bike rack up onto our load bars. These are the clamps. This metal bracket portions going to come around the underside of our load bar, so well need to separate the T bolts from those clamps to allow it to do that. With our T bolts separated well now move our rack backwards, allowing those clamps to come around the underside of our bars.



Thule Sprint Fork Mount Bike Rack Review - 2014 Toyota Sienna

Speaker: Today, on our 2014 Toyota Sienna, were going to be test-fitting the Thule Sprint. This is a fork mount roof bike rack, part number TH528. Well begin our test fit by placing our bike rack up under a load bar. Here at the front, we want to bring the black rubber coated metal strap around the underside. Well then fit it right here into the head of the carrier. On the back side, well turn this black lever.



Swagman Fork Down Roof Bike Rack Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test fitting the Swagman Fork Down. This is a fork mount roof bike rack, part number S64710. We've got the Thule Rapid Crossroads roof rack system that we've already installed on this Sienna, so we'll begin our test fit by placing our bike rack directly up on to our load bars. At the front, we're going to bring a U-bolt around the underside of our load bar and thread two wing nuts on to it. We've got a second U-bolt that we're going to fit on the front here. This one as well, we'll get two wing nuts threaded on to it. We'll then tighten down all four of the wing nuts to secure the front clamp of our rack here. All right. With that nice and secure, we can move to the rear.





Toyota Sienna Roof Cargo Carrier Videos

Thule Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna. We are going to take a look at the Thule canyon roof cargo basket. That part number is TH859. I have it already on the vehicle and we have three of the four hold downs on. The dimensions on here are 49 by 40 by 6. It can hold up to 150 pounds. We always say, please check your manual, owners manual, to see how much weight your roof can actually hold. Like I said, we have the metal plates here and I have three of the four down.



Yakima RocketBox Pro Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Yakima Rocket Box Pro 11. This is going to offer eleven cubic feet of cargo space which is going to be perfect for your skis or snowboards. It's going to come in that nice black finish and be part number Y07193. If you look up on top of our Sienna, you'll notice that it does have the factory raised roof rails as well as the factory crossbars and we're going to show you how it fits and looks on that. First thing you want to do is on the back side, make sure that you have the feet open in the receiving position. Our crossbar will actually slide into position locking it all in place.



Yakima RocketBox Pro Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Yakima RocketBox Pro 14. This is going to have 14 cubic feet of cargo space and come in that nice black finish. It's going to be part number Y07192. As you can see, up on top of our vehicle we already have our factory raised roof rails as well as our factory crossbars in place. We're going to show you how it fits and looks in this application. First thing you'll need to do is make sure that you have the feet loose as far as black turn dial on the inside, which I'll show you in a minute. That way you can adjust your feet up and down and move them into position as necessary.



Thule Hyper XL Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to be doing a test fit of the Thule Hyper XL. It's going to come in that nice two-tone black and silver finish and offer a 17 cubic feet of cargo space. It's going to be part number TH612, but we're going to show you how it looks and fits up on top of our factory raised-roof rails, with the factory crossbars. First thing you're going to want to do is lift your box up on top of the vehicle to kind of gauge where you want to put it. Now if you look on here, the feet are going to be towards the back, but they are adjustable from side to side. You want to make sure that they're open and ready to receive your crossbars. We'll put the front ones all the way back, that way we can make sure that we have enough clearance on the back side of our vehicle.



Inno Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Inno Shadow Series Cargo Box. This is going to offer thirteen cubic feet of cargo space, and come in that nice gloss black finish. It's going to be part number INBRA1250BK, again that's INBRA1250BK. I'm going to show you how it's mounted up here on top of our factory crossbars and raised roof rails. First thing you're going to want to do is lift it up into place. Once you have it lifted up on top the vehicle you'll see these nice rubber protector rails that are going to protect that debris and stuff coming through. These are where the feet will come through at.



Inno Roof Cargo Carrier Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna we're going to be doing a test fit of the Inno Shadow Series 11 cubic feet Cargo Box. This is going to have that nice carbon fiber finish, part number INBRA1170CA. Again that's part number INBRA1170CA. Let's go ahead and get it test fitted up here on top of our raised factory roof rails with our factory crossbars. The first thing you want to do is lift it up on top of the vehicle. If you look on the bottom here you'll see that there's going to be a nice rubber slots and grooves for your feet to come through and go around your crossbars. We're going to line it up to where those are going to be toward the back of those rails.



Thule Pulse Roof Cargo Carrier Review - 2011 Toyota Sienna

Today on our 2011 Toyota Sienna, we're going to be test fitting our Thule Pulse Large Rooftop Cargo Box, part number TH614. To begin our test fit, we're going to put the box on top of the vehicle. If you're short like me, you'll probably want a ladder nearby. That way you can set everything up. We'll go ahead and unlock our box. Work it over. There are four tracks on the inside of the box here you can put the latching knobs through. You want your box positioned toward the front of the vehicle and to the passenger side.



Thule Sonic XXL Roof Cargo Carrier Review - 2011 Toyota Sienna

Today on our 2011 Toyota Sienna we're going to be test fitting our Thule Sonic XXL rooftop cargo box, part number TH636S. This box offers 22 cubic feet of space and it comes in both and silver. Today we're featuring silver. First what I'll do is grab an extra set of hands and we'll go ahead and load the box onto the crossbars. The Sienna has a factory roof rack on it. We'll first set it up here and then we'll move our feet into place.



Thule Sonic XXL Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Sonic XXL Rooftop Cargo Box. With 22 cubic feet of storage space in metallic silver, its part number's TH636S. With our Thule Rapid Crossroads Roof Rack System already installed on the Sienna, we'll begin our test fit by placing our cargo box directly onto our load bars. We found this is the best time to get our feet lined up so they'll go around our bars. With all four of our feet around our bars, we'll now take a quick look to be sure we have our box centered. We'll now open the passenger side of the box, reach in and tighten the two knobs located closest to us.



Yakima LoadWarrior Roof Cargo Basket Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test fitting the Yakima Load Warrior, a roof rack cargo basket with part number Y07070. With our Yakima Rail Grab roof rack system already installed on the Sienna, we'll begin our test fit by placing our cargo basket directly onto our cross bars. We'll then go around to each of the four clamps and remove the T bolt from the lower portion of the clamp, then place the upper portion of the clamps directly on top of our cross bars, bring the lower portion around the bottom, reinsert the T bolt. We can then tighten down both wing nuts to secure our clamp. We'll then move to the three remaining clamps and repeat that same tightening process. With all four of our clamps nice and secure, we're ready to load this basket up with some gear and we can hit the road. That will complete today's test fit of the Yakima Load Warrior, part number Y07070 on our 2014 Toyota Sienna.



Thule Sonic Medium Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Sonic Medium Rooftop Cargo Box. With 13 cubic feet of storage space in glossy black, it's part number TH634B. With our Thule Rapid Crossroads Roof Rack System already installed on our Sienna, we're going to begin our test fit by placing our cargo box directly onto our load bars. We found this is the best time to adjust our feet so they'll around our bars. With all four feet around our bars, we'll take a quick look to be sure we have our box centered, and we'll push it into its forward position. We'll then open the passenger side, reach in and tighten the two black rubber coated knobs located closest to us.



Thule Pulse Large Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, were going to be test fitting the Thule Pulse Large Rooftop Cargo Box, with 16 cubic feet of storage space in matte black, its part number TH615. With our Thule Rapid Crossroads Roof Rack System already install on the Sienna, well begin our test fit by placing our cargo box directly onto our load bars. The Pulse XL is designed to open from the passenger side, so well favor it towards this side as we install it. With our box positioned where we want it, well now open the passenger side. Reach in, and were going to find four foot pegs. Well place one of these foot pegs through each of the four slots located in the bottom of the box, being sure that they go around our load bars. Well then push our box as far forward as possible and tighten down all four of our foot pegs. With all four of them secure, were ready to load our cargo box down with some gear, and we can get on the road. As you can see, when opening our rear hatch, we have no interference issues. That will complete todays test fit of the Thule Pulse Large, part number TH615, on our 2014 Toyota Sienna. .



Thule Pulse Alpine Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test-fitting the Thule Pulse Alpine Rooftop Cargo Box with 11 cubic feet of storage space in matte black. It's part number TH613. With our Thule Rapid Crossroad Roof Rack System already installed on the Sienna, we'll begin our test-fit by placing the cargo box directly onto our load box. This box is designed to open from the passenger side, so we want to favor this side as we install it. Now take a quick look to be sure we have our box straight. We'll then open the passenger side, reach in, and we're going to find four foot packs. We'll place one of these foot packs through each of the four slots in the bottom of the box, being sure as we do they go around our load bars.



Thule MOAB Roof Top Cargo Basket Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Moab Rooftop Cargo Carrier, the mother of all baskets. Part number TH690XT. With our Thule Rapid Crossroads Roof Rack System already installed on the Sienna, we're going to begin our test fit by removing one of the wing nuts and bolts from the same side of all four of our clamps. We'll then place our cargo carrier directly onto our load bars. We'll want the upper portions of our clamp to be sitting on top of those load bars. We'll then bring the lower portion of the clamp around the underside of our load bar, reinsert the bolt, and thread on the wing nut.



Thule Force XXL Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Force XXL Rooftop Cargo Box. With 21 cubic feet of storage space in AeroSkin black, it's part number TH626. With our Thule Rapid Crossroads Roof Rack System already installed on the Sienna, we'll begin our test fit by placing our cargo box directly onto our load bars. We found this is the best time to adjust our feet so they'll go around our bars. With all four feet around our bars, we'll now take a look to be sure we have our box centered. We can then open the passenger side, reach in and tighten the two gray knobs located closest to us. A great feature of the Force XXl is its ability to open from both the passenger and the driver side.



Thule Force Medium Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna we're going to be test fitting the Thule Force Medium Rooftop Cargo Box. With 13 cubic feet of storage space in AeroSkin black, its part number is TH624. With our Thule Rapid Crossroads Roof Rack System already installed on the Sienna, we'll begin our test fit by placing our cargo box directly onto our load bars. We found this is the best time to adjust our feet so they'll go around our bars. With all four feet going around our bars we'll take a quick look to be sure we have our box centered, push it into its forward position. We'll then open the passenger side of the box, reach in and tighten the two gray knobs located on this side. A great feature of the Force is its ability to open from both the passenger and the driver side.



Rhino-Rack Master-Fit Rooftop Cargo Box Review - 2014 Toyota Sienna

Today on our 2014 Toyota Sienna, we're going to be test-fitting the Rhino Rack Master Fit Rooftop Cargo Box with 14 cubic feet of storage space in silver. It's part number is RMF400. With our Thule Rack and CrossRoad Roof Rack system already installed on the scene, we'll begin our test-fit by placing our cargo box directly onto our load box. We'll then take a quick look to be sure we have our box centered. We'll now open the passenger's side, reach in, and we're going to find four foot packs. We'll place two of these through the slots located on the side of the box, being sure that they go around our load bars. A great feature of the Master Fit is its ability to open from both the passenger and the driver side. We'll now make our way around to the driver's side, open the box, reach in, and grab the two foot packs here.



Thule Force XXL Rooftop Cargo Box Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna we'll be test fitting the Thule Force XXL roof top cargo box with 21 cubic feet of space, Aeroskin black in color, part number Th626. With the Thule Rapid Crossroads roof rack system on our vehicle, we'll begin our test fit by placing the cargo box up on the vehicle's load bars. After positioning the box as far forward as possible we can unlock it and open the lid exposing the two closest knobs. We'll turn the knobs to tighten down the clamps and we'll move to the other side of the vehicle and repeat the same process. Now, this double sided opening lid will also enable you to easily load and unload your cargo from either side of the vehicle. Now, as you can see, the rear hatch of our vehicle barley makes contact with the back of the box. That'll complete today's test fit for the Thule Force XXL, part number Th626, on our 2013 Toyota Sienna.



