TorkLift Tie Downs for 2016 Ram 2500 Crew Cab with 6-1/2 ft Bed

Question

Question:

Hello, just wanting to confirm that these brackets will fit my truck. 2016 ram 2500 crew cab, running boards at the end of the cab, 6-1/2foot bed, thanks.

asked by: Christian

0

Expert Reply:

Hey Christian,

Yes, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL29DR will fit your 2016 Ram 2500 Crew Cab with running boards as long as you have a factory hitch receiver or no receiver at all.

If your 2016 Ram 2500 Crew Cab with running boards has an aftermarket hitch receiver, you will need TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL35FV.

If your 2016 Ram 2500 Crew Cab with running boards has a TorkLift SuperHitch Original 20K or TorkLift SuperHitch Magnum 30K hitch receiver, you can use TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL79PR as a powder coated steel option or upgrade to TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL67ZV for the aluminum and stainless steel option.

Whichever option you choose will need turnbuckles, so you'll want to go with the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 # TLS9529-2-LK to secure and lock your camper with ease.

Are you prepping your camper for an upcoming trip or upgrading your current setup? Where are you taking your camper?

expert reply by: Jerry B

0

Answer 1

We have confirmed with EcoHitch that the hitch part #306-X7389 fits your 2011 Audi A4 Sedan. We had the chance to install the hitch on a similar A4 sedan and we found that it fit and worked well. Check out the install picture I attached.

view full answer...

Answer 2

Hey Dan; there isn't an actuator that will slide in place for a replacement of your Tie Down 80LP, you'd have to go with a new actuator. From what I can find, this actuator bolts onto a 3" wide channel tongue, so you can replace it with…

view full answer...

Answer 3

Hey Ks, Torklift only sells their tie-downs as a kit with new mounting hardware and everything. So for your 2017 Ram 2500 you'd need the kit #TL29DR you were looking at. What kind of truck bed camper do you have?

view full answer...

Answer 4

Hey Jerry! The #TL29DR uses the tie-downs designed for models with running boards. Since you do not have running boards on your Ram 2500 you need the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL37ZV. You will also need turnbuckles…

view full answer...

Answer 5

Since the air bag suspension enhancement kits like the #AL57289 that you referenced would limit your suspension articulation since they attach at the top and bottom of the bracket you'd be better off with a kit like the Timbren part #TDR2500D…

view full answer...

Answer 6

Hey Mike, thanks for reaching out. Air bags are going to be the best option for this. For your 2024 Ram 2500 Power Wagon I recommend the Air Lift LoadLifter 5000 Air Helper Springs #AL57289. The main reason being the air bag brackets are made to be…

view full answer...

Answer 7

The Firestone kits are not compatible with in-bed hitches like your B&W. My recommendation for your application is the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57289 which is compatible with in-bed hitches. Then for your…

view full answer...

Answer 8

Yes, the #TLD3109 fits many versions of the 2015 Ram 2500. Here is the fully list: 2014 - 2017 Ram 2500 6-1/2 Foot Bed - with board or step underneath truck bed and with a factory installed hitch 2014 - 2017 Ram 2500 6-1/2 Foot Bed - with board or…

view full answer...

Answer 9

Hey, Gregory! That's a really good question. There are a few different factors I'll take into consideration when suggestion what way to go but If you strictly want to know my personal opinion, I prefer the camper tiedowns that are frame…

view full answer...

TorkLift Tie Downs for 2016 Ram 2500 Crew Cab with 6-1/2 ft Bed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching