Flat Tow Brake System Specs:
Features:
...Guarantees smooth, reliable braking Reads RV's brake light signal to ensure system only activates when you actually hit the brakes Senses the rate of your RV's dece...
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
...Guarantees smooth, reliable braking Reads RV's brake light signal to ensure system only activates when you actually hit the brakes Senses the rate of your RV's dece...
More Information >Flat Tow Brake System Specs:
Features:
...brakes only when needed: no false braking Plug in and go System automatically turns on when you connect your towed car to the RV Low-profile components install permanently and stay tucked out of sight...
More Information >Flat Tow Brake System Specs:
Features:
...Get automatic braking in your towed vehicle when you press the brakes in your RV Cable pulls towed car's brake pedal smoothly down when the system activates System activates only ...
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
...Applies brakes only when needed: no false braking Plug in and go System automatically turns on when you connect your towed car to the RV Low-profile components install permanently and stay tucked out...
More Information >Flat Tow Brake System Specs:
Features:
...Supplemental braking system applies towed vehicle's brakes in proportion to braking action of RV Towed car's brakes are activated at the same time and with the same i...
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
...a Braking System for Flat Towing? A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's bra...
Installation Notes:
The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Videos
for Tow Bar Braking Systems
Help Articles
for Tow Bar Braking Systems
Expert Answers
for Tow Bar Braking Systems
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect…
view full answer...Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to…
view full answer...Hi Randy, For your 2022 Jeep Gladiator I have the following flat towing component recommendations: Baseplate: If you have a standard model with a factory bumper or a Rubicon with a factory bumper then you can use the Roadmaster Direct-Connect Base…
view full answer...There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…
view full answer...If your 2020 Jeep Gladiator activates the brake lights when the brake pedal is pressed with the key off then with the install of the SMI DUO part #SM99251 you will also need to install the brake lite relay part #RM-88400 so that the stoplights of…
view full answer...What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…
view full answer...It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System #HM39494. I cut out some pages from the instruction manual for you to check out, but what…
view full answer...Hey Ron, thanks for reaching out! The Putco Classic Chrome Decorative Pillar Posts #P402678FD are for an F-150 so we will get that updated. For your 2024 Ford F-250 Super Duty you'll want to go with the…
view full answer...So the DUO does not need your vacuum assist brakes to have vacuum to push the brakes hard enough to stop the vehicle. The system basically is strong enough to be able to press the pedal hard enough without the vacuum assist.
view full answer...Filter Products (14)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD