Set up: MORryde 5th Wheel Cross Brace Landing Gear Stabilizer on a 2018 Jayco Eagle Fifth Wheel Video

Hey Johnny, thanks for reaching out! I highly recommend using the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 as a replacement for your 8532-07 motor. According to my research your motor is rated for 5,500 lbs so this motor…

To replace your WF-9865LIS converter I recommend the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR. This converter is compatible with lead acid, AGM, and LiFePO4 batteries and has a 60 amp converter rating. It installs the same way…

There basically is no difference between the part numbers you mentioned. We have the part #MCL95AB but the MCL95AS appears to be a way to order the same light in a different packaging. Both have a stainless steel base and bolt. This is submersible.

The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…

Installation of a replacement pin box like the Lippert 1621 5th Wheel Pin Box - 18,000 lbs #LC1191151 does not raise the overall height of a 5th wheel trailer, but it may give more adjustability to the height of the king pin. I've attached an…

The Stromberg Carlson Base Pad Extreme for RVs and Trailers #SC28VR will work with your 2019 Grand Design Solitude if your current base pads are 1 inch or 2 inch thick. These can be used on soft surfaces like hot asphalt or sand. The base pads are…

Yes, the front jacks aren't lifting the full GVWR of your 2021 Jayco Pinnacle 5th wheel so you'll be able to use the Stromberg Carlson Base Pad Extreme for RVs and Trailers - 6,000lbs - Qty 2 Item #SC28VR. Most of your weight is held up by…

As long as your Andersen Blocks are 9" in diameter and have a lip of around 1/8" you should be fine using the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 Item #SP54FR4. If you have issues keeping…

The Lippert Components 5th Wheel RV Landing Gear Foot Pad #LC314667 are absolutely an upgrade over standard foot pads for power landing gear systems. The reason for that is 2-fold: 1) they are large at 9 inches in diameter which means they are much…

Due to the "snap-on" design of the SnapPad XTRA XL Plus Jack Pads for Lippert Leveling Systems w/ 9" and 12" Round Jack Feet #SP54FR74 you wouldn't want to stack multiple pads together. The sidewalls of the pads are meant just…

I went out to the warehouse and pulled Replacement Stand-Off or Insert Nut #FST-9975 to measure it. The inner diameter is 0.209 inches (5.32mm). The thread depth is approximately 1/4 inch and there are 5 threads so that would be 20 threads per inch.…

Yes, the replacement stand-off/insert nut #FST-9975 fits either exterior RV ladder #LA-401 or the RV bunk ladder #LA-460 or #LA-466 by being inserted into the end of the stand-off.