Tired of balancing your kayak on a cooler and a lawn chair to work on it? These padded stands lift your boat to a better height, protect the hull, and fold flat when you're done. Now you can stop worrying about your yak falling off of a DIY rig.Supports Up to 350 Pounds: Heavy-duty frame handles big boats without flexing, bowing, or breaking a sweat. Fits Recreational, Touring Kayaks, and More: At 72" long, it's made for full-sized hulls that don't fit flimsy racks.
This carrier with built-in lift assist takes the strain out of loading a kayak onto your roof rack. Arms with gas struts let you load and tie down kayak at waist level, then easily lift it onto your roof. Tie-downs included. Mounts to most crossbars.The Hullavator Pro gives your back and shoulders some relief as it helps you lift your boat onto your vehicle's roof rack. And you won't need to stand on your running boards or a step stool to position and tie down your boat.
These J-style cradles let you transport 1 or 2 kayaks on your roof rack. Integrated ramps help you to load a kayak from the side of your vehicle. Padded arms fold down when not in use. Clamp to most crossbars without tools. 4 Tie-downs included.The space-saving design holds your boats on their sides to free up roof rack space, and built-in ramps make it easy to load from the side of your vehicle. The lightweight, rust-resistant aluminum rack includes tie-downs for securing 1 kayak.
This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof rack. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.Features: Carrier lets you transport 1 canoe or kayak or 2 stand-up paddleboards on your roof Can also be used for 3 short surfboards, 2 windsurf boards, or 2 long surfboards Easy to load with integrated straps Set boat on crossbars Wrap long straps over the boat and connect them with hooks to wire looms on short straps Tighten straps down with built-in ratcheting knobs High-density foam pads help to protect cargo during transport Wrap around crossbars and fasten with Velcro closures Adjustable pads and rubber coating on straps protect boats from scratches and scuffs Locking covers secure boat to carrier and carrier to crossbars Easy, clamp-on installation with included hardware Constructed of durable metal and rubber Specs: Application: round, square, aero, elliptical, and most factory crossbars Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall Long bolt kit (INISF722 - sold separately) lets you mount rack on crossbars up to 2" tall Minimum crossbar spread: 24" Carrying capacity: 1 canoe or kayak; 2 stand-up paddleboards; 3 shortboards; 2 windsurf boards; or 2 longboards Board pad width: 20" Carrier weight: 13 lbs Limited lifetime warranty This locking carrier lets you safely and securely transport 1 kayak or canoe, 2 stand-up paddleboards, or 2-3 surfboards on your vehicle's roof rack.
These clamp-on saddles make it easy to carry a kayak on your roof rack. Rollers on the rear cradles allow simple, one-person loading from the back of your car. Tilting, molded saddles grip your hull for safe, stable transport. ... This rack is great for transporting a sea (touring), river (whitewater), or recreational (fishing) kayak. This system includes 4 saddles with spring-loaded, pivoting heads that adjust to the shape of your boat as you load it.
This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Mounts with included hardware into T-slots in tops of crossbars.Features: Carrier lets you transport 1 canoe or kayak or 2 stand-up paddleboards on your roof rack Can also be used for 3 short surfboards, 2 windsurf boards, or 2 long surfboards Easy to load with integrated straps Set boat on crossbars Wrap long straps over the boat and connect them with hooks to wire looms on short straps Tighten straps down with built-in ratcheting knobs Adjustable pads and rubber coating on straps protect boat from scratches and scuffs Locking covers secure boat to carrier and carrier to crossbars Simple installation in the T-slots of Inno Aero crossbars Just slide bolts into T-slots and attach rack to bolts Board pads (INA771 - sold separately) help to protect cargo during transport Constructed of durable metal and rubber Specs: Application: Inno Aero crossbars and most crossbars with T-slots Minimum crossbar spread: 24" Carrying capacity: 1 canoe or kayak; 2 stand-up paddleboards; 2 windsurf boards; 2 longboards; or 3 shortboards Carrier weight: 12.5 lbs Limited lifetime warranty This locking carrier lets you safely and securely transport 1 kayak or canoe, 2 stand-up paddleboards, or 2-3 surfboards on your vehicle's roof rack.
Yes, it is possible. To add a roof rack to your 2022 Toyota C-HR, without rails that does not overhang, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum -…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Expandable watersport carrier holds 1 surfski or 1 narrow ocean kayak with rubber-coated, ratcheting arms and an adjustable base - no need for load straps. Integrated locks secure your boat to the carrier. Includes top channel mounting hardware.You don't have to own several carriers, changing them out each time you want to take a different boat to the water. The carrier can expand or contract depending on the size of your boat. There are 4 holes in the middle expansion piece for the t-bolts once you've adjusted the carrier to your desired width.
