Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup
Trailer Hub Grease Seals Two 10-36 Seals per Package Double Lip Seal For single lip seal see # 42385 I.D. O.D. Use With: 2.250 3.376 E-Z Lube End Units Seal Cross-Reference Dexter # Transcom #
Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.Features: Fits 2-3/8" axle Allows moving trailer leaf springs to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Includes: (2) Spring Seat (8) Nut
(2) Double-lipped grease seals I.D. O.D. Use With: 2.125 3.376 E-Z Lube and Oil 5,200, 6,000 and 7,000 LB Axles Seal Cross-Reference Dexter # Transcom # National # NOK # Chicago Rawhide # 010-010-00
Replacement grease seals. Double-lip design helps keep water out and grease in. diameter: 2.565" Quantity: (2) 10-19 grease seals Inner Diameter Outer Diameter Applications 1.719" 2.565" 3,500-lb Axles Seal Cross Reference Dexter Transcom National NOK Chicago Rawhide
Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…
Appreciate that information, and the 410980-02 axle is a Dexter #10 axle, so for the tandem axles on your 2016 Airstream International, the correct lift kit is the following: - Torflex Lift Kit - Tandem Axle #K71-707-02 The #K71-707-02 will give your…
You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
Due to shipping size and weight restrictions we cannot ship axles over 89-inches overall length. You'll need to source your beam axle from a local trailer supply shop who can order one for you with the required length, spring seat dimensions and…
I recommend an axle-less system for your trailer. The axle-less systems can be mounted to the trailer frame. This means you do not need the springs and hangers and you aren't restricted by the width of the trailer frame. If you need electric…
I really like the Firestone airbags because they use a crimp rolled design which is much more durable than the band clamp used with the Air Lift Kit item #AL88299 you were looking at. For your 2016 Toyota Tundra, I recommend the Firestone Ride-Rite…
I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…
One of the biggest differences between the 6-leaf 5,000 lb trailer axle leaf spring part #UG34FR and the 4-leaf part #e44SR is the length. The 6-leaf setup is 30 inches long and the 4-leaf setup is 25-1/4 inches long. In general though the number of…
The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
First, I would say if there is any question on the road worthiness of the trailer, take the steps to correct it. Better safe than sorry. Some trailers have wheels that are hub-centric, the wheel is centered on the hub using the center pilot holes.…
I am pretty sure that the axle you are in need of is a 7k axle that has 95 inches from hub face to hub face and 80 inches from spring seat center to spring seat center which we do have a replacement for with the part #8327834. I would recommend you…
What brand and model is the brake controller? The Rams changed quite a bit in 2015 so a new harness would be needed. But if you can get me the controller you have I can help pick you out what you'd need.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... entire assembly. DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels. bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing. Built-in grease zerks for easy lubrication ... impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Wet bolts secure equalizers and springs to the hangers on your trailer
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels. bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease ... 6,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight
Round trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it ... taking apart the entire assembly. DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the
Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... . After you've put on the grease caps and lug nuts (included), you'll be ready to roll. etrailer Axles etrailer axles are made of high-strength steel and come with spindles and spring seats welded
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 4,400-lb E-Z Lube axles. Inner bearing (L68149) and race, outer bearing (LM67048) and race, grease seal ... most manufacturers, including Dexter and Lippert (LCI) Does not work with AL-KO 4,400-lb axles Actual drum dimensions: 10-15/16" diameter x 2-5/8" wide Works with 10" brake assembly Bolt
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... taking apart the entire assembly. DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the
Moves your trailer's leaf springs to the top of your axle. Works with 3" diameter axles and double-eye leaf springs only.Features: Allows moving leaf trailer springs to top of axle For use with double-eye springs only Fits 3" axle Sleeve bolts allow the setup to install level Includes: (2) Spring Seats (8
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" ... USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease ... , races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 3,500-lb trailer axles with #84 spindles Drum dimensions: 10" diameter x
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal ... are included Hub and drum are made in the USA Specs: Application: 5,200-lb E-Z Lube trailer axles with #42 agricultural spindles Drum dimensions: 12" diameter x 2" wide Works with 12"
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... entire assembly. DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold
Hub fits 9,000-lb to 10,000-lb general-duty Dexteraxles made prior to July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil seal, cap, wheel bolts, and lug nuts included. Oil ... Features: Trailer hub assembly fits idler axles Oil bath lets you check lubricant level without disassembling the hub Look through clear oil cap to check lubrication Bearings, races, oil seal, oil
Filters
