To remove bulbs from the Round Trailer License Plate Light with Mount Ears - Chrome Plated #LP71CB, you simply remove the screws on the outside mount, remove a plastic dome and rotate the bulb to remove. The bulb is a CT67. We don't have any LED…
I have a solution for you, but the Round Trailer License Plate Light with Mount Ears - Chrome Plated #LP71CB does not come in an LED light version. However, the LED Trailer License Plate Light Kit with Bracket - Submersible - 2 Diodes - Clear Lens…
There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…
Hey Frank, I looked up that rotor and it looks like it's a 10" rotor with a 5 on 4 1/2 bolt pattern. That being said, you can use the Kodiak 10" Hub-and-Rotor Assembly #KHR10D as a replacement, with the Grease Seal #RG06-050, the Timken…
Hello James. I can definitely point you in the right direction, but the SAE number is not actually a part number, so this is not a good way to look up a specific light. The light in your picture looks very similar to the Optronics LED Side Marker…
We don't have the exact lock you currently have installed in your Featherlite Horse Trailer but looking at the picture you attached I believe the Global Link RV Entry Door Locking Latch Kit #295-000019 will work great as a replacement. To be sure…
Hey Ross, it doesn't look like we have GE AC unit air filters but I was able to find out that GE does sell them. There are quite a few part numbers for filters so I would need to know which specific model of GE AC unit that you have to see what…
Hey Robert, I found the hub you mentioned and it's actually not a Lippert hub it's made by AP and it's a 7k axle hub with a 9/16 inch diameter wheel stud. The drive in wheel stud part #7-132 could work for you since it is a 9/16 inch stud…
I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…
A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…
There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.
Filters
