Result: wireless break controller

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW Item #FA92-00-0600 weighs approximately 75 pounds when you add a ball such as #A-90 for a 2 inch or #19286 for a 2-5/16 inch. Keep in mind that the weight…

In certain cases, the vehicle manufacturer will require or recommend the use of a weight distribution system for trailers over a certain weight. The general rule we use, if the weight of the trailer is over half the weight of the vehicle then you…

The #SH67FR Stealth Hitches Hidden Rack Receiver installs behind your 2021 Volvo V90 bumper beam. As long as Volvo removes the current hitch, including any additional welded on parts, you will be able to install the Stealth Hitch without any issues.…

Hey Daniel, I am really big fan of the latch system on the Demco eZ latch couplers like the part #DM13205-95. Unlike most of the current popular designs this stays easy to use over time and doesn't require a ton of finagling once its been out in…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

Hi John, So unfortunately your Greystone range hood CXW-30-CZ01 does not have parts available as it is obsolete. That does mean you would need to replace it with a different range hood. The Greystone is a vented 22" wide range hood, and a…

Thanks for the photo of your camper. Looks like a nice area. I was able to find the owner's manual for the Aliner trailer. The tires that came on the trailer originally are 4.80 x 12 and the wheels have a 5 on 4-1/2 bolt configuration. The tire…

Since you already have a 4-pin connector installed on your 2011 Toyota Highlander, you will just need the Universal Installation Kit #ETBC7. This will give you everything required to install a brake controller and a 7-way trailer connector at the…

Hey Ray, so we have the part #18159 which would work great to secure the 7-way of the #ETBC7L that you'll be installing with the Curt Echo #C51180. It's also pretty easy to install too.

If your plan was to install a brake controller you'd have to also run the black wire of the 7-Way Adapter part #30717 to the to the positive post of your vehicle battery as well as the ground you mentioned. The Curt Echo part #C51180 that you…