This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. ... To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. ... Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mounting bracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flattowing. Diodes protect your car from damage from electrical feedback. ... Features: Carries turn and brake signals from RV to towed vehicle while flattowing Prevents feedback that can damage your vehicle's electrical components with diodes Protects diodes from the elements with heat-sealed casing Includes: 4 Diodes 4-Wire harness with 4-way flat connectors 12 Spade connectors 4 Quick-splice wire connectors 6 Zip ties 1 Ring terminal Made in the USA Specs: Wiring harness length: 26' Wire gauge: 16 Max voltage: 24 volts 1-Year warranty Note: This kit wires your towed car as a combined lighting system, meaning that the brake and turn signals travel along the same wire.
... Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Wiring harness length: 20' Wire length between lights: 4-1/2' Separate wire with 4-way for tow vehicle : 3' long Bulb type: 2057 double filament 3-Year limited warranty on housing and wiring only Will These Magnetic Lights Work On My Vehicle?
Complete the Safe Haul factory prep package on your 2019 or newer Spartan motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. Includes an air jumper hose with the Safe Haul-specific fitting.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up. To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…
Hey Sean. The Roadmaster Falcon 2 Tow Bar item #RM-525 is just the tow bar with a set of adapters for a Blue Ox baseplate. It has no electrical wiring, safety chains, or braking system. You'll need to purchase those separately along with a…
Hey Jan, thanks for reaching out. Yes I can provide a full parts list for that. Assuming you don't already have a rear trailer hitch, here is what I recommend for pulling the utility trailer: - etrailer Trailer Hitch Receiver - Custom Fit - Matte…
Hello Denny, My apologies for the delay, getting this battery added to our site took a little more time that expected. You will want the Replacement 12V Sealed LeadAcid Battery for Lite-it Wireless Lights #CU24BR to replace your battery in your…
Since you have 3/4 inch thick D-rings you need the part #BX88357 since you have a Blue Ox tow bar. If you had a Roadmaster tow bar instead you'd want the #RM-035.
Deciding between flat towing your vehicle with all four wheels down or using a tow dolly partly boils down to your preference and application. For your Jeep Wrangler, I recommend going with a flat towing setup. This is going to be simpler to…
The Adapter for Jeep D-Ring Bumper Mounts part #RM-035 is a great option for flat-towing a 2021 Jeep Wrangler with aftermarket front bumper. It can be used with any motorhome mounted Roadmaster tow bar for which I recommend the Roadmaster Nighthawk…
Hi Milo, We don't currently offer a front bumper and winch for your 2022 Jeep Wrangler but I can say that what you're going to need to look for is how the new bumper would mount to the frame rails. The etrailer Invisible Base Plate Kit…
The Replacement Breakaway System for Brake Buddy Classic and Select Supplemental Braking Systems part #HM39340 replaces the brake away switch for the brake buddy Classic II, Select II, Classic 3 (#HM39494), and Select 3 (#HM39524). We have not yet…
There is one tow bar I really like for your 2018 Jeep Wrangler Rubicon Recon that is compatible with the etrailer Classic Base Plate Kit #e98947: - etrailer SD Non-Binding Tow Bar #e34ZR I like the #e34ZR the best because it offers the best value for…
Complete the factory prep package on your 2021 or newer Freightliner chassis motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. Includes all needed components and the convenient wireless Coachlink monitor.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
... Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Complete the factory prep package on your 2020 and newer Tiffin chassis motorhome so you can flattow your vehicle with the Air Force One supplemental braking system. Includes all needed components and the convenient wireless Coachlink monitor.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Features: Applies towed vehicle's brakes proportionally for smooth braking Measures motorhome's braking and activates car's brakes with same intensity Lets you adjust force and sensitivity for smooth braking Swaps easily between multiple towed vehicles Requires second vehicle kit (BRK2505 - sold separately) for each alternate car Adjusts to fit almost any car Sits evenly on any floorboard with adjustable feet Clamps easily around almost any brake pedal Braces firmly against the seat with seat pad that you can raise or lower Installs simply, with no splicing or hardwiring Plugs directly into 12V outlet in towed car Removes and stores easily Lightweight and compact Convenient handle - carry with one hand Allows you to control and monitor braking with handy LCD screen mounted on RV dashboard Lets you activate towed car's brakes in emergency or to correct sway Alerts you if the towed vehicle becomes detached from your motorhome Warns you if there's too much pressure to activate the brakes properly Plugs into 12V accessory outlet Stops the car if a breakaway occurs, even if your car's battery is dead Able to activate for up to 30 minutes after loss of power Made in the USA Specs: Compatible with hybrids and other cars with continuous-power-assist brakes Overall dimensions: 8" long x 7-1/2" wide x 11-1/2" tall Weight: 6 lbs 2-Year warranty Do I Need a Braking System for FlatTowing?
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. ... To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.To flattow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flattow braking system.
Use this kit to swap out the Demco Air Force One on your towed vehicle for a Stay-IN-Play Duo. Includes all the hardware and components you'll need.Features: Converts the setup in your towed car from the Demco Air Force One (SM99243) to the Stay-IN-Play Duo (SM99251) braking system Includes all of the hardware and components needed to complete the conversion If you are changing out your RV with air brakes for one with electric/electric-over-hydraulic brakes, this kit will get you what you need to convert your flattow setup.
This kit allows you to remove your existing Air Force One supplemental braking system and reinstall into a different towed vehicle.Features: Remove your Demco Air Force One braking system from one towed vehicle and reinstall into another towed vehicle Includes all installation components needed to transfer your system Made in the USA
Use this kit to swap out the Demco Stay-IN-Play Duo on your towed vehicle for an Air Force One. Includes all the hardware and components you'll need.Features: Converts the setup in your towed car from the Demco Stay-IN-Play Duo (SM99251) to the Air Force One (SM99243) Includes all of the hardware and components needed to complete the conversion on the vehicle and the RV If you are changing out your RV with electric/electric-over-hydraulic brakes for one with air brakes, this kit will get you what you need to convert your flattow setup.
Portable unit gets you smooth braking without a complex installation. Measures the RV's braking and applies your towed car's brakes with the same intensity, at the same time. Easy to swap between multiple cars. Includes LCD braking monitor.Do I Need a Braking System for FlatTowing? A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome.
Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Lasts 50 times longer Attaches with magnets Protective label keeps the magnets from scratching your car Works year-round Lens housing is sonically sealed and waterproof Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Meets DOT standards Specs: Universal fit for all vehicles Light diameter: 4-1/4" Overall dimensions: 3-7/8" long x 5-15/16" tall x 2-3/16" wide Tow light harness length: 245" Wiring length between lights: 63" Length of additional wiring harness for RV: 35" Diodes (per light): 6 Power draw at 12.8 volts Stop/turn signal light: 0.36 amps Tail light: 0.03 amps Lifetime warranty on LEDs Will These Magnetic Lights Work On My Vehicle?
Replace the air hoses of your Roadmaster InvisiBrake (RM-8700) or InvisiBrake second vehicle kit (RM-98700).Features: Replaces the air hoses for your Roadmaster InvisiBrake (RM-8700) or Invisibrake second vehicle kit (RM-98700)
If you want to flattow your vehicle with animated rear lights and have to use a battery bypass, use this kit to connect power and signal from your motorhome or tow rig. ... Features: Kit for animated tail lights is used in conjunction with other parts and systems required for a flattow set-up Allows you to bypass your battery during flattowing Lead can be wired in at the 6-way receiver to the plug from your motorhome or tow rig Can also be run off a lead from a battery charge line kit Quality wire, fittings, and a braided sleeve to protect the wiring and your vehicle Includes: 26' Wiring harness (6) 6-amp diodes Spade connectors, butt connector, ring terminal, and self-tapping screw Specs: Application: vehicles featuring progressive/animated lights that require the battery to be disconnected for flattowing - consult your owner's manual 1-Year warranty
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flattow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. ... Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wire adapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flattow brake system.
To use your Blue Ox Patriot, Patriot II, or Patriot 3 with more than one car, you will need to add this breakaway switch to the second towed vehicle. Also replaces a damaged or broken switch.Features: Adds a breakaway kit to a second towed vehicle or replaces a broken breakaway switch Works with Blue Ox Patriot (BRK2012), Patriot II (BRK2010 or BRK2016), Patriot 3 (BRK2019), and Patriot (BRK2022) supplemental braking systems Includes breakaway switch, breakaway cable, and wiring harness Made in the USA
Use your Roadmaster InvisiBrake supplemental braking system on a new towed vehicle with this kit. Allows the InvisiBrake to be used with 2 vehicles with additional components.Features: Transfers your InvisiBrake braking system to another vehicle Allows you to tow 2 vehicles using 1 InvisiBrake, with additional components Requires InvisiBrake air cylinder (RM-452109-10), InvisiBrake cable assembly (RM-452109), and 1/4" check valve (all sold separately) Fits Roadmaster InvisiBrake supplemental braking system (RM-8700) Includes: Pulley Cable anchor bracket Brake pedal clamp with mounting nuts and bolts Monitor wire patch cord Breakaway switch Vacuum check valves (3/8" and 1/2") Vacuum line tees (3/8" and 1/2") 4-Wire flat harness Limited lifetime warranty
Filters
