Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck…
view full answer...The parts for the Curt Q25 Fifth Wheel Hitch will fit the Ram M25 hitch. The parts that you need are the following: -Replacement Handles for Curt 5th Wheel Hitches for Ram OE Towing Prep Package #C78UR -Replacement Rear Anchors for Curt 5th Wheel…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…
view full answer...You're not going to have any problems mixing Dexter and Lippert components on trailer axles over 10k-lbs in the same manner as below 10k-lbs as long as the measurements on the replacement parts are the same- i.e. bearing sizes are the same, etc..…
view full answer...The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…
view full answer...I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…
view full answer...I believe I have a solution for you, but I think you may need to remeasure your cutout and/or compare the measurements of your current latch with one of ours. Since latches tend to be fairly universal in size when it comes to the RV world the Global…
view full answer...We have several options, the cutout dimensions are what you want to match. There is decent plus/minus tolerance when measuring. The cut out dimensions for the Bauer Door Latch #BA85FR are 6 inch by 4 inch and the door thickness it is designed to fit…
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
view full answer...Congrats on the new truck! To add a autoslider 5th wheel hitch you will first need to add a set of rails to your 2023 Ram 2500. There is no aftermarket way to add a puck system or below bed mounting method for an autoslider 5th wheel hitch. I…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...If you only have a 1 inch lift you wouldn't need a spacer when installing the Air Lift Load Lifter 5000 part #AL88231 on your 2021 Ram 3500.
view full answer...Related Searches
Filter Your Search
Contact and Help