Option for a Damaged Nut and Screw in a 10k Bulldog Landing Gear Jack

Updated 01/02/2015 | Published 12/31/2014

Products Featured in This Question

Replacement Jack Screw and Nut Kit for Bulldog Topwind Trailer Jacks with 10,000-lb Lift Capacity

(18)

$83.96

Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs

(55)

$231.45

Question:

here is a pic of the screw and nut that came out of my jack. do you have a repair kit for it I have taken the jack apart and the screw nut is different than the ones you have pictured 180 series,12000 lbs static and 10000 lbs lift stamped on the bottom of the main body it says Mexico 02 I have a picture of the label on the jack if you want I can email or text it to you

asked by: Henry M

Expert Reply:

I spoke to my contact at Bulldog and showed him the picture you submitted and he said that in March 2003 they upgraded the screw kit in all of the Bulldog jacks and that what you have has been discontinued. There are no screw and nut kits available that will replace what you have in your jack.

Your only real solution at this point would be to remove your jack and install a new one like part # BD182411. Another option you would have would be to leave the outer leg installed on your trailer and install the internal components of the # BD182411.

expert reply by: Jameson C