You're wiring up the trailer and want it done right the first time. This 4-way flat connector has pre-stripped, color-coded wires and extra length to reach where you need. Splice it in, test the lights, and you're ready to tow.Features to know about 4-Way Replacement with Extra Reach This pre-wired 4-flat connector makes it easy to upgrade or replace your trailer plug. The color-coded wires match standard functions, and the 60" jacketed harness gives you the length you need to route and protect the wiring along the frame.
Your trailer needs a 4-way, but your vehicle runs separate turn and brake signals. You wire it up anyway and the lights don't work. This converter fixes it. It handles the signal translation, so your trailer lights work every time.It combines the signals internally and sends them through a single plug. The color-coded wires simplify installation, and the 12" lead gives you room to make clean connections. Great for small trailers or utility setups.
... Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
... Designed for vehicles that have amber turn signals and incandescent bulbs. Includes wire taps and color-coded wires.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Designed with safety in mind Guards against electrical shorts and mis-wire situations Connects directly to your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded to ease installation Resists shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes a durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 3-wire electrical systems and incandescent tail lights 4-Way harness length: 76" Ground wire length: 16" Splice-in wire length: Brown, red, yellow: 16" Green: 60" Max amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 5 amps per circuit 1-Year limited warranty Do I Need a Tail Light Converter?
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with included quick-splice connectors Bonded wires are color coded (see wire configuration below) Includes durable, molded-rubber, standard female output socket Specs: Harness length: 60" Max amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
Welcome back Michael and congrats on your new Jeep! To flat tow your 2025 Jeep Wrangler Sahara with a Blue Ox tow bar you'll need the Blue Ox baseplate kit item #BX1139. This baseplate is compatible with the stock Sahara bumper. To transfer over…
Congrats on the new trailer Greg! For your 2026 ATC ROM 450, I recommend the Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump item #FR87TQ in black or item #FR77TQ in white. These are complete AC systems that include a built in heat…
Hey Nick, welcome back! There is a foam divider that is included with the Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump item #FR77TQ. We've had customers trim this to accommodate a thinner roof. Furrion does not make a…
Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…
Hey Dan! All of the GE systems, including the GE Appliances HE Low-Profile #GE33ZR, are fixed speed. The only major manufacturer taking advantage of the new R32 refrigerant with a variable speed compressor is Furrion with the Chill Cube. The Chill…
Hey Tim, thank you so much for the measurements! The next size up in a 25-1/4" leaf spring with four leafs is our Double-Eye Spring for 5,000 lbs Trailer Axles item #e44SR. This leaf spring has a 2,500 lbs capacity so it'll definitely give…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Hey Ryan! It's a little hard to explain where the control box for the GE Distribution Box part #GE73ZR goes. If you search online for "GE RVAC - Installing the RARED1A interior RV air conditioner" a video by GE will pop up and it will…
Hey David, we don't have a way to get just the o-rings from the Camco caps so you would need to order a new cap with the part #CAM39452. How long did your o-ring last?
Just the finish Jordan. Specs wise they're identical. The GE Profile RV Refrigerator w/ Freezer item #GE68FR has a glass stainless steel appearance which is glossy and reflective. The GE Profile RV Refrigerator w/ Freezer item #GE78FR has the…
Hey Craig! We don't have an axle that is going to match those dimensions. There isn't a kit that'll convert your trailer to a tandem axle either. To add a second axle to your trailer, apart from the axle you'll need a set of hangers…
Hey Mary. The Furrion Chill HE RV Air Conditioner System item #FR65TD is a single zone system so it's going to have everything you need to get it installed and running. However, the system is going to be isolated from your other AC. The Furrion…
You're replacing the wiring on a trailer with surge brakes and want everything to work right the first time. This 5-wire flat set gives you the reverse lockout and all the lighting functions. Splice it in, match the wires, and you are good to go.Highlights 5-Wire Flat Connector Set: Includes both trailer and vehicle ends. 12" Trailer Lead: Short length for easy connection at the trailer end. 48" Vehicle Harness: Provides ample length for vehicle-side wiring. Color-Coded Wires: Simplifies installation with standard wire colors. Weather-Resistant Housing: Helps protect against moisture and road grime.
