Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These angled valve extenders make it easy to access the valve stems on your rear tires with steel wheels. Each sturdy, nickel-plated brass tube is bent at a 135-degree angle and screws onto your existing valve stem. Includes 2 extenders with caps.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Wheel Masters Tire Pressure Valve Extenders with the 135 degree bend for your rear wheels, has a quantity of two extenders. Now, these are angled valve extenders, so it would make it very easy to access the valve stems on your rear tires that have the dual wheels. These are a nice sturdy nickel-plated brass stem, and you can see they are bent at 135 degree angle, and they'll screw onto your existing valve stem. Basically, this 135 degree bend will place your valve stem in a much easier to reach spot. Lots of times on your dual wheels, your valve stem will be pointing towards the inside of the vehicle, so with these screwed on, it'll bring it back out towards you, so it makes it easy to access.
These will work on both steel and aluminum wheels, they are a corrosion resistant nickel-plated brass construction, makes them long lasting. You can see they do come with a metal valve cap, and then right here is a threaded head on the extender, this will screw onto your existing valve stem. So what you'll do is take your valve cap off your valve stem that's on your wheel, put this on there, screw this in the plate, tighten it down, make sure it doesn't leak, and then what you'll do is it'll bring it back towards you, and then you'll just remove this valve cap to be able to put air, check your air pressure, or put more air into it, makes it a much easier to reach spot. Now, these parts are made in the USA. Now, these extenders are also available on other angles, they come in a 45 degree, a 90 degree, and 180 degree, those we do sell separately on our website.
But should do it for the review on the Wheel Masters Tire Pressure Valve Extenders with the 135 degree bend for your rear wheels..
Ease of topping off my dually tires now, but installing was tricky. Wear gloves do you do not cut the back of your hands like I did reaching into the tiny opening of the steel wheels of my truck.
Researching products you carry and purchasing them have been very informative and flawless each time I use your company.
In the distant past, there was a minor mistake with an order that etrailer promptly corrected just before I could ask for a correction!
Gwendolyn Y.
4/9/2025
We are always happy to have ya, Mark!
Nearly impossible to put in without taking the tires off. It’s easier to just use the solid extension on the air compressor. To this day I haven’t put them on.
The Reese goose hitch requires you to fill the bladder. The connection which come with the hitch is nearly impossible to access. This elbow made all the difference.
Good product overall. Having a hex nut to tighten the extension to the existing valve stem ensures a tight seal. Having a rubber stabilizer included would be preferred. I added a rubber stabilizer to keep the extender from moving.
Prompt service, product is perfect for what I needed it for.
AWESOME SERVICE!!
Gwendolyn Y.
2/28/2025
Hey Johnny! We think you're pretty awesome! What kind of Rig are you using these on?
Fit well. Works like it should
They make the outer valves on my dually aluminum wheels easy.
Great product, it took almost 3 weeks to arrived. Great customer service for waving the shipping cost but it took forever to arrived.
Worked well.!
Fit perfect
Made life easier accessing air value. Just screw on valve extender and it worked filling and releasing air.
Etrailer was great, every time I have ordered from them they were great. However the post office on this last order was horrendous. Almost 3 weeks is nuts.
Despite the Q&A section indicating this product will fit on Aluminum ALCOA rims on a Sprinter 3500, they do NOT. The product seems robust but does not work for this application. If you have a sprinter van with dallies, this will not work on the outer rear tire that has the inward-pointing valve stem.
Sierra K.
7/21/2022
I have contacted the manufacturer regarding this issue and they replied that they have not had anything brought to their attention that this has happened before.
Worked great! Just what I needed.
Wheel Masters make quality tire valve extenders. These ones are steel, not brass, and extend further from the valve stem before bending. They also they have a hex nut so you can use a small wrench to tighten them. The others have a knurled nut, which is impossible to adequately tighten with your fingers, so you are forced to use a pair of pliers, which is awkward at best. No leaks so far.
I needed tire pressure valve extenders for the dual wheels on my motorhome--there was no way for me to get my hands inside the wheels to remove the valve cap and add air. I've used braided air hoses in the past but they don't seem to hold up long. These extenders are high quality, fit perfectly and with a drop of loctite won't come loose. There are other on-line vendors, but I use Etrailer because of fast shipping and quality products.
Does the trick of getting the valves where u can get to them on dual tires. Very fast delivery from vendor.
These are very handy to fill and keep filled the tire on a reversed (outer) wheel on a dual wheel setup. However, you have to be VERY careful to get the extender TIGHT on the existing valve stem or your tire will leak air constantly.
The 135 degree extenders are perfect when you don't want to use hoses. Fir just around the wheel liner and keep it rigid.
Solved my problem of not being able to check the air pressure of the outer rear wheels of my Class A motor home. Had to do a little finegiling to get the wheel covers back on but figured it out. The angle could be just a little steeper and all would be great.
Didn't work for me. Angle need slightly more bend. Ended up with input behind the wheel cover. No way to attach air compressor to it. Returned.
Great Service from the team
Excellent air flow and work great with my tire pressure monitor system too.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Victoria H.
3/14/2025
Ouch, I hope it didn't get you too bad Davey! Thanks for sharing your insight. That is a valuable tip for anyone shopping these.