Video Transcript for An In-Depth Look at the Replacement Packing Seal Kit for Meyer Snow Plow Ram Cylinder

Today we're gonna take a look at the replacement seal kit for cylinders on Meyers snow plow with a one and a half inch ram cylinder. Now this is going to be our replacement seal kit for your cylinder. It's going to have our sort of off-white semi-ridged seal and then our stacked set of seals with the ridged top and bottom. And then slightly more flexible seals in-between there. These are all kind of going to nest into each other, there's the curved end .. or curved edge that nests into the one on top of it.

So we'll have one, two, three, four, five seals in-between there with alternating colors between black and white and then our two more ridged seals on top.The stacked seals are going to measure about two inches wide, the outer diameter from outer edge to outer edge. The inner diameter is going to be about an inch and a half. So inside edge to inside edge, that measure an inch and a half. The height with them all stacked is going to be about an inch. Individually, they're going to be about a quarter of an inch tall.

The semi-ridged one that I have here in my hand, that's going to be the tallest one. The rest of them are about .2 inches tall or about seven-thirty seconds of an inch tall, so pretty close to a quarter but not quite. Our single white or off-white seal, that's going to measure about an inch and a half in diameter from outside edge to outside edge, or an inch and seven-eights on the outside diameter, and then an inch and a half on the inner diameter. It's also going to measure about a quarter of an inch tall.This product is made in the U.S.A and it's designed for your one and a quarter inch ram, or the ram cylinder on your snow plow. That's going to do it for our look at the replacement seal kit for ram cylinders on Meyers snow plow..