Ford F-350, 450, and 550 Cab and Chassis Off Road Lights

Hey Robert, The bracket kit #RP58386 you were looking at is a confirmed fit for your Ram but it's just the frame mounting brackets without any hardware included. If you're needing the hardware separately you can use part #58164. You can get…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Hi Alan; as long as you don't have the factory OEM wheel liners you can use the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT66MV on your 2025 Sierra 1500 Denali Ultimate.

Hello John. Great question, and congrats on the upgrade to the 3500. For your new 2015 Chevy Silverado 3500 I am showing that the TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TLC2219 will transfer over just fine as long as the truck is a…

I recommend installing the SumoSprings #SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren #TFERSD you found is much stiffer and…

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

As you haul your tires will start to generate heat and the temperature and psi will rise. The rating you're referring to is for when the tire is cold/not in use and is not the actual capacity of the tire. The max cold pressure is set low enough…

Yes, you can splice the Low Profile LED Flood Light #3371492135 to your vehicle reverse lights. These only draw 1.5 amps so it wouldn't be an excessive drain on your light circuit.

Hi Matthew; EcoHitch specifically states the factory active air dam will need to be removed for installation of the #EH89CR. If you want to install this hitch on your 2022 Tundra you will have to part with the air dam.

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The distance from the center of the mounting stud to the back of the housing on the Opti-Brite LED Work Light part #TLL64FB is 2-1/4".