Longest Crossbar Roof Rack Recommendation for 2026 Toyota RAV4 with Flush Rails

Question

Question:

Im looking for an appropriate quality roof rack system for a RAV4 2026, Flush rail vehicle.The rail would need to be an eliptical/aero not square overhang rail of at least 60 inches,and the mounts would need to include a locking mechanism. Can you help me with this? I havent been able to find it using your search tools. Thanks.

asked by: Trace G

0

Expert Reply:

Hey Trace, would a 55 inch crossbar length work? If so, the Yakima HD bar part # Y22BB would be what you will want. A longer bar isn't guaranteed to fit since the mounting channel on the bottom of the bar does not extend the entire length of the crossbar. What are you planning on carrying that you need the extra bar length for?

expert reply by: Jameson C

0

Trace G.

8/20/2026

Hi. Thanks for your reply. I need the full 60 inch length in order to carry two solos canoes side by side. Is there another bar with a mounting channel that would work?

Jameson C.

8/23/2026

@TraceG at this time best option would be the 66 inch round bar roof rack from Yakima that consists of part numbers # Y00410, # Y64AR, # Y27AR, # Y03536.

Trace G.

9/1/2026

@JamesonC Hi. Thanks for your reply. One more question. I’m not going to be racking two canoes all the time so is there a smaller crossbar that I can switch out the 66” round bars with. My preference would be the more aerodynamic elliptical shaped bars. Is that possible, can I comfortably remove the adapter and put on another type bar for every day use. If so what are your recommendations that would work with that tower. Thanks

Jameson C.

9/1/2026

@TraceG You would just need the part # Y00425 for a 50 inch aero crossbar that would mount on the Yakima feet and fit kit that I mentioned already.

See All (19) Replies to Trace G. ∨

Answer 1

Hey James, I checked with our trailer wiring manufacturers just now to verify if they have anything custom fit for your vehicle but at this time they still do not. Only option right now is a universal option like the part #C59236 that you referenced.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Trace, would a 55 inch crossbar length work? If so, the Yakima HD bar part #Y22BB would be what you will want. A longer bar isn't guaranteed to fit since the mounting channel on the bottom of the bar does not extend the entire length of the…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Longest Crossbar Roof Rack Recommendation for 2026 Toyota RAV4 with Flush Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching