Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. ... Features: Cross braces permanently attach to your scissor jacks to reduce your RV's movement while parked Braces extend and retract with scissor jacks for easy setup and storage Included tension handle lets you adjust the braces for maximum stability Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Tube dimensions: Fully retracted: 69" long x 1" wide Fully extended: 78" long x 1" wide Weight: 20 lbs 1-Year limited warranty Notes: Bolts securing the footplate and mounting plate to jack must be 3/8" in diameter.
Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. ... Features: Cross braces permanently attach to your 5th wheel's landing gear to reduce your trailer's movement while parked Braces extend and retract with landing gear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landing gear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landing gear legs.
You've got the RV leveled and stabilizers down, but the coach still shakes once bikes are hanging off the back. This stabilizer mounts to most 2" bike rack shanks and uses ratchet tension to steady the RV while you move around camp.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. ... The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power. This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Minimize chassis movement in your travel trailer with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
You will need to choose a jack whose capacity exceeds the fully loaded and ready to tow tongue weight of your trailer. Typically trailer tongue weight is 10-15 percent of the weight of the trailer. This means that when loaded to maximum, your tongue…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
Black powder coated A-frame jack has a retracted height of 9" and an extended height of 24". Zinc-finished sidewind handle arm provides a sleek look. Footplate sold separately.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion Bolt-on installation (hardware not included) Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): Retracted: 9" Extended: 24" Lift: 15" Outer tube diameter: 2-3/8" Inner tube diameter: 2" Handle radius: 6-1/4" Support capacity: 2,000 lbs 90-Day warranty This manual sidewind jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
If your setup feels a little shaky, this center brace helps tighten things up by linking your stabilizer legs together. It's a simple way to add extra support on smaller or narrower units and cut down on unwanted movement.Highlights Reduce Stabilizer Leg Movement: Center brace links 2 legs together for added support. Tighten Up Smaller Setups: Brace reduces movement on smaller or narrower units. Fit Quick Drop Stabilizers: Works with quick drop stabilizer setups using a short crossmember design.
Cross brace bar permanently attaches to your RV's scissor jacks to reduce your trailer's side-to-side movement while parked. Once installed, the brace will extend and retract along with your scissor jacks for easy setup and storage.Features: Cross brace permanently attaches to your RV's scissor jacks to reduce your trailer's side-to-side movement while parked Pair with Ultra-Fab Eliminator II front-to-back stabilizer system (UF74FR - sold separately) for additional stability Brace extends and retracts with scissor jacks for easy setup and storage Automatically moves into place when you lower your jacks without the need for T-handles, twist locks, or thumb screws Easy installation with included hardware Mounts to either your front or rear set of jacks Made in the USA 1-Year limited warranty Note: Not compatible with BAL low-profile scissor jacks.
Complete stabilizer system permanently attaches to your RV's scissor jacks to reduce front-to-back and side-to-side movement while parked. Once installed, the braces will extend and retract with your scissor jacks for easy setup and storage.Features: Stabilizer system permanently attaches to your RV's scissor jacks to reduce your trailer's front-to-back and side-to-side movement while parked Braces extend and retract with scissor jacks for easy setup and storage Automatically move into place when you lower your jacks without the need for T-handles, twist locks, or thumb screws Easy installation with included hardware Front-to-back brace attaches to one scissor jack and any corner of your RV frame Side-to-side brace mounts between your front or rear set of scissor jacks Made in the USA 1-Year limited warranty Note: Not compatible with BAL low-profile scissor jacks.
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. The system collapses for compact storage.This will tension the stabilizer, which will lift up at the hitch just enough to brace and steady the rear of your RV. When your trip is over, all you have to do is release the strap, unpin the legs, and fold the stabilizer up before removing it from your hitch.
Stabilizer permanently attaches to your RV's scissor jack to reduce trailer's front-to-back movement while parked. Once installed, the brace will extend and retract along with your scissor jack for easy setup and storage.Features: Stabilizing brace permanently attaches to your RV's scissor jack to reduce your trailer's front-to-back movement while parked Pair with Ultra-Fab Eliminator II side-to-side stabilizer system (UF84FR - sold separately) for additional stability Brace extends and retracts with scissor jack for easy setup and storage Automatically moves into place when you lower your jack without the need for T-handles, twist locks, or thumb screws Easy installation with included hardware Attaches to one scissor jack and any corner of your RV frame Made in the USA 1-Year limited warranty Note: Not compatible with BAL low-profile scissor jacks.
The Wobble Stopper helps eliminate sway and reduces stress on your camper's frame. Clamp one end of each stabilizing strut onto your square camper jack and attach the other end to your camper's frame with the locking, lever-action handle.Features: Stabilizes camper and reduces wear on camper frame Braces landing gear legs to help prevent sway while camper rests on jacks Makes it more comfortable in camper by eliminating sway and rocking Helps prevent camper theft Struts secure with included, keyed-alike pin locks Adjusts and installs easily Strut arm telescopes in and out to achieve perfect fit Lever-action handles make connecting and disconnecting from camper a breeze Constructed of stainless steel and aircraft-grade aluminum Powder coated for corrosion resistance Installs quickly and easily Just pop up the FastGun handle to release, swing the strut in place, hook it to the camper plate, and push down the handle to fasten Stow up against camper jack leg when not in use Made in the USA Specs: Application: square camper jacks Quantity: 2 stabilizers Lifetime warranty
The Wobble Stopper helps eliminate sway and reduces stress on your camper's frame. Clamp one end of each stabilizing strut onto your round camper jack and attach the other end to your camper's frame with the locking, lever-action handle.Features: Stabilizes camper and reduces wear on camper frame Braces landing gear legs to help prevent sway while camper rests on jacks Makes it more comfortable in camper by eliminating sway and rocking Helps prevent camper theft Struts secure with included, keyed-alike pin locks Adjusts and installs easily Strut arm telescopes in and out to achieve perfect fit Lever-action handles make connecting and disconnecting from camper a breeze Constructed of stainless steel and aircraft-grade aluminum Powder coated for corrosion resistance Installs quickly and easily Just pop up the FastGun handle to release, swing the strut in place, hook it to the camper plate, and push down the handle to fasten Stow up against camper jack leg when not in use Made in the USA Specs: Application: round camper jacks Quantity: 2 stabilizers Lifetime warranty
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted feeling, like your rig's anchored in place.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Replaces the jack leg for your Bigfoot 8K hydraulic jacks.Features: Replaces the jack leg for your Bigfoot 8K hydraulic jacks Works with all 8K square leg Bigfoot hydraulic jacks Includes jack leg and foot Cylinder and pump not included Made in the USA
Replaces the right jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
Replaces the left jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. Drop Leg Adds Reach: Extends up to 4-1/2" to reduce jack travel during setup. Protected for Weather: Weatherproof buttons, crank cover, canvas jack cover, and black powder coat help protect the jack.
Use your drill to raise and lower your trailer, then check tongue weight before you tow. This kit pairs a 2,000 lb A-frame jack with a jack foot tongue weight scale so you can adjust cargo and verify the load during setup.Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. 14" Lift: Manual A-frame jack lifts trailer tongue weight through the hitching and unhitching process.
Filters
