Search: tpms sensor > TPMS Sensor >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
They Thomas, I'd be glad to help you pick out which tire pressure monitor system would be better for you. So generally what we have found is that the TST system part #TST-507-RV-4-C is a bit more rugged and will withstand a little more abuse…
view full answer...Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…
view full answer...Hey Joe! Internal sensors typically last longer, are shielded from the elements, and will get a slightly more accurate reading. They also provide protection against theft if that is a concern. The down side is you have to remove the tire to mount…
view full answer...According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…
view full answer...Hi Cindy! Better can be a relative term when it comes to things like this. Internal sensors like those found in the Tuson Towable Tire Pressure Monitoring System - 4 Sensors - Brass Interchangeable Valve Stems #335TPMS4WIVS and TST TPMS - Color…
view full answer...Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
view full answer...Hello CC, thanks for reaching out. Short answer, no, I wouldn’t mount it inside the battery box. The Tire Linc Pro Repeater #LC67VC is supposed to be mounted in a spot that’s as open and unobstructed as possible, ideally in a front compartment with…
view full answer...Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
view full answer...Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
view full answer...Hi Angela! Yes, it will. The etrailer Cargo Carrier Bag #988501 measures 59" x 24" and was designed with 60" x 24" cargo carriers in mind. This will fit nicely on the Benton MoveHitch #B86VR, and will keep your camping gear…
view full answer...Hey Angi, welcome back! You will most likely need to use the Swagman Bike Frame Adapter Bar item #S57FR for a step thru framed bike. The hooks on the Swagman E-Spec Pro Bike Rack item #S45SR don't go down far enough to secure bikes with real low…
view full answer...Hello Dennis, thanks for reaching out. The repeater, or lack thereof, would definitely explain why your monitor is not picking up the sensors. I took a screenshot of the installation instructions for the Signal Booster/Repeater #TST-507-R and…
view full answer...Filters
- 45 results
Vehicle Fit
Filters
