These aluminum steps attach to the door frame on RVs that do not have a step well installation point. 2-Step design extends to 3 steps with pull-out booster step. Fine-tune height and level stairs with landing gear. Glow tape lights step surface.
Features:
Specs:
Will Torklift GlowStep Revolution Uprising Steps Work for You?
Fold-down steps are typically installed on travel trailers and some RVs. The fold-down steps from Torklift lift up to latch into your camper's doorway for storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Torklift revolution Uprising Steps install inside your camper's doorframe. Measuring for this may seem tricky, but once you know what to look for, figuring out the right fit for your RV doorway is easy.
First, you will need to measure the doorsill plate, both the height and the clearance between it and the bottom of the door. For the Revolution Uprising steps to fit, the doorsill height should be between 5/8" and 3/4", and the clearance should be at least 3/8".
Next measure between the door frame flanges - the doorway width - to determine the step size that will fit into your camper's doorway. You will need a doorway that is at least 26" wide for these steps to work.
If it turns out you have a narrower doorway, there are smaller step assemblies available that fit 24" wide doorways. A full list of the available steps is below.
The doorway threshold will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
The chart below displays entry height measurement ranges in the first column. If you determined you need a mounting bracket that fits a 24" doorway, the step part numbers with that width are in the second column. If you determined you need a bracket that fits a 26" doorway, the step part numbers with that width are in the third column. Choose the doorway width that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 24" Doorways | 26" Doorways | 28" Doorways |
|---|---|---|---|
| 19-7/8" - 27-3/8" | TLA9103 | TL85SR | TLA9003 |
| 27-3/8" - 34-7/8" | TLA9104 | TL25SR | TLA9004 |
| 34-7/8" - 42-3/8" | TLA9105 | TL52SR | TLA9005 |
| 42-3/8" - 49-7/8" | TL77YR | TL32SR | TL64YR |
How Do You Install the Steps?
To install the steps:
-Make sure the brackets are flush against the doorframe and the floor
Very good product and company to do business with.
This was very easy to install. Worked just like I wanted it to.
Easy install. Solved our lack of space issues while stored at home. Quality product. Packaging was horrible
Bought 2 items from you. Both worked well. I would recommend this company to other people
Awesome steps. Easy install and easy to use. Very sturdy.
Everything went well and customer service was on point
Surprisingly easy to install with very good instructions.
Love the way they work.
Poorly packaged
Entry bracket was bent
Where steps mount was bent and broke the weld
Had to reweld it
The package was not in the best shape upon arrival, but the steps appear to be unharmed. The installation instructions were laid out nicely and very clear.
Took me an hour to install the steps on our Winnebago Mini Drop WD1710. They fit with no alterations to the door frame.
They are sturdy and much easier and safer to enter and exit than the original single floating step.
The steps worked great. Good concept but unfortunately my wife could not raise them up by herself so we had to go back to the strut assisted steps that came with our RV.
One of the better accessories we've added to the trailer. Makes life easy unwinding and rewinding the bulky 50a cord. Easy install.live it !
Disappointed that one os the legs has no rubber stops. ALSO something as simple as quality nuts for the bolts. I had to go to home depot to buy more since three of them wouldnd even go on the boltFor the money these cost there is really no excuse.Probably should have give it a three considering the way the ups driver through the box on my porch when the box clearly states fragile. I did get it installed and it does work as described. How about sending some rubber stops for the feet.
Just finished the installation. I replaced Mor-Ryde steps, which came stock in our Grand Design. The original steps are good, but we had Torkilifts on out prior camper and really liked them. They are sturdy and the level of the camper is not an issue anymore when wanting to open the camper door wit the Mor-Ryde steps. Definitely would recommend. (They are pricey, but it is a quality item.)
Do you have a question about this RV Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.