Kia Sedona Brake Controller

Select Vehicle Year

  
Brake Controller

Available Years for Kia Sedona Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.





Brake Controller Manufacturers


Search For Custom Fit Kia Sedona Accessories
Select A Category Below



Kia Sedona Brake Controller Videos

Trailer Brake Controller Installation - 2006 Kia Sedona

Today, on this 2006 Kia Sedona, we're going to show you the Hopkins InSIGHT trailer brake controller, part number HM47297. This is what the brake controller looks like when it's installed on our Sedona. Now, you'll notice there's not all that much to see. We have our hand control right here with our manual override. Our gain control buttons are right here, more power or less power. There's a sensitivity button on the side here.



Trailer Brake Controller Installation - 2003 Kia Sedona

Today on our 2003 Kia Sedona well be installing the ETBC7 brake controller install kit and our Tekonsha Prodigy P3 brake controller, part number 90195. Well first need to disassemble the interior of the vehicle to gain access to the wiring. Our first step will be removing the rear threshold. To do this well remove the fastener caps. Once we have the fastener caps out of the way we can then go ahead and remove the Phillips screws fastening the rear threshold. Once we have those out of the way well go ahead and set the threshold aside for reinstallation later.