2013 Honda Pilot Trunk Bike Rack

Features:

Designed for SUVs, minivans, and hatchbacks with spoilers, this versatile, trunk-mounted 3-bike rack has anti-sway cradles and independently adjustable arms. High-rise frame and multiple strap mounting options prevent damage to your spoiler.

Installation Notes:

If there is not a roof rack or usable roof rails, use the hatch anchors instead of metal hooks

Features:

This 2-bike trunk rack features a 4-strap mounting system and interlocking HUB for quick setup on your vehicle. The adjustable arms have SuperCush anti-sway cradles with ZipStrip straps for easy bike loading. Integrated locks secure bikes and rack.

Installation Notes:

Outer/Lower support frame rests on the trunk lip, hatch lid, or rear door

Do not use rear wiper when carrier is installed

Weight limit for 2 bikes is 60 lbs; for 3 bikes the limit is 90 lbs

For this vehicle, the upper hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the lower hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the upper and lower hooks must be changed and installed in anchor mode. See instructions for implementation

Features:

This 2-bike trunk rack features a QuickTrigger hub system for easy setup on your vehicle. The adjustable arms help to keep bikes level. StableCradle anti-sway cradles with removable ChainStraps allow for easy bike loading. Folds flat for storage.

Installation Notes:

Place the upper strap hooks at the top edge of trunk, hatch lid, or rear door

Outer/Lower support frame rests on the lower portion of the license plate, below the numbers

Place the lower strap hooks at the bottom edge of the trunk, hatch lid, or rear door

Side strap hooks to back side edge of trunk, hatch, or rear door next to tail lights

Weight limit for 2 bikes is 60 lbs

Features:

This 3-bike trunk rack features a QuickTrigger hub system for easy setup on your vehicle. The adjustable arms help to keep bikes level. StableCradle anti-sway cradles with removable ChainStraps allow for easy bike loading. Folds flat for storage.

Installation Notes:

Place the upper strap hooks at the top edge of trunk, hatch lid, or rear door

Outer/Lower support frame rests on the lower portion of the license plate, below the numbers

Place the lower strap hooks at the bottom edge of the trunk, hatch lid, or rear door

Side strap hooks to back side edge of trunk, hatch, or rear door next to tail lights

Weight limit for 3 bikes is 90 lbs

Features:

Carry 1 bike by the handlebars on the back of your hatchback, SUV, or minivan. 2 Vacuum cups with ratcheting straps attach to your rear window in seconds and won't scratch the glass. Includes small zippered carry case for easy storage.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This 3-bike trunk rack features a 4-strap mounting system and interlocking HUB for quick setup on your vehicle. The adjustable arms help to keep bikes level. SuperCush anti-sway cradles with removable ZipStrip straps allow for easy bike loading.

Installation Notes:

Outer/Lower support frame rests on the trunk lip, hatch lid, or rear door

Do not use rear wiper when carrier is installed

Weight limit for 2 bikes is 60 lbs; for 3 bikes the limit is 90 lbs

For this vehicle, the upper hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the lower hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the upper and lower hooks must be changed and installed in anchor mode. See instructions for implementation

Features:

This 2-bike trunk rack features a 4-strap mounting system and interlocking HUB for quick setup on your vehicle. The adjustable arms help to keep bikes level. SuperCush anti-sway cradles with removable ZipStrip straps allow for easy bike loading.

Installation Notes:

Outer/Lower support frame rests on the trunk lip, hatch lid, or rear door

Do not use rear wiper when carrier is installed

Weight limit for 2 bikes is 60 lbs; for 3 bikes the limit is 90 lbs

For this vehicle, the upper hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the lower hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the upper and lower hooks must be changed and installed in anchor mode. See instructions for implementation

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This 3-bike trunk rack features a 4-strap mounting system and interlocking HUB for quick setup on your vehicle. The adjustable arms have SuperCush anti-sway cradles with ZipStrip straps for easy bike loading. Integrated locks secure bikes and rack.

Installation Notes:

Outer/Lower support frame rests on the trunk lip, hatch lid, or rear door

Do not use rear wiper when carrier is installed

Weight limit for 2 bikes is 60 lbs; for 3 bikes the limit is 90 lbs

For this vehicle, the upper hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the lower hooks must be changed and installed in anchor mode. See instructions for implementation

For this vehicle, the upper and lower hooks must be changed and installed in anchor mode. See instructions for implementation