Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.This will wind the gears at top speed, lifting or lowering your trailer in no time. Quick Tip: While your power drill is meant to make operation faster, the higher torque it creates may mean a reduced lift capacity. If you'd rather get more lift capacity out of the jack, we suggest sticking with the included hand crank instead.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.This will wind the gears at top speed, lifting or lowering your trailer in no time. Quick Tip: While your power drill is meant to make operation faster, the higher torque it creates may mean a reduced lift capacity. If you'd rather get more lift capacity out of the jack, we suggest sticking with the included hand crank instead.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.This will wind the gears at top speed, lifting or lowering your trailer in no time. Quick Tip: While your power drill is meant to make operation faster, the higher torque it creates may mean a reduced lift capacity. If you'd rather get more lift capacity out of the jack, we suggest sticking with the included hand crank instead.
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.The 3/4" socket for drilloperation is included too. A Wider Footprint on Soft Ground The round removable foot plate gives the jack a broader base when you're parked on gravel, grass, or other uneven surfaces.
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
Hey Tyler, yes the Trailer Valet JXC trailer jack part #TV94FR will work on a trailer that weighs 10,000 lbs. The weight capacity of this jack is 1.6k which is basically the tongue weight capacity for a trailer since that's what it lifts. A 10k…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…
Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
The trailer's loaded, sun's hot, and the crank feels heavy. Skip the shoulder workout. Grab your drill, drop the leg, and lift the trailer without breaking a sweat. When it's time to tow, the jack swings up and stays out of the way.Highlights Drill-Powered Operation: Raise and lower the jack using a standard cordless drill. One-Handed Drop Leg Adjustment: Quick-release handle drops the leg fast and cuts down how much you have to crank.
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Lift: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drilloperation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack with Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot
This JXC A-frame trailer jack features a manual hand crank, but can also be powered by any 18-volt to 24-volt compact drill when using the included attachment. Great for boat or cargo trailers. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment. Full Range Travel: Lift and drop leg combine for wide height adjustment on any terrain.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.One-Side Adjustment: Deploys both legs from one side to save time at camp. Manual Backup Included: Crank handle lets you operate it without a drill if needed. Tough Powder-Coated Finish: Wrinkle black coating helps protect against rust, chips, and grime. Features to Know About Powered Setup with the Drill You Already Own The last thing you want is to crank jacks or mess with wiring.
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Lift makes this jack ideal for multiple agricultural and commercial applications.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.The 3/4" socket for drilloperation is included too. A Wider Footprint on Soft Ground The round removable foot plate gives the jack a broader base when you're parked on gravel, grass, or other uneven surfaces.
Pull in, drop the jack, and adjust your height without slowing down. Use a drill for quick changes, then switch to the crank when you need full 14,000 lb lifting power. ... Reduce Flex Under Load: Square tube design adds strength where round jacks can twist. Spread Out the Tongue Weight: Larger footplate helps reduce sinking in loose dirt or mud. Features to know about Put the Drill You Already Carry to Work You already keep a drill in the truck because it saves time on everything else.
Pull in, drop the jack, and adjust your height without slowing down. Use a drill for quick changes, then switch to the crank when you need full 10,000 lb lifting power. ... Highlights Lift Heavy Trailer Tongues: 10,000-lb static capacity supports heavier trailer setups. Weld It On and Leave It There: Direct weld mount keeps the jack fixed to your trailer frame. Put Your Drill to Work: Use a standard 18 to 24V drill to raise and lower the jack with less cranking.
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Use the Included Drill Adapter: 3/4" drill adapter works with a non-impact drill for quick operation. Set the Leg for Better Support: Adjustable leg lets you set the proper height and angle.
Tired of cranking your stabilizers by hand? This double leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Use the Included Drill Adapter: 3/4" drill adapter works with a non-impact drill for quick operation. Set the Legs for Better Support: Adjustable legs let you set the proper height and angle.
Upgrade a heavy A-frame trailer from manual cranking with a self-contained 8K hydraulic jack. Its 12V double-acting pump, keyed pendant, 24" of lift, and drill-operated manual override give you powered operation with a backup for power loss.Self-Contained Double-Acting System: Integrated 12V pump powers extension and retraction without an external HPU. Manual Backup for Power Loss: 1/4" hex override lets you operate the pump with a standard drill if 12V power is lost. Keyed Pendant Control: Corded remote lets you operate the jack away from the pump and lock out the controls when finished.
Upgrade a heavy work or livestock trailer from manual cranking with a self-contained 10,000-lb hydraulic jack. The Vaquero carries its own power unit, gives you 26" of lift, and includes a manual override for backup operation.A 1/4" hex-bit drill or driver can operate the manual override to extend or retract the jack, so a dead battery doesn't automatically leave the trailer stuck in place.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while manual overrides give you a backup if the trailer loses power.Each jack also uses a 10" x 10" pivoting foot for a broad contact point on the ground. Independent Control with a Backup at Each Pump The wired control panel has separate extend and retract switches for the two jacks, letting you operate either side from one control point.
Upgrade a large livestock, equipment, or gooseneck trailer with two 10K hydraulic jack legs powered by one self-contained HPU. The tandem system gives you 20,000 lbs of combined lift capacity, 26" of lift, and two 12' connection hoses.Specs Capacity and Lift: Jack quantity: 2 Lift capacity: 10,000 lbs per jack 20,000 lbs combined Lift: 26" per jack Hydraulic System: Configuration: single-pump tandem system Lead jack: self-contained Vaquero with integrated HPU Follow leg: dependent Atlas hydraulic jack Power unit: SJP-320 Working pressure: 3,000 psi Operation: hydraulic extend and retract Manual override: built into SJP-320 power unit Manual extend and retract functions Operates with 1/4" hex-bit drill or driver Included Tandem Connection Kit: (2) 144" (12') high-pressure hydraulic hoses (2) 90-degree hydraulic adapters (1) Additional connection fitting Mounting: Mount style: bolt on Mounting bracket: 7" wide x 20" tall Vertical hole spacing: approximately 2" on center Construction: Glide bearings help prevent tube-to-tube wear Warranty: 2-year limited warranty
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.It is recommended that 2 people operate the jacks simultaneously to make it easier to raise each side of the camper evenly. However, 1 person can do the job by alternately cranking each jack in small increments.
Filters