Expandable watersport carrier holds 1 surfski or 1 narrow ocean kayak with rubber-coated, ratcheting arms and an adjustable base - no need for load straps. Integrated locks secure your boat to the carrier. Includes crossbar mounting hardware.You don't have to own several carriers, changing them out each time you want to take a different boat to the water. The carrier can expand or contract depending on the size of your boat. There are 4 holes in the middle expansion piece for the t-bolts once you've adjusted the carrier to your desired width.
This easy-to-load, J-style carrier lets you haul your kayak on your roof rack crossbars. The space-saving cradles are padded to protect the hull, and the universal mounting hardware attaches to most crossbars. ... This helps prevent the boat from shifting forward or backward during transport. Tool-Free Installation The Contour mounts to most roof rack crossbars without the need for tools.
Holds an SUP and a kayak flat, stacked with space between - off the floor and easy to reach. The padded arms prevent hull damage, and there's no awkward shuffle to pull out the one you actually want to use. Great for a garage, dock, or by a shed.Designed for Kayaks and SUPs This rack was built for kayaks and SUPs, giving each boat its own padded cradle with room to breathe. You could hang a wetsuit or lifejacket on it, but its better served keeping watercraft supported, spaced, and ready for the next launch.
This J-style carrier handles your usual solo kayak trips, then converts to a vertical stacker when a second paddler joins. StrapCatch keeps straps within reach while loading, and the carrier folds down between trips for a lower roof profile.The Hull-A-Port XTR holds your kayak in a J-cradle for single-boat trips, then repositions into a vertical stacker when another paddler comes along. It supports one kayak up to 75 lbs or two kayaks with a combined weight up to 130 lbs, giving your roof setup a practical way to adapt when the number of boats changes.
This post-style mount carries 2 kayaks on edge, securing to your roof-rack crossbars and folding flat when not in use. Reinforced steel construction and padding on the post protect your boat, and included straps secure boats safely to the rack.Features: Universal carrier holds up to 2 kayaks on edge Post-style mount attaches to roof-rack crossbars Ultimate roof clearance with arms that fold down Improved strap management with AnchorHead tie-down feature Protective HullGuard padding on arms keeps your boat looking brand new Locks with 2 Same Key System (SKS) Cores (sold separately) SKS Cores can be changed out to make all your Yakima locks keyed alike Heavy Duty Straps with padded cam buckles secure boats to post Tightening strap gives you complete control over grip Padded buckles protect your boat and vehicle from scratches 2 Tie-down straps with cam buckles secure 2 kayaks to the carrier 2 Additional tie-down straps (Y05006 - sold separately) required to secure 3 or 4 kayaks 2 Bow/stern tie-downs with cam buckles secure 2 kayaks to your vehicle Hood anchors (Y07416 - sold separately) may be required if your vehicle doesn't have built-in tie-down points 2 Additional bow/stern tie-downs (Y05006 - sold separately) required to secure 3 or 4 kayaks Specs: Application: round, square, aero and most factory crossbars Capacity: up to 2 kayaks, depending on vehicle limitations Requires cinch straps (Y05006) to carry up to 4 kayaks Minimum crossbar spread: 24" Crossbar length for 4 kayaks must be a minimum of 66" Weight: 7.8 lbs Dimensions: 22" tall x 6" long x 5" wide Lifetime limited warranty
... Padded cradles hold the upper kayak, while cam buckle straps hold the second boat, below. Mounting Hardware included.Features: Kayak rack lets you store 2 kayaks on the wall of your garage, boathouse, or shed Also great for canoes and roof cargo boxes Padded cradles hold the upper boat Cam buckle straps attach to cradles to hold the lower boat Easy installation with included mounting hardware Durable steel construction with red powder coat finish is rust resistant Perfect for indoor or outdoor use Specs: Weight capacity: 100 lbs per boat Cradle dimensions (each): 16" long x 5" wide x 10" tall Strap length: 12' Limited lifetime warranty
This post-style kayak carrier is an economical way to transport 2 kayaks on your roof rack, and it can be expanded to carry 4. Foam blocks protect your kayaks and crossbars from scratches. Includes load straps, tie-downs, and mounting hardware.Features: Folding, post-style carrier lets you transport 2 kayaks on your roof rack Add foam blocks and tie-down straps (both sold separately) to transport 2 more kayaks Upright posts stabilize kayaks during transport and fold for overhead clearance when not in use Foam blocks protect your kayaks and crossbars from scratches and scuffs Tie-down straps and bow/stern tie-downs secure your kayak to your roof rack and to your vehicle Anchor kit (sold separately) creates temporary mounting points for bow/stern tie-downs Quick and easy clamp on installation on most crossbars - no tools required Aluminum posts are corrosion resistant Made in the USA Specs: Application: round, square, aero, elliptical, and most factory crossbars Carrying capacity: 2 kayaks 4 kayaks with added foam blocks and straps (sold separately) Maximum boat width: 32" Weight capacity: 50 lbs per boat Dimensions: Posts (each): 4-1/4" wide x 20" tall Foam blocks (each): 8" long x 4" width x 3-3/8" tall Strap length (each): Load straps:11' Bow/stern tie-downs: 10' Carrier weight: 8.5 lbs Limited lifetime warranty Folding Upright Posts with Foam Blocks The Stax Pro2 is one of the most economical ways to transport 2 kayaks on your roof rack.
