Snow Plow Specs:
Features:
You're a homeowner who'd rather get the job done than wait on a plow truck. This easy-mount snowplow helps you clear your driveway before sunrise and stay warm in your cab while you do it.
More Information >Snow Plow Specs:
Features:
You're a homeowner who wants commercial power and professional results. This hydraulic snowplow gives you full control from your 1/2-ton cab and clears a wide path with each pass, so you can handle big storms and finish your long driveway.
More Information >Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
Hey Phil. The Custom Mounting Brackets for Detail K2 Snowplows item #K282630 are the correct ones for your 4WD 2018 Chevy Colorado. The brackets are compatible with the following snow plows: Detail K2 Rampage II Snowplow item #K2RAMP8219 Detail K2…
view full answer...Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…
view full answer...Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…
view full answer...Hey Steve. To replace the remote on your SnowBear Snowplow for 2" Hitches item #K2AVAL8219, you'll need the Replacement Wireless Remote Control for Detail K2 Snowplows item #K2WR100. The remote is programmed specific to the black solenoid…
view full answer...Hey Gary. The Draw-Tite Front Hitch item #65031 is going to mount a bit higher on your 2004 Toyota Tundra compared to the Curt item #31180. The Curt Front Hitch item #31180 is 14-3/4" off the ground when measured from the top of the inside of…
view full answer...Thanks for your question, Shannon! I reached out to SnowBear to confirm which blade would be the replacement part. They let me know that part #K2SB8200 is the correct part you would need. It comes as 3 pieces totaling to the 82" that your plow…
view full answer...Hello Nathan, Yes, the Custom Mounting Brackets for Detail K2 Snow Plows #K256ZR are the correct custom mounting brackets to mount your Detail K2 Snow Plows on your 2026 Ram 2500 Diesel. In order to install, MUST REMOVE DROP TUBES ON BOTTOM OF FRAME.…
view full answer...The SnowBear snow plows have two mounting options on your 2019 Ford F-250. One is the brackets #K281530 and the other is the Curt Front Mount Trailer Hitch #C31078. I would choose the front mounted hitch since it will allow you to use other…
view full answer...The wireless remote of the K2 Detail plow part #K2SUMM8826ELT only controls the up and down function of the plow and now the angle from side to side.
view full answer...Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…
view full answer...Hey Scott! The etrailer Anti-Rattle Hitch Collar #e55YV is rated for up to 10,000 lbs gross trailer weight and won't reduce the capacity of a properly matched towing setup. As always, your actual towing capacity is determined by the lowest-rated…
view full answer...Hey Mike, congratulations on the new truck! You can definitely use the two together. The Curt StowPro 2-Ball Mount #C34FR53HY uses a standard 2-1/2" shank, making it a great match for our etrailer Anti-Rattle Hitch Collar #e55YV. It installs…
view full answer...Filters
- 2 results
Contact and Help
What our customers are saying:
The phone operator was very helpful and made my purchase easy. I will keep this website handy.
Harold
Gillsville, GA