Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The only difference between the Viair Portable RV Air Compressor Kit part #VA39WR and Viair Portable Air Compressor part #VA96WR is that the RV Air Compressor has a longer 30' hose so you can reach your towable tires easier whereas the Standard…
view full answer...Yes, the Hopkins Tow Bar Wiring Kit part #HM77VR is a confirmed fit for your 2022 Ford F-150 platinum hybrid.
view full answer...Yes, the Curt T-Connector Vehicle Wiring Harness #C55774 uses the standard US Car Connector (see attached photo) which you should have on your 1999 Ford F-150 (behind your current connector). This connector will just plug into place.
view full answer...I'm happy to assist. The 7-way plug on your trailer will have the correct pin locations even if the colors don't match. It is not uncommon for different color wires to be used. I've attached a photo with the wiring location and function…
view full answer...There are several items you might want to try using for removal of corrosion in your 7-way trailer connector, like part #HM48480. White Vinegar A wedge shaped, slip on pencil eraser or art gum eraser Pipe cleaners PB Blaster If the corrosion is…
view full answer...The trailer light kit, #TL36RK, only comes with 2 marker/clearance lights in addition to the wiring and tail lights. Trailer light kit #TL16RK comes with 2 additional reflectors, not lights, that you could place as needed. I was looking through the…
view full answer...Some 2012 Ford E series vans will have a factory plug and some will not. If your van came with a factory trailer connector then the wiring is already there and active. But if it did not come from the factory with a trailer connector, the factory…
view full answer...The connectors that the #118261 is designed to fit should look like the picture that I attached. It is possible that you haven't found the correct harnesses on your 2009 Ford E-350 Van. The correct harness will be under the rear of the van inside…
view full answer...Assuming you have the factory brake controller on your 2020 Ram 3500 it is likely that you will need the #HBA-CAM for your HydraStar Electric Over Hydraulic Actuator #HBA16 to function properly. I reached out to Hydrastar and they are not 100% sure,…
view full answer...Yes, the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM is going to be needed on a 2024 Ford, assuming you're using a factory brake controller.
view full answer...Most newer truck manufacturers have made their integrated brake controllers compatible with electric over hydraulic actuators like the Hydrastar #HBA16 that you mentioned but we have found that it's not always consistent that they will work…
view full answer...Assuming you're using a factory brake controller, you are likely going to need the #HBA-CAM to use your Hydrastar Electric Over Hydraulic Actuator for Drum Brakes #HBA-10 with your 2023 Ford F-350. Hydrastar was unable to verify this 100 percent,…
view full answer...