Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
It sounds like you are looking to add a second camera, so in order to do so you will need to add a Rear View Safety Multiplexer Box - 3 Channel #RVS-501N to switch between your cameras as I don't believe your system has multiple camera options.…
view full answer...Hello Gwen, we do have a potential option for you, but unfortunately, there is nothing made specifically for a 5' (60") entry height. The closest thing we have is the TorkLift GlowStep Stow N' Go Scissor Steps #TLA7836 which has 6 steps…
view full answer...Hey Barry, The Brophy Camper Scissor Steps #AS04 come with a bracket that the top of the steps slip into, and then they can be removed before you leave the campgrounds - so they have a type of quick disconnect system in place. If you wanted to keep…
view full answer...Yes, you can mount the Brophy Steel Scissor Steps, #SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long…
view full answer...The 2019 Ford F-150 trailer wiring DOES NOT like trailers with LED taillights or lightbars that attach to the vehicle and use trailer wiring for activation. This is a problem we saw first with German vehicles a while back and an adapter was made to…
view full answer...The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…
view full answer...Hey Joseph I do appreciate you reaching out but sadly we do not carry the Atwood jack cover you are looking for. A lot of the Atwood stuff had been discontinued so it may prove difficult to find. I did do a quick google search and it looks like they…
view full answer...I spoke with my contact at MaxxAir regarding the MaxxFan Deluxe Roof Vent #MA00-05301K that you referenced. He stated that the printed circuit board on this unit would not be able to handle reversing the polarity. Doing this would likely burn up the…
view full answer...It's hard to tell from the picture but it looks like the bulb seal sits on your wiper seal so you'll have to first remove it in order to get to the wiper seal. These are typically just stuck on with some 3M tape and possibly a few screws so I…
view full answer...Hey Justin, I would recommend the Progressive Dynamics part #PD79RR which is close in amperage to what you have now and will work great. If you were to go to a 75 amp option you'd potentially run into issues with your current wiring not being…
view full answer...Hey Keith. The stainless steal Stromberg Carlson Folding Handrail item #AC-300 is going to be by far the strongest out of those three options. The item #AM-800 and item #AM-300 are both aluminum. The Stromberg Carlson item #AC-300 1" thick,…
view full answer...Yes, we do. We've got three options depending on the height of your entryway. I have listed them below: 2 Steps - MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways item #MR86RR. This will work with entry heights of…
view full answer...