Thule Force Medium Rooftop Cargo Box Review - 2013 Toyota Sienna

Today on a 2013 Toyota Sienna, we'll be test spinning the Thule Force Medium roof top cargo box with 13 cubic ft of space, aero skin black in color, part number TH624. With the Thule rapid crossroads roof rack system on our vehicle, we'll begin our test fit by placing the box pop on to our vehicle's roof. After positioning the clamps over the bars, we can unlock the box and open the lid exposing the two closest knobs. We'll turn the knobs to tighten the clamps up against the load bars. After moving to the other side of the vehicle we can repeat the same process. Once everything is all tightened down and secured, you can see that we can easily access the rear hatch with the box secured.



Rhino-Rack Master-Fit Rooftop Cargo Box Review - 2013 Toyota Sienna

Today, on our 2013 Toyota Sienna, we'll be test fitting the Rhino-Rack Master-Fit Rooftop Cargo Box, with 14 cubic feet of space, silver in color, part number RMF400. With the Thule Rapid CrossRoads Roof Rack System on our vehicle, we'll begin our test fit by placing the box directly up onto the vehicle's roof rack. We'll unlock the box and open the lid, exposing the two slots closest to you. We'll take then 00:22clamps and slide them down through the slots over top of each bar, and then turning the gray knobs to tighten down the clamps. We'll then move to the other side of the vehicle and repeat the same process.Now this double-sided opening lid will also enable you to easily load and unload your cargo from either side of the vehicle. And with everything all tightened down and secured, you can see that we can easily access the rear hatch with the box secured.





Toyota Sienna Ski and Snowboard Racks Videos

Thule Ski and Snowboard Racks Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to do a test fit of the Thule SnowPack Ski & Snowboard Carrier. That part number is TH7326. We have the first one already on. Pretty much easy to install, just rests on any of your crossbars. We're going to go ahead and do the second one now. We're going to pretty much get it even with the first one, be sure we got it strapped down on the other one.





Toyota Sienna Watersport Carriers Videos

Inno Watersport Carriers Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the Inno Boardlocker Board Carrier. That part number is INA744. Now I have one half of it on. I'm going to show you how easy it is to install the other one. All righty. We want to just pretty much try to line it up with the first one.



Thule Watersport Carriers Review - 2015 Toyota Sienna

Today on our 2015 Toyota Sienna, we're going to take a look at the THULE Hull-a-Port Pro Kayak Carrier with tie downs, J style. That part number is TH834. I have the kayak on our vehicle, and I have it already strapped down and everything, so we're just going to show you a few features of it. Like I said, we have our straps for the bow and the stern, the one thing I had to do, I had to go ahead and do this one first, I couldn't find anything under the front metal-wise to hook it up, so I have to use one of the tie downs for THULE. This is sold separately, that part number is TH530. All right, now we're just going to show you how we have it all strapped down. Like I said, I had this strapped down in the front.



Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2014 Toyota Sienna

Today, on our 2014 Toyota Siena, we're going to be test fitting the Thule SUP Taxi, stand up paddle board carrier with a two-board capacity, part number TH810. With our Thule Rapid Crossroads roof rack system already installed on the Siena, we'll begin our test fit by placing the front hamper of our carrier under our front load bar. We'll bring both of the black rubber coated metal straps on the under side of the load bar and clip the one closest to the front of the carrier. We'll then turn the gray knob locate on the front to secure our strap around our bar. Now, make our way around to the driver side to repeat that same tightening process. With the front half of our carrier secure, we'll now grab the rear half, place it under our rear load bar. Again, we're going to bring those straps around the under side of the load bar then we'll fit the one closest to us under the foot of the carrier.



Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2013 Toyota Sienna

Today on our 2013 Toyota Sienna, we'll be test fitting the Thule SUP Taxi standup paddleboard carrier with a 2-board capacity, part number TH810. With the Thule AeroBlade roof rack system assembled onto our vehicle, we'll begin by placing half of our carrier onto our front bar. Once we have it situated the way we like, we can bring the rubber-coated steel straps around the load bar, fitting them back into the foot of the carrier. Then we can use the attached hand knobs to tighten it in place. We'll grab the second half of our carrier and place it onto our rear bar. Then we can repeat the same tightening process that we did at the front.





Toyota Sienna Roof Rack Questions and Answers



Toyota Sienna Roof Bike Racks Questions and Answers



Toyota Sienna Watersport Carriers Questions and Answers