etrailer And Dexter 7-Leaf Double-Eye Spring Comparison Video

Hello Steve, thanks for reaching out. In my honest opinion, leaf springs are leaf springs. There is not going to be a noticeable difference in quality or longevity between the different brands. As long as the length of the spring is correct and the…

Is your axle an 8k axle or is it a 4k? If it is an 8k axle then you would want a spring like the part #e89FV but you would have to move in your current hangers. Did you measure your springs with the trailer's weight on the suspension or without?…

First off by moving to heavier leaf springs you will cause the trailer to want to bounce more which could cause another set of issues. To ensure the length of the springs are correct I can use the information off the axle tag located on the center of…

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

Blane, what you're looking for is the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles #DX74XR. This spring has a 4k capacity, will work with 8k axles, has 1 3/4" wide leaves. You'll notice that these springs are a bit shorter, but…

Hey Michael, the leaf spring part #e66SR that you referenced would not work for you as it was designed for a much lighter 2,500 lb axle. So instead you'd want a leaf spring that was designed for 7k axles like the part #TRU52FR which is similar in…

Hello Matt, I can help you determine the right replacement double-eye leaf springs for your 2024 Brinkley Z2900, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure…

Hey Thomas, well I know exactly what you are talking about and the correct replacement spring you would want is the EMCO part #TRU52FR which is 25-1/4 inches long and is for a 7k rated axle. Did you break yours or did they wear out?

Hey Richard! I went out to the warehouse and measured the leaf stack on the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long item #EM28AJ. It measures 2-1/2" tall. If you have any additional questions feel free to throw…

Hey William, the leaf spring part #e94SR is for a 6k rated axle which has a 3 inch diameter so for a u-bolt kit you'd want the part #SP01-060. If your current u-bolts are in good shape though you can just reuse them.

Hello Pat, The 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" #e89FV are our own product, so we're the manufacturer and they are made in China. The Dexter 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long…

Hey Zach. What suspension components are you needing? There's no database that will allow me to look up part numbers for what's on your 2010 Keystone Raptor so you'll need to find some part numbers off of yours or take some measurements.…