Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Lift makes this jack ideal for multiple agricultural and commercial applications.Features: Utility jack lets you raise and lower your A-frame trailer Perfect for agricultural and commercial applications Topwind handle has textured grip for easy cranking Easily flip between cranking and stored positions Drive-nut option lets you use your power drill and 3/4" socket head (not included) for faster operation Black powder coat finish resists corrosion Removable foot pad with locking pin included Specs: Bracket Height: Retracted: 9-3/4" Extended: 23-1/2" Lift: 14" Clearance: 13-1/8" From bottom of mounting bracket to top of jack 16-1/2" From bottom of mounting bracket to top of handle Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6" Footplate diameter: 5-3/8" Lift capacity: 2,000 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Replaces the liftingnut for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the liftingnut for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Measurements: 17-3/4" long x 3-1/2" wide Quantity: 1 liftingnut Fits: Curt heavy-duty, direct-weld square jack: 28512
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and liftnut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series jacks Includes: 1 ACME rod 1 Liftnut Specs: Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Liftnut fits 3-1/2" x 3-1/2" square jack inner tube Note: This replacement rod and nut will not work on your jack if you do not have an octagonal bushing as shown below - typically if your jack is older than 2014.
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.If the drill isn't nearby, just flip the handle back up and crank it manually. 2,000 lbs of Lifting Capacity With a 2,000-lb maximum capacity and 14" of travel, this jack handles the tongue weight of loaded campers, utility trailers, and other towables.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. ... Highlights Faster Hitching With Drill Power: Run the jack with a drill so the coupler lifts quickly and hookup stops dragging on. 2,000-Lb Capacity For Loaded Tongues: Handle tongue weight without the jack binding so you can keep lifting through hookup. 14-Inch Lift Range For Clearance: Adjust height so the coupler meets the ball without stacking wood.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.If the drill isn't nearby, just flip the handle back up and crank it manually. 2,000 lbs of Lifting Capacity With a 2,000-lb maximum capacity and 14" of lift, this jack handles the tongue weight of loaded campers, utility trailers, and other towables.
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
The only rod and nut replacement we currently offer, part #TJD-12000-RODNUT, is a bit smaller than the one you have so the only option that we can offer would be a complete replacement of the jack. You'd want to check the GVWR of the trailer and…
I spoke to my contact at Bulldog and showed him the picture you submitted and he said that in March 2003 they upgraded the screw kit in all of the Bulldog jacks and that what you have has been discontinued. There are no screw and nut kits available…
Yes, the Fulton XLT Bolt-Thru Swivel Trailer Jack #F141132 that you referenced is designed to fit the same style of mounting bracket that you have in the picture you submitted. This jack will bolt right up.
I reached out to the company that builds the Ram Gooseneck Coupler item #GCSQTW-30008 , Pacific Rim International Factory, and was not able to get an exploded parts diagram. I have listed all of the replacement parts below that are available.…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 12,000-lb lift capacity and a 15,000-lb static capacity. Designed for TJD-15000 Series jacks.Features: Replaces the threaded ACME rod and liftnut from your etrailer and Ram square, direct-weld jacks with a 12,000-lb lift capacity and a 15,000-lb static capacity Designed for TJD-15000 Series jacks Includes: 1 ACME rod 1 Liftnut Specs: Lift capacity: 12,000 lbs Static capacity: 15,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Liftnut fits 3-1/2" x 3-1/2" square jack inner tube
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable electric camper jacks helps you load and unload your camper with ease.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable camper jacks helps you load and unload your camper with ease.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable camper jacks helps you load and unload your camper with ease.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable electric camper jacks helps you load and unload your camper with ease.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Specs Dimensions: Retracted: 76-5/8" long x 14" wide x 6-1/4" tall Extended: 76-5/8" long x 14" wide x 26-5/8" tall Extension: 20-1/4" Footplate dimensions: 7-1/2" long x 4" wide Drill Compatibility: Cordless, non-impact drill: 18V to 24V Includes socket-bit adapter Mounting: Bolt-on installation Requires (4) 1/2"-13 bolts (typically 2"-3" long), plus washers and nuts Compatible with most trailer frame widths Weight Capacity: Stabilizes your trailer, but isn't built for lifting or leveling. Construction: Steel frame with wrinkle black powder coat Weather-resistant finish Warranty: 1-Year limited
Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swivel jack accepts a 3/4" socket so a drill does the lifting. ... If the drill isn't nearby, flip the handle back up and crank it manually. 1,500 lbs of Lifting Capacity With a 1,500-lb maximum capacity and 12" of travel, this jack handles the tongue weight of boat trailers during hookup and storage.
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.With this electric jack, you just wire up the included pigtails to your 12-volt system, press the switch, and let the motor do the lifting. The jack shuts off automatically at the highest and lowest points, so there's no guesswork or risk of overextending. Hauling a loaded camper, taking livestock to the fair, or bringing the ATVs along is no problem with 3,500 pounds of lifting power.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of lift.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
This leveling scissor jack with a 2,500-lb capacity will keep your RV level and stable. It adjusts from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. The system collapses for compact storage.Hook the strap into each footpad and ratchet the strap to tug the stabilizing legs tight. This will tension the stabilizer, which will lift up at the hitch just enough to brace and steady the rear of your RV. When your trip is over, all you have to do is release the strap, unpin the legs, and fold the stabilizer up before removing it from your hitch.
Replaces 1 jack for your HappiJac truck camper jack system. Works on manual or electric systems (LC736515-4 or LC736515-ELKIT). Maintenance-free Acme screw allows for smooth cranking.Features: Replaces 1 jack for your HappiJac truck camper jack system (LC736515-4 or LC736515-ELKIT) Smooth, easy cranking thanks to maintenance-free Acme screw Self-lubricating nut prevents overextension of jack Square tubing provides superior strength and durability Concave footpad reduces movement and provides increased stability Locking lever keeps jack at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Made in the USA Specs: Capacity: 2,800 lbs Lift: 36-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty
Replaces 1 jack for your HappiJac truck camper jack system. Works on manual or electric systems (LC736514-4 or LC736514-ELKIT). Maintenance-free Acme screw allows for smooth cranking.Features: Replaces 1 jack for your HappiJac truck camper jack system (LC736514-4 or LC736514-ELKIT) Smooth, easy cranking thanks to maintenance-free Acme screw Self-lubricating nut prevents overextension of jack Square tubing provides superior strength and durability Concave footpad reduces movement and provides increased stability Locking lever keeps jack at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Made in the USA Specs: Capacity: 2,200 lbs Lift: 34-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty
Filters