Stores two kayaks flat, stacked with space between - off the floor and easy to reach. The padded arms prevent hull damage, and there's no awkward shuffle to pull out the one you actually want to use. Great for a garage, dock, or by the shed.Features to know about No Ceiling Hoist Needed This rack keeps your kayaks off the floor and out of the way, without forcing it overhead. No need to wrangle pulley straps or dangle 60 pounds of boat from drywall anchors.
Adjustable width watersport carrier holds 1 kayak, 1 canoe, or up to 2 SUPs with rubber-coated, ratcheting arms - no need for load straps. Integrated locks secure your boat or boards to the rack. Includes clamp-on and top channel mounting hardware.Built-In Security LockRack carriers have security built-in with locks in the base of the carrier, securing the ratcheting arms. Once you've locked your boards or boat in the carrier by pushing the arms tight against your watercraft, the arms will stay locked until you remove them with a key. This carrier comes with 4 identical keys.
Store 3 kayaks or canoes in your garage, shed, or boathouse with this free-standing rack. Padded cradles and foam blocks protect your boats from scratches and scuffs. Cradles can be placed anywhere on the rack to accommodate different boat sizes.Features: Free-standing storage rack holds 3 kayaks or canoes Perfect for use in your garage, shed, or boathouse Padded cradles and foam blocks protect your boats from scratches and scuffs Cradles can be placed anywhere on the rack to accommodate different boat sizes Adjustable feet keep frame stable and level Durable steel construction with powder coat finish is rust resistant Specs: Total weight capacity: 250 lbs Kayak cradles: 125 lbs Foam blocks: 100 lbs Overall dimensions: 37" long x 48" wide x 83" tall Kayak cradle dimensions (each): 20-1/2" long x 1-1/4" wide x 7-1/2" tall Foam block dimensions (each): 12" long x 4" wide x 4" tall Weight: 67 lbs Limited lifetime warranty Foam blocks: 1-Year limited warranty
Store 6 kayaks or canoes in your garage, shed, or boathouse with this free-standing rack. Padded cradles and foam blocks protect your boats from scratches and scuffs. Cradles can be placed anywhere on the rack to accommodate different boat sizes.Features: Free-standing storage rack holds 6 kayaks or canoes Perfect for use in your garage, shed, or boathouse Padded cradles and foam blocks protect your boats from scratches and scuffs Cradles can be placed anywhere on the rack to accommodate different boat sizes Adjustable feet keep frame stable and level Durable steel construction with powder coat finish is rust resistant Specs: Total weight capacity: 500 lbs Kayak cradles: 125 lbs Foam blocks: 100 lbs Overall dimensions: 48" long x 48" wide x 83" tall Kayak cradle dimensions (each): 20-1/2" long x 1-1/4" wide x 7-1/2" tall Foam block dimensions (each): 12" long x 4" wide x 4" tall Weight: 86 lbs Limited lifetime warranty Foam blocks: 1-Year limited warranty
... Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load a boat.We know the struggle is real, so we recommend the MOS Uplift kayak lift assist for your roof rack. This innovative gadget lets you load your boat without having to climb onto your running board or use a step stool - simply pull a handle to lower the arms to a much more manageable height.
