Honda CR-V Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Honda CR-V Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Honda CR-V Accessories
Select A Category Below



Honda CR-V Custom Fit Vehicle Wiring Videos

Curt T-Connector Vehicle Wiring Harness Installation - 2011 Honda CR-V

Hi, I'm Shane with etrailer.com. Today you're going to be taking a look at and I'm going to walk through the installation of the Curt simple plug in vehicle wiring harness for your 2011 Honda CRV. This wiring harness is going to give us our four pole plug, brake lights, turn signals, and running lights. It's going to give us three amps per circuit for our stop and turn signals. Five amps per circuit for the tail lights, it's going to have a nice dust cap. It's going to help protect our wiring from dirt and debris.



Curt T-Connector Vehicle Wiring Harness Installation - 2019 Honda CR-V

Rob: Rob here at etrailer.com. Today, you're going to be taking a look at the Curt T-Connector Vehicle Wiring Harness with a 4 Pole Flat Trailer Connector on our 2019 Honda CRV.Now, our wiring is going to provide us with a four pole flat trailer connector. That way whenever we're pulling a trailer we have all the required lights to get down the road safely like our tail lights, brakes, and turn signals.Now, our wiring does come with a dust cap to keep all that dust, debris, and moisture out of the connector, and prevent any kind of corrosion. However, our wiring is only meant to be on the outside when we're using it. It is going to live on the inside and store there as well.Now, you can see the wire I have dropped out the back of my hatch. Now, if we open it up, and we continue to follow our wire, it'll actually live and store right by our spare tire.



Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Honda CR-V

Today on our 2019 Honda CRV, we're going to be taking a look at and showing you how to install the Tekonsha T1 vehicle wiring harness with a 4-pole flat trailer connector.So here's what our wiring's going to look like once we have it installed, and it's going to provide us with a 4-pole flat trailer connector so we have all the required lights to get down the road safely like our tail lights, brake lights, and our turn signals. Now whenever we're not towing, our wiring is designed to stay on the inside of our CRV. We can simply lift open the hatch and we can store it right down by our spare tire. This will keep it out of the elements and we can make sure that we're not going to have corrosion buildup on our connector. And whenever we do need to use it, we can simply drop it out the back hatch so long as we stay away from the latch mechanism, the weatherstripping will provide enough cushion to where it won't damage our wire.Now, our wiring is custom designed for our CRV. We're not going to have to cut or splice into any factory wiring at all and in fact there is simply just going to be one connector that we're going to plug in behind this panel on the inside to get it working.



Best 2019 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom fit vehicle wiring options available for the 2019 Honda CR-V all-wheel drive. Now both that we're going to take a look at today, we have one from CURT and one from Tekonsha, give us a four-pole flat trailer connector. That's going to give you the ground that you need, it's going to give you your running light signal whether you want to use a cargo carrier or a trailer behind your CR-V, it's going to give you your left turn and brake signal and right turn and brake signal, so the three major or the four major functions that we need to safely operate our trailer or notify people when we intend to turn, brake, or something like that.Now these wiring harnesses are designed to stay in the back of your CR-V when they're not in use, so we don't have the wiring connector out here on the outside of the vehicle where it's going to wind up with corrosion, issues like that. Whether you choose the Tekonsha or the CURT, these can easily be tucked up and stored underneath that storage panel in the back so you don't have any issues. You can see they've both got a cover here. I like to use that cover just to wrap up my excess wiring, loop that around, close it up, keep everything nice and tidy.



Best 2018 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom fit vehicle wiring options available for the 2018 Honda CR-V all-wheel drive. Now both that we're going to take a look at today, we have one from CURT and one from Tekonsha, give us a four-pole flat trailer connector. That's going to give you the ground that you need, it's going to give you your running light signal whether you want to use a cargo carrier or a trailer behind your CR-V, it's going to give you your left turn and brake signal and right turn and brake signal, so the three major or the four major functions that we need to safely operate our trailer or notify people when we intend to turn, brake, or something like that.Now these wiring harnesses are designed to stay in the back of your CR-V when they're not in use, so we don't have the wiring connector out here on the outside of the vehicle where it's going to wind up with corrosion, issues like that. Whether you choose the Tekonsha or the CURT, these can easily be tucked up and stored underneath that storage panel in the back so you don't have any issues. You can see they've both got a cover here. I like to use that cover just to wrap up my excess wiring, loop that around, close it up, keep everything nice and tidy.



Best 2017 Honda CR-V Trailer WIring Options

Today we're going to be taking a look at the best custom fit vehicle wiring options available for the 2017 Honda CR-V all-wheel drive. Now both that we're going to take a look at today, we have one from CURT and one from Tekonsha, give us a four-pole flat trailer connector. That's going to give you the ground that you need, it's going to give you your running light signal whether you want to use a cargo carrier or a trailer behind your CR-V, it's going to give you your left turn and brake signal and right turn and brake signal, so the three major or the four major functions that we need to safely operate our trailer or notify people when we intend to turn, brake, or something like that.Now these wiring harnesses are designed to stay in the back of your CR-V when they're not in use, so we don't have the wiring connector out here on the outside of the vehicle where it's going to wind up with corrosion, issues like that. Whether you choose the Tekonsha or the CURT, these can easily be tucked up and stored underneath that storage panel in the back so you don't have any issues. You can see they've both got a cover here. I like to use that cover just to wrap up my excess wiring, loop that around, close it up, keep everything nice and tidy.



Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2015 Honda CR-V

Today on our 2015 Honda CRV we're going to be taking a look at, and I'm going to show you how to install the Hopkins plug-in simple vehicle wiring harness with 4-pole flat trailer connector, part number HM11143274.This is what our wiring looks like when it's installed. This is going to be all the proper lighting functions to safely haul something. It's going to give you both terms, so you don't lose your running light, brake lights, and your ground. It's also going to come with a nice dust cap that's going to help cover your connection points from any dirt, debris, and moisture.When you're not using it, you simply roll it up and you can store it inside the vehicle with your spare tire. When you want to use it, simply pull it out. You want to make sure you go over the rubber seal, stay away from any attachment points or connection points that your hatch is going to make, and you can close your hatch right on it.The first thing we need to do to start our instillation, we need to remove our cover here, if you have one, and set it aside.



Trailer Wiring Harness Installation - 2016 Honda CR-V

Today on our 2016 Honda CRV, we're going to be taking a look at and showing you how to install the current T-connector vehicle wiring harness with a 4-pole flat trailer connector, part number C56158.So, here's what our wiring's going to look like once we have it installed. It is going to provide us with a 4-pole flat trailer connector and all the circuits we need to safely get down the road, like our tail lights, turn signals, and our brake lights.Whenever we're not using it, it is designed to stay on the inside of the vehicle, so we can simply lift our hatch open, and we can store it down by our spare tire. When we do want to use it, we can simply pull it out and so long as we stay away from the latch area, the weather stripping will have enough cushion that it won't damage our wire. Then we can simply close the hatch, and we can hook up.Now, wiring is going to be a custom fit for a CRV. We're not going to have to cut or slice anything. We're just going to have one T-connector that's going to go behind the drivers side panel here.



Trailer Wiring Harness Installation - 2009 Honda CR-V

Speaker 1: Here on this 2009 Honda CRV, we're going to be having a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55106. Here's what our wiring looks like installed. This 4-Pole Flat Wiring Harness is going to give you the basic lighting functions that are required by law in order for you to safely and legally tow a trailer. This green wire, this is what provides your right turn signal and right brake light. The yellow wire provides your left turn signal and left brake light. And on each one of these wires, we have a total power output of 3 amps, which is more than sufficient to tow a small trailer with two incandescent light bulbs per side, or as many LEDs as you want because they do draw less power.The brown wire, this is what provides our taillight and our running light signal for all the clearance lights on our trailer, and on this wire we have a total power output of 5 amps, so we could run several incandescent lights on it, or as many LEDs you want.



Tekonsha T-One Vehicle Wiring Harness Installation - 2018 Honda CR-V

Speaker 1: Today on this 2018 Honda CR-V we'll be having a look at and showing you how to install a Tekonsha T-One vehicle wiring harness with a four-pole flat trailer connector, part number 118741.Here's what your wiring harness looks like installed. Now, the reason you're gonna want a four-pole flat wiring harness like this is that this gives you the ability to safely and legally tow a trailer by having the necessary lighting functions that are required by law. This wire here with the white stripe, that is our ground wire, and that will provide the necessary ground connection between our CR-V and our trailer. This wire here with the brown stripe, that is our taillight and running light circuit. And on that circuit we have a total power output of 7.5 amps, which is more than sufficient to tow a small trailer with several incandescent light bulbs or as many LEDs as we want, because they do draw less power.This wire here with the yellow stripe, that's our left turn signal and left brake light, this wire here with the green stripe, that is our right turn signal and right brake light. Now, on each one of these wires we have a total power output of five amps per side, which is more than sufficient to tow a trailer with three or four incandescent light bulbs on each side or, again, as many LEDs as we want.One nice feature about this wiring harness is that it does have a dust cover to help better protect it when it's not in use.



Curt T-Connector Vehicle Wiring Harness Installation - 2018 Honda CR-V

Speaker 1: Today on this 2018 Honda CRV we'll be having a look at and showing you how to install the Curt T-connector vehicle wiring harness with a four-pole flat trailer connector, part number C56370.Here's what our wiring harness looks like installed. The reason you're gonna want a four-pole flat wiring harness like this one is so that you can safely and legally tow a trailer by having the necessary lighting functions that are required by law. This white wire provides the ground connection between our CRV and our trailer. This brown wire provides our taillight and running light circuit, and on that circuit we have a total power outlet of six amps. That being said, if you're towing a trailer that has incandescent lights, you wanna make sure you limit yourself to about two bulbs per side. If you're towing a trailer that has LEDs, you'll be much safer since LEDs do draw less power.



Best 2018 Honda Cr-V Custom Fit Vehicle Wiring Options

Speaker 1: Today on this 2018 Honda CRV we'll be having a look at our best trailer wiring options. Here we are with our CRV. Both of our wiring options are very similar here in the regards that both of them are installed inside the vehicle and reside there when they're not in use.On the left here we have the Tekonsha T-One, part number 118741. On the right we have the CURT T-Connector, part number C56370. The biggest difference we found as far as our wiring harnesses go is as far as power output is concerned. Our Tekonsha T-One here has a five-amp power output for our turn signal and our stop light circuits.



Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2013 Honda CR-V

Speaker 1: Today on our 2013 Honda CRV, we're going to be installing the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector; part number HM11143274.This 4-pole flat connector is going to provide you with all the necessary trailer lighting circuits that you need. It's going to have your left turn, right turn, brake lights and tail lights. This 4-pole flat connector's going to live inside your vehicle. You can coil it up and keep it tidied nice inside of your spare tire compartment. When you're ready to use it, you just uncoil it, drape it over the back, you do want to make sure you avoid your striker, so it doesn't get damaged, and you can shut your tailgate, plug it in to your trailer, and you're ready to go.It's okay that it's pinched between your lift gate and your bumper here. It's got a rubber cushion on both edges, that helps keep out moisture, so that'll allow this wire to sit in there freely without being pinched or damaged.The circuits going to be fuse protected, both at your vehicles fusebox and also back at the control unit for your 4-pole flat connector.



Trailer Wiring Harness Installation - 2017 Honda CR-V

Today on our 2017 Honda CRV, we'll be having a look at, and installing the Curt T-connector vehicle wiring harness for 4-pole flat trailer connector, part number C56370. Here's what our wiring looks like installed. As you can see, we have an adequate length wiring harness to hook up to our trailer. Now, this wiring harness gives us the functions that are required by law in order for us to safely tow a trailer. Our green wire here, is our right turn signal, and right brake light. Our yellow wire's our left turn signal, and left brake light. Both of these circuits here, we have a total power output of three amps per circuit for our brake light, and our turn signal functions.



T-One Vehicle Wiring Harness Installation - 2017 Honda CR-V

Today on our 2017 Honda CRV, we're going to take a look at and also show you how to install the Tekonsha T1 Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector. It's part number is 118741. Now, this is what your wiring kit's going to look like when you pull it out of your packaging. It's a very straightforward application. Basically in the rear of the vehicle there's going to be a 6-pin connector. We're going to plug that into and also ground out this wire.



Best 2007 Honda CR-V Trailer Wiring Options

Today, we're going to be taking a look at the best custom fit vehicle wiring options for your 2007 Honda CR-V. Up top, we've got the Tekonsha T1 Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118427. On bottom, we've got the CURT T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55106. The biggest difference that you're going to see between these two wiring harnesses is on the Tekonsha, the converter box is circuit protected. Even if there's a short in the trailer or in the wiring for our converter box, it's not going to go back and blow the fuse on the vehicle. The next difference we'll see is in the amperage ratings that's going to be on each circuit on the 4-pole wiring. With the Tekonsha, it's going to be rated at five amps on the tail light circuit and 2.1 amps on the stop and turn signal circuits. Where on the CURT, it's going to feature five amps on the tail light circuit but three amps on the stop and turn circuits.



Best 2008 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom fit vehicle wiring options for your 2008 Honda CRV. Up top we've got the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Part number 118427. On the bottom we've got the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Part number C55106. The biggest difference that you're going to see between these two wiring harnesses is on the Tekonsha, the converter box is circuit protected so even if there's a short in the trailer, or in the wiring for our converter box, it's not going to go back and blow the fuse on the vehicle. The next difference we'll see is in the amperage ratings that's going to be on each circuit on the 4-pole wiring. With the Tekonsha it's going to be rated at 5 amps on the taillight circuit, and 2.1 amps on the stop and turn signal circuits. On the Curt it's going to feature 5 amps on the taillight circuit, but 3 amps on the stop and turn circuits.



Best 2009 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom-fit vehicle wiring options for your 2009 Honda CRV. Up top, we've got the Tekonsha T-1 Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118427. On bottom, we've got the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55106. The biggest difference that you're going to see between these two wiring harnesses is on the Tekonsha, the converter box is circuit-protected so even if there's a short in the trailer or in the wiring for our converter box, it's not going to go back and blow the fuse on the vehicle. Then the next difference we'll see is in the amperage ratings that's going to be on each circuit on the 4-pole wiring. With the Tekonsha, it's going to be rated at five amps on the taillight circuit and 2.1 amps on the stop and turn signal circuits. Where on the Curt, it's going to feature five amps on the taillight circuit but three amps on the stop and turn circuits. The Curt features surface-mount technology, which is the way that the wires are connected to the connection points inside the converter box, which are going to help make for a much more reliable connection, even in rough road conditions. It's also going to help to reduce heat output inside out converter box. Another difference that we'll see is on the Tekonsha, it's got this white ground wire with a ring terminal at the end in order to ground it. Where on the Curt, the white wire is inside the connector that goes into the factory harness so it's going to be grounded through the factory ground in the harness.



Best 2010 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom-fit vehicle wiring options for your 2010 Honda CRV. Up top we've got the Tekonsha T1 vehicle wiring harness with four-pole flat trailer connector, part number 118427. On bottom we've got the CURT T-Connector vehicle wiring harness with four-pole flat trailer connector, part number C55106. The biggest difference that you're going to see between these two wiring harnesses is on the Tekonsha the converter box is circuit-protected so even if there's a short in the trailer or in the wiring for our converter box, it's not going to go back and blow the fuse on the vehicle. Then the next difference we'll see is in the amperage ratings that's going to be on each circuit on the four-pole wiring. With the Tekonsha it's going to be rated at five amps on the taillight circuit and 2.1 amps on the stop and turn signal circuits. Where on the CURT, it's going to feature five amps on the taillight circuit but three amps on the stop and turn circuits.



Best 2011 Honda CR-V Trailer Wiring Options

Today we're going to be taking a look at the best custom-fit vehicle wiring options for your 2011 Honda CRV. Up top we've got the Tekonsha T1 vehicle wiring harness with four-pole flat trailer connector, part number 118427. On bottom we've got the CURT T-Connector vehicle wiring harness with four-pole flat trailer connector, part number C55106. The biggest difference that you're going to see between these two wiring harnesses is on the Tekonsha the converter box is circuit-protected so even if there's a short in the trailer or in the wiring for our converter box, it's not going to go back and blow the fuse on the vehicle. Then the next difference we'll see is in the amperage ratings that's going to be on each circuit on the four-pole wiring. With the Tekonsha it's going to be rated at five amps on the taillight circuit and 2.1 amps on the stop and turn signal circuits. Where on the CURT, it's going to feature five amps on the taillight circuit but three amps on the stop and turn circuits.