Instant Savings on Select Curt Products

Subaru XV Crosstrek Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Subaru XV Crosstrek Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Subaru XV Crosstrek Accessories
Select A Category Below



Subaru XV Crosstrek Custom Fit Vehicle Wiring Videos

Best 2014 Subaru XV Crosstrek Trailer Wiring Options

Today we're going to be taking a look at the best wiring options available for the 2014 Subaru XV Crosstrek. Here we have our Tekonsha T-One Vehicle Wiring Harness. It offers the four-pole flat trailer connector. Its part number is 118467. We also have the CURT. This is also a plug-in style offering the four-pole flat trailer connector.



Best 2015 Subaru XV Crosstrek Trailer Wiring Options

Today we're going to be taking a look at the best wiring options available for the 2017 Subaru XV Crosstrek. Here we have our Tekonsha T-One Vehicle Wiring Harness. It offers the four-pole flat trailer connector. Its part number is 118467. We also have the CURT. This is also a plug-in style offering the four-pole flat trailer connector.



Best 2013 Subaru XV Crosstrek Trailer Wiring Options

Today we're going to be looking at the best wiring options available for the 2013 Subaru XV Crosstrek. Here we have our Tekonsha T-One Vehicle Wiring Harness. It offers the 4-Pole Flat Trailer Connector. Its part number is 118467. We also have the CURT, this is also a plugin style offering the 4-Pole Flat Trailer Connector. Its part number is C56040. Both of our wiring kits are designed to plug directly into a factory plug that we have on the back of our vehicle.



Trailer Wiring Harness Installation - 2015 Subaru XV Crosstrek

Today on our 2015 Subaru XV Cross Track we're going to be taking a look at and installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C56040. It's easy to access, easy to install because you don't have to run any extra wires up to the front of the vehicle, and when you're done using it it tucks away nicely. It's nice that this system has that module on it because what that does is eliminates the need to tap into your vehicles wiring system. It also helps protect your vehicle's electrical. It gives you plenty of room to reach to wherever your trailer's 4-pole connector is. When you pull it out the use it, you want to keep it along the weather stripping here.



Trailer Wiring Harness Installation - 2014 Subaru XV Crosstrek

Today on our 2014 Subaru XV Crosstrek, we're going to be installing the Curt T-connector vehicle wiring harness with 4-pole flat trailer connector, part number C56040. Now before we begin our install, let's show you what it looks like with the wiring installed and how it'll be on your vehicle when in use. Go ahead and lift up our trunk covering here. We'll grab our wiring out of the area near the spare tire with the trunk covering back down. Now that we have our wire pulled out. When we close the rear hatch, it will push in here on the weather stripping and not damage the wire. You want to make sure you stay away from the center latch area as this could pinch or cut the wiring when the rear hatch is closed.



Trailer Wiring Harness Installation - 2013 Subaru XV Crosstrek

All right, today on this 2013 Subaru XV Crosstrek, we're going to install part number C56040 from Curt. Now this part will plug into a port that's inside the vehicle. We need to open the back hatch, and we need to remove the floor covering down to the spare tire. Then we can go ahead and remove the threshold by the tailgate, and then we'll go ahead and loosen up the driver's side interior panel. Now the port is really close to the edge of the panel, but you still need to pull it out some to get access to it. We'll go ahead and cut some of the tape that's holding it to itself, and then we'll go ahead and pull the port out so we can work with it easier.