D Ring Adapter To Attach to 3/4 inch D-Ring with Blue Ox Tow Bar

Question

Question:

I have the 3/4 inch D rings, will these adapters work on blue ox tow bars?

asked by: Jim

0

Expert Reply:

Since you have 3/4 inch thick D-rings you need the part # BX88357 since you have a Blue Ox tow bar. If you had a Roadmaster tow bar instead you'd want the # RM-035.

expert reply by: Jameson C

0

Answer 1

If you didn't get an alignment when you got your new tires I would start there. The wondering issues could very easily be fixed by having the front end on your 2014 Fleetwood Bounder 35K aligned. If you have had an alignment done I would check to…

view full answer...

Answer 2

Thanks for that photo, and since you have a bumper with D-ring attachments, you would not need base plates; in fact, base plates wouldn't be able to be installed, so instead you would need a bumper adapter that attaches to the D-ring attachments.…

view full answer...

Answer 3

In order to use a tow bar with a set of welded-on d-rings which are commonly found on aftermarket Jeep bumpers you need a specific type of tow bar, one that mounts on the motorhome when not in use. The Roadmaster Falcon 2 Tow Bar part #RM-520 and…

view full answer...

Answer 4

Hey Randy, congrats on the new Bronco. You're definitely going to need to jump up to a heavy rated tow bar. Like you said the Roadmaster Falcon 2 item #RM-520 tops out at 6,000 lbs and your Bronco's already over that sitting there empty. I…

view full answer...

Answer 5

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…

view full answer...

Answer 6

I am really sorry about the delay in getting back to you! I sent all of this to our base plate manufacturers and currently they don't have a base plate that will fit your bumper but if you can get me the dimensions of the d-rings on your bumper I…

view full answer...

Answer 7

You're welcome! Thanks for all of the information! You could go with the Blue Ox item #BX1139 but I've got a different recommendation that will save you some money and get you a better setup. The Curt RVi battery charger is definitely the way…

view full answer...

Answer 8

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

view full answer...

D Ring Adapter To Attach to 3/4 inch D-Ring with Blue Ox Tow Bar

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching