4-3/8" Diameter. Surface-mount LED puck light illuminates the interior of your RV, camper, or trailer. Energy-efficient LEDs emit brighter light than incandescent bulbs. Low-profile light has easy, bolt-on installation.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the Gustafson RV LED Puck Light. This low-profile puck light illuminates the interior of your RV, camper or enclosed trailer. Internally, it features long-lasting energy-efficient LEDs that burn brighter and last longer than incandescent bulbs. With LEDs you don't have to worry about changing bulbs, and you don't have to worry about brittle filaments. They're also a lot more efficient, when compared to incandescents.The button here at the center lets you easily turn the light on and off. It has a durable, white plastic housing and lens to surface mount installation, mounting hardware not included.
You can see down here that we have multiple holes. The mount holes are these three right here. One, two and three, and they're separated on center by around two and 7/8 inches from one another.It's QAI certified. When it comes to the overall diameter of the unit, measuring that says go in this direction. It's about four and 3/8 inches.
The overall depth once it's installed from very back to the outermost point is about one inch. We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. We'll also turn off our overhead light so you can see it in a low light setting. It is a two-wire design, so we have a black wire, which is the main power wire, and then we have a white wire which is our ground wire.You can see here that it sends out a really nice consistent signal. The entire lens area is lit on this unit.
The button in the center allows for easy on and off control of the light. Another neat advantage of LEDs is they have a much faster response time when compared to incandescents. The wattage for this unit is three watts.That's going to do it for today's look at the Gustafson RV LED Puck Light.
Average Customer Rating: 4.8 out of 5 stars (34 Customer Reviews)
4-3/8" Diameter. Surface-mount LED puck light illuminates the interior of your RV, camper, or trailer. Energy-efficient LEDs emit brighter light than incandescent bulbs. Low-profile light has easy, bolt-on installation.As always, great service on my order. I will continue to use etrailer for all my rv needs. Thank you.
they bid not last as that long some went out after a few mouths and some longer I need to order some more after soon
Jenny N - 12/30/2021The products seem to be well made.
I got these lights to replace the ones that came with my 2018 Jayco Hummingbird trailer. I didn't like the color that the OEM lights gave off and the on/off buttons on them didn't always work. These new lights are perfect and easy to install!
Great product and even greater company. Always helpful and fast to ship orders
Have been ordering from etrailer for years. Always tops in customer service, and always very prompt shipping. They seem to have what I need for rv parts and bike transport accessories.
I received this product quickly and was packaged well. I replaced 6 puck lights that did not have switches. The original 6 lights were all on one switch. I now can decide which light I want on. Easy to install ,excellent product.
Myron - 04/12/2020Light is perfect installed it in the camper and it works great
Exactly what I was looking for, Good lighting but not so Bright it hurts you eyes. Great upgrade
I’m not giving this a five star because that would depend on longevity of the LED light and on/off switch. LED lights are not all made the same and or the electronic board for the light. For example this will replace, not exact replacement, a closet light in my TT that failed after 4 years. No I don’t leave closest light on continuously. It appears to be of better quality than the original.
Bought 2 replacement lights. Easy to install and continue to work well.
The install screws came inside the lense which has to come off to install. don't test it before removing the screws rolling around in it. The power button in the middle doesn't click with the cover on but does fine with cover off. Had to bump button to bench grinder to shorten it to allow outside metal button to release it to get the click needed to cycle power. Light is good and low profile. White ground and black wire hot.
Just what I needed and fast Great serv ice
Product was received very fast. Excellent service. Existing led lights had an annoying blink. The new ones were very easy to install. Great product
I had some 1980s crapola dc lights in my 1958 Shasta and they put out very little light, looked tacky and used too much juice. I replaced them in a jif about 5 minutes per light and they look great, the light level and color is perfect. Not too white not too bright, just right.
Purchased 4” led with on off switch in the center of the light and without. They are much brighter than original 3” led’s in RV. Easy to remove old and replace with new.
Would buy from this seller again
Same as first review
Direct replacement. Worked as expected.
As advertised, easy install.
Excellent light. Very good quality. Looks great. Installed easily and securely and lights up my rv perfectly!
this is the second purchase of this product and they work perfect.
Well worth the price quick and easy change out. The
Easy to install and after a year still working great
Work as advertised
Do you have a question about this RV Interior Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.