Result: valve stems

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

Hey Greg, yes the Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel #AM20258 that you referenced would work with a Load Range E tire ST175/80R13 like you mentioned.

Hey Tim, if you were wanting to know about how long it would take for you to complete the install of the DeeMaxx disc brake kit because you wanted to know how much time to have have set aside for DIY project I would go with setting aside a day to…

Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…

Thanks for reaching out, Nick! I'm not 100% sure what your bolt pattern is so I'll include a few different options. Some of the numbers you gave are OEM number so based off that I THINK your bolt pattern is a 5 on 4-1/2. You will want to…

Hey Tom! The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 will fit as long as you have a 12" x 4" rim. Moving from B to E is a pretty big jump, and that is going to be a light trailer even with the motorcycle on it. I am a…

Hey Tomas, the Kenda Karrier ST205/75R15 Trailer Tire with Black Mod Wheel #AM32424 that you referenced would be an excellent option if this is the current size you have. It's a Load Range D tire on a black mod wheel like you mentioned as well.…

Hi Jeff; I hate to be the bearer of bad news but the gunmetal gray Liger is also discontinued. This is a pretty common occurrence with Lionshead wheels, and very frustrating for all of us. The Aluminum Margay Trailer Wheel #LH38VR you mentioned is…

There are wheels made here in the USA but to get the right one I'd need to know your wheel bolt pattern and the wheel diameter you need. If you are unsure of what your wheel bolt pattern is or how to find it, I've added a link to a help…

Hey Dylan - both M-3 plates measure 81-3/4 inches wide, so you'd need to trim off a little bit. The aluminum one #M348FR would be easier to trim, so I'd pick that over the steel one. The hinge runs the full width so you’ll still get solid…

Thank you for the photo showing the fit of your trailer's wheel beauty rings on the original and new conventional steel wheels. I do see that the valve stem on the wheel #AM20304 contacts the ring. This might be a case of the new wheel using a…

Hello Joseph, thanks for getting in touch. What I recommend for you is the Americana Metal, Bolt-In Valve Stem #AM20906. This will fit both the 0.453" and 0.625" hole sizes. It is made of chrome plated brass and can handle up to 200 PSI. We…