B and W Companion OEM 5th Wheel Hitch Installation - 2020 Chevrolet Silverado 2500 BWRVK3710 Video

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

Hey Oscar, thanks for reaching out! The PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package #PUL36ZR will take about 2 hours to install on average, according to my contact at PullRite.

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

David, the hitch head #PUL39ZR for the PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package #PUL36ZR weighs 84 lbs, and the base #PUL59ZR weighs 81 lbs.

While it is recommended to use a sliding 5th wheel for a short bed truck so that you have plenty of clearance for sharp turns, it is not necessarily required as it depends on your truck and trailer configuration. If you are using the same trailer…

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

Based on the information you provided you have a 1621 bolt pattern so the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP34FR would be the correct replacement for you. This will come with a generic wedge kit, but the #SWW-06 will be a…

This is a really good question. So the reason is because a Sidewinder pin box like #RP34FR puts quite a bit more twisting torque on the hitch and how it attaches to the vehicle. So it requires a hitch that attaches to the truck bed in at least four…

The holes are spaced 2-1/2" on the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks item #C29NR. This will fit most if not all weight distribution shanks on the market. The hole spacing on Equalizer weight distribution shanks…

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.