Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When a reflector goes missing or cracks, you don’t want to search for something that “might fit.” This 3-3/16" long x 1-7/16" wide Optronics amber reflector is an exact match for several common models—Wesbar # 3354, Truck Lite # 98003Y3, and Peterson # B483A. That means it fits right where the old one was without trimming or drilling. Just peel, stick, and you’re back to full visibility and compliance in minutes.

Skip the drilling and screwdrivers. The self-adhesive backing makes installation easy—just clean the surface and press it on. The strong adhesive holds tight to smooth surfaces, so you can add reflectors wherever extra visibility is needed. It’s a quick DIY upgrade that looks clean and professional once mounted.
Built from tough acrylic, this reflector handles exposure to weather and road grime without fading or cracking. Whether it’s sun, rain, or rough roads, the durable material keeps its bright amber color shining through. You won’t have to worry about it peeling or wearing out after a few trips.
Visibility isn’t just about safety—it’s required by law. This amber reflector meets FMVSS reflex reflector standards and is DOT compliant, so it checks the boxes for street use. Even in low light, that bright amber reflection makes you easier to see from any angle, keeping your trailer or rig compliant and clearly marked.
You can count on it to last the long haul. With a 3-year warranty from Optronics, this reflector gives you peace of mind that it’ll stay secure and shining trip after trip. Once it’s on, you can forget about it and focus on the road ahead.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, Ryan here at etrailer. Today we're going to be checking out the Optronics Stick-on Trailer Reflector. These stick-on reflectors are going to be a great solution for those of you that might already have an existing one that's broken. So, you can use it as a replacement. Or if you're just wanting a little bit of extra visibility on your trailer, but don't feel like running a light up there. Or just really not able to.
It doesn't really make sense to use a light there. So, perfect example in our case here. Where our crank is and our upright to secure the boat down. Super thick steel, doesn't really make a whole lot of sense to mount a light here. So, that's where the reflector can come into play.
Sticks right on and you get that little bit of extra visibility. The way these will attach, is on the back of them, they come with two-sided sticky tape. And it's actually pretty good quality as long as your surface is good and clean and dry. You know these are going to have no issues holding on for a long time. Being that they're amber in color though, this orange, you want to mount these in the front of the trailer, on the sides.
If you're going to be doing anything on the back, you'd want the red ones, which they are available. So just keep that in mind. And to make sure this will work with your application, if you got enough space, whatever the case may be. As far as the length of it here, it's going to be 3 and 3/16". And how tall it is, it's going to be 1 and 7/16".
So, these are commonly referred to 3 by 1 and 1/2" reflectors. Just to kind of compare it to another one. Here's another stick on type one. Essentially, you know accomplishes the same thing, just a little bit better, or a little bit different design rather. A little different shape. These ones feel a lot thicker. So if it we're me and I was putting this in kind of a high impact area, let's say by the wheel, by the wheels, or something like that. These might be able to take, you know, a beating a little bit better. But these being a little bit thinner. But up here, out of the way, you know, you really shouldn't run into any issues or damage or anything like that. These are going to be DOT compliant, so you're covered there. And they're sold individually so pick up as many as you need. You know, generally speaking, you do one on each side of your trailer, however you want to set it up. And usually it seems like when a lot of people are adding these on or putting new ones on, kind of overhauling the trailer anyway. So, if that's your case and you plan on, you know, upgrading your lights and all those other types of ins and outs, we carry all that stuff. So be sure to check that out. But I think that'll about do it for our look at of the Optronics Stick-on Trailer Reflector.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews

Bruce
3/13/2021
Reflectors after a year are still as new,great product

Tkw
10/22/2021
Perfect with no issues at all. Will always use etrailer.

Dean
7/10/2020
Great, my new tail lights are much brighter than the old incandescent lights. Install was quick and easy.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Cole P.
12/12/2014
Thank you Patrick, these products are still working great!