You're halfway through loading the trailer when your buddy shouts the lights aren't working. You check the plug. Wrong connector. No time to troubleshoot. You grab the harness, plug it in, and just like that, everything lights up.Pre-Wired Leads: 12" trailer end and 48" vehicle end for flexible routing. Color-Coded Wires: Simplifies installation with standard wiring colors. Weather-Resistant Housing: Helps protect against moisture and road grime.
... Metal socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color coded to RVI standards.Features: Standard, 7-pole, RV-style socket connects tow vehicle to trailer Heavily plated metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded cover with stainless steel spring Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge At its widest point, the diameter of the round portion 1-7/8" Mounting holes are 1-1/2" from center to center vertically and 2-3/16" from center to center horizontally 1-Year limited warranty 12-703 Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End Replaces 30310
... Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
Your trailer needs a 5-flat, but the vehicle runs separate turn and brake signals. This converter fixes it. It combines the signals, adds the reverse circuit, and gets your trailer lights working the way they should.Built-In Converter Box: Manages signal logic from vehicle to trailer. Color-Coded Leads: Makes installation easier with standard wire colors. Weather-Resistant Housing: Helps protect against moisture and road grime.
You're upgrading your tow package or fixing bad wiring at the bumper. This 7-way comes pre-wired with blunt-cut leads so you can tie straight into your system. One part gets it done and gets you towing again.Highlights 7-Way Blade Socket: Standard vehicle-end plug for trailer lights, brakes, and 12V power. Pre-Wired Leads: Color-coded blunt-cut wires for easy hookup. Mounts to Bumper or Bracket: Fixed connection point at the rear of the vehicle. Spring-Loaded Cover: Helps keep terminals protected when not in use.
You're fixing a short lead at the bumper. This 12 inch vehicle-end 4 Flat uses color coded bonded wire, and the included splices help you connect quickly so stop, turn, taillight, and ground are ready.Highlights 12 Inch Lead: Short length for clean routing. Vehicle-End 4 Flat: Standard vehicle-side connector. Color Coded Bonded Wire: Quick identification during install. Core Signals: Stop, turn, taillight, and ground supported. Includes 3 Splices: Make connections without extra parts.
You're sorting out a trailer light issue and don't want to rip everything apart. This loop lets you test wiring fast. Plug it in, check the LEDs, and see what's working. Saves time and frustration.Specs Connector Type: Type: 4-way flat loop Cable Length: Total loop: 12" long Functionality: LEDs show: left turn, right turn, tail/running lights, and brake signal Construction: Material: plastic connector housing Wiring: color-coded leads Warranty: 1-Year limited
You're replacing a worn pigtail before a tow. This 48 inch vehicle-end 4 Flat gives you a clean, color coded lead so stop, turn, taillight, and ground are ready when you hook up.Highlights 48 Inch Lead: Extra length for clean routing. Vehicle-End 4 Flat: Standard vehicle-side connector. Color Coded: Quick wire identification during install. Core Signals: Stop, turn, taillight, and ground supported. Bonded Wire: 16/18 gauge bundle stays organized.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
1-11/16" Round. Waterproof trailer light serves as either a side marker or clearance light. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. Surface mount. 2-Wire pigtail with 0.18 male bullets. P2 rated.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Get the best towing experience with this kit. 2-5/16" Hitch ball absorbs shock. Wireless brake controller applies your trailer's brakes proportionately. Friction sway control helps keep your trailer in line. And hitch pin limits rattle.The Echo Smart Control app is free to download and use. Scan the QR code included with the Curt Echo or search Echo Smart Control in the Apple App Store or Google Play Store. The app has the ability to sync up to 5 Echo devices, and the memory function allows you to save unlimited vehicle-trailer profiles.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts and mis-wire situations Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 2-wire or 3-wire electrical systems 4-Way harness length: 60" Splice-in wire length: Brown, red, yellow: 18" Green: 36" Ground wire length: 18" Power wire length: 12' Maximum amperage: Turn lights and brake lights: 4.2 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Do I Need A Tail Light Converter?
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Color coded wires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 40' Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002295
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Color coded wires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 25' Wire gauge (all): 20 Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002275
Filters