This saddle-style kayak carrier is reinforced to let you transport 1 fishing kayak on your roof rack. Rear-loading design lets you push kayak onto the cradles from the back of your vehicle. Includes load straps, tie-downs, and mounting hardware.Features: Saddle-style carrier lets you transport 1 sit-on-top, fishing kayak on your roof rack Also great for carrying standard kayaks Rear-loading design makes it easy to push large kayaks onto carrier from the back of your vehicle Load assist (sold separately) reduces strain from lifting the boat onto your roof Rubber padded cradles hold your kayak on its hull, protecting it from scratches and scuffs Tie-down straps and bow/stern tie-downs secure your kayak to your roof rack and to your vehicle Anchor kit (sold separately) creates temporary mounting points for bow/stern tie-downs Quick and easy clamp on installation on most crossbars - no tools required Specs: Application: round, square, aero, elliptical, and most factory crossbars Carrier capacity: 1 kayak Weight capacity: 150 lbs Dimensions: 27-1/2" long x 6" wide x 4-1/2" tall Strap length (each): Load straps: 15' Bow/stern tie-downs: 11' Carrier weight: 12.2 lbs Limited lifetime warranty Rear-Loading, Saddle-Style Carrier The rear-loading, saddle-style carrier lets you transport 1 sit-on-top, fishing kayak, hull side down.
This saddle-style kayak carrier with lift assist lets you easily load and transport 1 kayak on your roof rack. The slide-out lift assist lets you push the kayak onto the carrier without lifting the boat over your head.To load a kayak onto the carrier, simply slide the lift assist out from under the rear cradle and set your kayak's bow on the raised platforms. Then, raise the boat's stern to your chest and push the kayak over the lift assist and onto the carrier. Once the kayak is positioned where you want it, slide the lift assist back under the rear cradle.
Adjustable XL watersport carrier holds 1 kayak, 1 canoe, or 2 SUPs with rubber-coated, ratcheting arms - no need for load straps. Integrated locks secure your watercraft to the carrier. Includes clamp-on and top channel mounting hardware.Built-In Security LockRack carriers have security built-in with locks in the base of the carrier, securing the ratcheting arms. Once you've locked your boards or boat in the carrier by pushing the arms tight against your watercraft, the arms will stay locked until you remove them with a key. This carrier comes with 4 identical keys.
This saddle-style kayak carrier lets you transport 1 kayak on your roof rack. Rear-loading design lets you push kayak onto the cradles from the back of your vehicle. Includes load straps, tie-downs, and mounting hardware.Features: Saddle-style carrier lets you transport 1 kayak on your roof rack Rear-loading design makes it easy to push large kayaks onto carrier from the back of your vehicle Load assist (sold separately) reduces the strain of lifting the boat onto your roof Rubber padded cradles hold your kayak on its hull, protecting it from scratches and scuffs Tie-down straps and bow/stern tie-downs secure your kayak to your roof rack and to your vehicle Anchor kit (sold separately) creates temporary mounting points for bow/stern tie-downs Quick and easy clamp on installation on most crossbars - no tools required Specs: Application: round, square, aero, elliptical, and most factory crossbars Carrier capacity: 1 kayak Weight Capacity: 75 lbs Dimensions: 27-1/2" long x 6" wide x 4-1/2" tall Strap length (each): 11' Carrier weight: 11.6 lbs Limited lifetime warranty Rear-Loading, Saddle-Style Carrier This rear-loading, saddle-style carrier lets you transport 1 kayak, hull side down.
Store 2 kayaks, 2 SUPs, and 6 skis in your garage or boathouse with this free-standing rack. Padded arms and foam blocks protect your gear from scratches and scuffs. Cradles can be placed anywhere on the rack to accommodate different boat sizes.Features: Free-standing storage rack holds 2 kayaks, 2 SUPs, and 6 skis Perfect for use in your garage, shed, or boathouse Soft padding and foam blocks protect your boats and skis from scratches and scuffs Cradles and arms can be placed anywhere on the rack to accommodate different boat sizes Ski hangers provide adjustable spacing for skis, behind the rack Adjustable feet keep frame stable and level Durable steel construction with powder coat finish is rust resistant Specs: Total weight capacity: 250 lbs Kayak cradles: 125 lbs SUP holders: 125 lbs Foam blocks: 100 lbs Ski hanger: 100 lbs Rack dimensions: 37" long x 48" wide x 83" tall Kayak cradle dimensions (each): 20-1/2" long x 1-1/4" wide x 7-1/2" tall SUP holder dimensions (each): 27-1/2" long x 1-1/2" wide x 7-1/2" tall Foam block dimensions (each): 12" long x 4" wide x 4" tall Ski hanger dimensions: 7-1/4" long x 49" wide x 1" tall Weight: 67 lbs Limited lifetime warranty Foam blocks: 1-Year limited warranty
Filters
