Customers compare 319-r7-02 to these similar products
Products Featured in this Video
Speaker 1: Today we're going to be taking a look at the easy connector magnetic seven way railer connectors. They're available in a kit with the trailer end and the vehicle end for your specific vehicle. It's also available individually as the trailer end in different lengths. Or individually as the vehicle end for your specific vehicle.These magnetic trailer connectors take the hassle… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
We sure do so long as your 2021 Ram 1500 came with a 7-Way from the factory. It is the EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector item #319-S7-06. It will plug into the USCAR connector directly behind your…
view full answer...For an EZ connector style of 7-way that is confirmed as a fit for your 2022 Chevy Silverado 2500 you'd want the part #319-S7-06. This would be exactly what you are looking for.
view full answer...Your spray in bed liner would not be the issue in most cases but we do have a solution that we have found works in your situation. We had a customer come back and state that the first time he went to use the #16310 on his truck with a spray in bed…
view full answer...A 15 amp breaker/circuit can be used with the Progressive Dynamics 9300 #PD79RR. It does not require a 20 amp outlet.
view full answer...Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…
view full answer...For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…
view full answer...You have a Lippert Ground Control 6 point kit installed on your RV and the best solution to fix what you have is the part #LC362485. This is the replacement leg portion without the motor for the front of the setup like you are needing. Lippert does…
view full answer...The 7-way flat/blade style is more common by far than the pin style. It really depends though on what you'll be towing. If you have the pin style now and only occasionally would need to tow a trailer with the blade style then the adapter part…
view full answer...We've had customers with your Dico 45263 hub in the past get us their bearing numbers so we know that for a replacement with the wheel bolt pattern you need you could use the #AKIHUB-545-2-G-EZ-2K and you'd be set.
view full answer...Malone does offer the 2nd Tier Load Bar System for Malone MicroSport Trailer #MPG474 which measures 50" long and would work with your MicroSport trailer, however these bars are only rated for 100 lbs so you'd be loosing around 400 lbs of…
view full answer...Good news, I can help. I was able to find the service manual for the Lippert Ground Control 3.0 #LC358590 and found in that where Lippert recommends if the jacks are down for extended periods, it is recommended to spray exposed leveling jack tubes…
view full answer...No, the hall effect motor does not have to be greased, but per the service manual if the jacks are down for an extended period, it is recommended to spray the exposed leveling jack tubes with lubricant every 3 months for protection. If you live in a…
view full answer...