Replacement Flow Through Sensors for a TST TPMS TST-507-FT-8-C 507 for RVs

Question

Question:

I want to be sure the three E22 tire sensors in my cart go with the TST TPMS in my cart. My DRV has four wheels and six wheels for the tow vehicle.

asked by: Michael B

0

Expert Reply:

Hey Michael. The Replacement E22 Flow Through Sensor for TST 507 Series item # TST67FR do indeed work with the TST TPMS for RVs - Color Display - Signal Booster - 8 Flow Through Sensors item # TST38FR.

Please note that metal valve stems are required for flow through sensors.

What kind of trailer do you have?

expert reply by: Jerred H

0

Jerred H.

9/8/2025

Hey Michael, did you find that the E22 tire sensors worked well with your TST TPMS setup? I'm asking because your experience could really help others looking to set up their tire monitoring systems.

Michael B.

9/8/2025

@JerredH Yes, the E22 sensors worked great. I did have some issues with the metal stems working loose on three of the four wheels for the RV. Easy fix with a wrench to tighten them. When I ordered the monitor and sensors, I was told that I had to wait for a new shipment for the 4 other sensors I needed. Have yall gotten them in yet?

Jerred H.

9/9/2025

@MichaelB Yes, it looks like we have. Glad you're liking the sensors and got the loosening issue sorted out.

Answer 1

Hey Ron, if you check out the 7:05 mark of the install video I attached to this page for the Voyager WiSight 2.0 part #ASA57YR you can see how Kevin attaches the camera to the vehicle running light circuit. You might have to scroll down a bit to get…

view full answer...

Answer 2

The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR does not have a power cord or adapter to allow it to plug into a USB outlet so you would need to install a 12v outlet, like part #RM-9332, in your vehicle in order to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Replacement Flow Through Sensors for a TST TPMS TST-507-FT-8-C 507 for RVs

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching