Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
Published 07/20/2016 >
Products Featured in This Question
Question:
I have small boat trailer and the wheel/tire set I have is a 480-8 with 1/2 lug nuts on a 4x4 bolt pattern with a steel rim. How much torque do I need? I also have a 5X8 utility trailer with ST205/75R/15 tire wheel/tire the rim is 6inch wide steel rim. With a 5 on 4.5 bolt pattern on 1/2 studs. How much torque do I need?
asked by: David
Helpful Expert Reply:
I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material.
For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs.
For a 15 inch steel wheel with 1/2 inch wheel studs the torque is 90 to 120 ft-lbs and if you have an aluminum wheel the torque needed is 90 to 100 ft-lbs.
If you do not have a torque wrench I recommend the Powerbuilt Dual Drive Torque Wrench, part # ALL944001. This has 3/8 and 1/2 inch drive and will measure torque readings between 10 and 150 lbs.
Product Page this Question was Asked From
Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb
- Automotive Tools
- Torque Wrench
- Wrenches
- 150 ft/lbs
- 1/2 Inch Drive
- 3/8 Inch Drive
- Powerbuilt
more information >
Continue Researching
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: marine grease gun
- Q&A: Best Lug Nuts For The Kenda Tire & Wheel KE22XJ
- Search Results: trailer tires and wheels
- Search Results: valve stems
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E
- Search Results: 1/2~20 lug nuts
- Shop: Goodyear Endurance ST205/75R14 Radial Tire w/ 14" Cobra Aluminum Wheel - 5 on 4-1/2 - LR D
- Shop: Aluminum AM03 Series Matte Black Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2
- Search Results: 530~12 trailer tires and wheels
- Search Results: spare tire mount
- Search Results: 145/12
- Shop: Aluminum AM06 Black Machined Trailer Wheel w/ Red Inserts - 13" x 4-1/2" Rim - 5 on 4-1/2
- Shop: Aluminum AM06 Series Black Machined Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2
- Video: All About the Americana Trailer Wheel Center Cap
- Shop: Americana Trailer Wheel Center Cap - Stainless Steel - 3.19" Pilot
- Shop: Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM08 Wheel - 5 on 4-1/2
- Video: Review of Lippert Trailer Axles - Trailer Spindles - LC45RP
- Video: Americana Trailer Wheel Center Cap Review
- Video: Review of Tie Down Spare Tire Mount - Frame Mount - TD66FR
- Video: Review of Kenda Trailer Tires and Wheels - Karrier KR35 ST215/75R14 Gunmetal Aluminum - KE44JV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How Much Does a Boat and Trailer Weigh?
- Video: Review of Dutton-Lainson Trailer Winch - Standard Hand Winch - DL14627
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Grease Recommendation for Pre-Packed etrailer Hub # AKIHUB-545-2-EZ-2K
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Differences between Kenda Karrier KE43KV And AM10256
- Q&A: Mounting Hole Dimensions for the Dutton Lainson Winch part # DL14627


