Tight space. Low voltage. Lousy weather. You still need to be seen. This 3/4" LED marker light mounts with a grommet, throws amber light through a smoked lens, and delivers 180-degree coverage without cluttering your rig.
You don't always need a big light to stay seen, especially when space is tight and terrain's unpredictable. This 3/4" LED marker drops into your rig's frame or trailer rail and delivers amber light right where it's needed, even through a smoked lens. It's PC-rated, meaning it covers a full 180 degrees for side, front, or rear visibility, all from a single point.
With a sealed polycarbonate body and grommet mount, it holds tight against the surface and keeps water, dirt, and road debris out. And since it only pulls 0.052 amps, it won't overload your circuits, leaving you room for all the other gear your setup demands.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steve here with etrailer.com. Let's take a look together at our Optronics LED Clearance or Side Marker Light. Folks, this is a standard 3/4 inch round with a smoke lens with an amber LED. So as you can see, I've got it lit up. And if I shut it off here, you can see that smoke lens a little better. And let's power it back on.
Now, I do wanna shut off the overhead lights while I'm talking about it a little bit, so you can get a better idea. So again, this is gonna be used from the front visibility or from the side visibility. Again, whether you're using it that way or the other, you have 180 degree visibility, meeting all road rules and expectations from DOT, et cetera, with this one light. And it's all durability rated, meaning the seal polycarbonate housing is gonna withstand beating, road debris, maybe rocks, or things that pop up while you're driving. And it does use quick, easy wiring.
It's a two bullet lead that's gonna tie into your existing lighting, switches, circuits. You're not gonna have to worry about adapters or anything like that. Let's go ahead and shut this off, so I can give you a better view of that. So again, it has the bullet-style connectors. You do get the grommet included right there on the end of the light, so you can rest assure that you just pop it in the hole with the grommet, it's gonna stay snug in place.
As we know, LEDs use very, very little power. This one only pulls 0.052 amps, so it's gonna be great for multi-light trailers, maybe the older rigs that have older wiring that you haven't overhauled yet, and those kinda things as well. That will wrap up our quick look together. I'm Steven, thanks for watching.
Happy
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.