View Cart

GMC Acadia Brake Controller

Select Vehicle Year

Brake Controller

Available Years for GMC Acadia Brake Controller

Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.

Brake Controller Manufacturers

Search For Custom Fit GMC Acadia Accessories
Select A Category Below

GMC Acadia Brake Controller Videos

Trailer Brake Controller Installation - 2012 GMC Acadia

Speaker 1: Today on our 2012 GMC Acadia we're gonna be taking a look at and showing you how to install the Tekonsha Prodigy P2 Trailer Brake Controller for one to four axles, part number 90885. In order to help us get it installed we're gonna be using the universal installation kit for trailer brake controllers, part number ETBC7.Here's what our brake controller looks like fully installed. It's a proportional brake controller, which mean's it's gonna apply the brakes to our trailer in the same amount and intensity as we're applying the brakes to our car. Because there's an internal inertia sensor we're not gonna have to worry about the angle that we mounted in the vertical plane, but we are gonna have to mount it nice and level and in the direction of travel.Now the C on our controller's gonna let us know that our trailer is connected. The blue dial on the left here is gonna be for our power. Our power level's gonna go all the way from zero if I hit the manual override button so we can see it it's gonna go all the way up to 13.

Trailer Brake Controller Installation - 2011 GMC Acadia

Today on this 2011 GMC Acadia, we're going to show you part number C51110. This is the Curt Venturer Trailer Brake Controller. On our install we'll be using parts of a towing package that's on the vehicle. One thing though, this does not have a total tow package on it, but there is some remnants leftover from the manufacturer of the vehicle, so we're going to fill in the blanks. To help us with our install, for the brake controller to plug in underneath the factory tow package underneath the dash, we'll be using part number C51422. This is the Curt Custom Wiring Adapter for Trailer Brake Controllers.

Trailer Brake Controller Installation - 2010 GMC Acadia

Today on our 2010 GMC Acadia we'll be installing the Etrailer Universal Install Kit for Brake Controllers, part number ETBC7 in conjunction with the Tekonsha Prodigy P2 Brake Controller, part number 90885. In addition we'll be using the Draw Tite No Drill Mounting Bracket, part number 18136.We'll begin by installing the seven pole bracket onto our seven pole connector. We'll use the hardware provided with our install kit securing the bracket to the connector. Then we'll take the no drill mounting bracket and secure it to the seven pole bracket with the hardware that's included. Now before I install the bracket onto the vehicle I'm going to go ahead and take some black electrical tape and wrap up these wires.Note for our application we'll not be using the purple wire which is for reverse trailer lights so we'll go ahead and clip it off as it will not be necessary. We'll wrap it up all the way until our first connection point.

Brake Controller with Wiring Installation - 2008 GMC Acadia

Today on this 2008 GMC Acadia we are going to be installing Prodigy Brake Controller part number 90185-3026P. We are going to start off inside the vehicle. The first thing we want to do is locate the port that we will be plugging our wiring harness into. The wiring harness is located on the driver side of the vehicle, below the steering column. It is just right of the emergency brake pedal back behind this black paneling here. :23