These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
Heavy-duty jacksstabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Features: Stabilizingjacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Hi Barry; we don't have a list of trailers customers have added the etrailer Scissor Stabilizer Jacks #e56VV onto. Trailer manufacturers use a variety of scissor jacks even on the same model trailer. They're often using whatever they have…
The Rhino Rack Pioneer Platform Rack #RR42114BF inlcudes mounting hardware that will allow you to mount the rack in the T-slots of your vortex aero bars or wraparound the bars with the clamp mount. I've linked our review video of the product that…
Rhino Rack offers versions of their Pioneer Platforms that fit aero bars with the part #RR42114BF for a 48 inch by 38 inch platform or the part #RR42115BF which is 58 by 47 inch.
You could use pvc pipe and secure it to the frame of the trailer, but that is way overkill and way more work then you need to do to protect the wires. I would just get some wire loom the correct size for however many wires you have to run, and some…
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
The Dometic RV Water Heater #DMC74FR is our only gas/electric tank type water heater. It will require you to modify your opening slightly as it requires a cutout 12-3/4" tall by 12-3/4" wide. Then you will need the Water Heater Door…
Hey Ben, the total height of the etrailer jack part #e34RV when fully retracted is 16-1/2 inches. Would that fit in the area you have between the fender and rear supports?
The handle on the Ultra Faucets 6" Drinking Faucet #277-000189 does not have to be held down to dispense water, it will continue to flow. The spout of this faucet is not flexible.
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
If your electrical distribution system is not rated for 30 amps you should not be trying to plug into a 30 amp RV power pedestal at a camp site. From the attached images you are correct, you obviously have a 20 amp plug as it is clearly labeled for…
Hey Thomas, welcome back! And thanks for all of the info you listed on your 2021 Forest River Rockwood Minilite. Based on that I would recommend going with the higher rated scissor jacks part #e96VV which are rated for 15k for the pair. Are you…
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 24". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Upgrade the strength and durability of your stabilizerjack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizerjack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailer Stabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 33" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. ... Beyond that height, the stabilizer does not have a weight capacity rating. Always be sure to raise the jacks equally to avoid bending or twisting your camper's frame, or putting uneven weight on any one the stabilizer legs.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper or trailer Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 30" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 24" 12 Month warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizerjack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizerjack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 24" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Drop-leg jackstabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-leg stabilizingjack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 6-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Handle (e46VV) sold separately Specs: Lift: 24" Support capacity: 7,500 lbs Quantity: 1 jack Limited lifetime warranty
... The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 8-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black powder coated finish resists corrosion Handle (TJSC-24-HD) sold separately Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10-1/4" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" Support capacity: 2,500 lbs Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Filters
