Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 7-1/2" Long pigtail.
Features:
Specs:
Maintaining a functioning lighting system for your boat trailer is required by law. Make your life simpler by installing lights that you can trust be to be submerged regularly. The housing and lens of this light are sealed together to create a single unit, which means that water will not get into the light to damage the diode or circuit board. Also, a special urethane potting is used to encapsulate the circuit board, further ensuring protection from moisture and dust.
A PC-rated light produces a 90-degree angle of light on either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this recessed mount mini red LED side marker boat trailer light. This waterproof mini LED red light can function as a rear side marker or clearance light for your trailer when properly mounted. And as you can see, I already have this hooked up to my power supply. And this single premium LED is going to be energy efficient for you, long-lasting and vibration resistant.
This is rated for up to 100,000 hours of operation. So you see how bright it is with my studio lights on. Let me go ahead and turn my studio lights off just to give you a better demonstration of its brightness. I'm gonna shine it here on my tabletop. And then let me zoom out and shine this on the wall behind me, again, just to kind of give you an idea.
Probably can't see the light too well through the camera on the back of my wall there. But you can get an idea of what this is going to look like somewhat at a distance in the dark. We're gonna zoom back in. This is a PC-rated light, which means it produces 90-degree angle of light to either side of its center line for a total of 180 degrees of coverage. The beam pattern can be clearly seen when you are standing directly in front of the light as well as when you are standing on either side of the light.
So rather than buying side marker and clearance light separately, you can mount this single PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both. This is a durable UV-resistant, clear lens over a red LED in a sealed, waterproof construction. The housing in the lens unit are waterproof. And so the the waterproof construction of this light is going to make it ideal for use on trailers that may be submerged, like a bow trailer. Also, a special urethane potting is used to encapsulate the circuit board, further ensuring protection from moisture and dust.
This has an IP rating of 68. So this is going to be a recessed-mount installation with the included grommet. It does require 3/4 of an inch in diameter cutout. Let me pull out my ruler here and just give you some basic measurements. The overall diameter, as you can see, we are sitting right at an inch. And then the thickness, we're sitting right at about 7/8 of an inch. So this is going to be compatible with your 12 volts DC system. It hardwires to your application with a 7 1/2" long pigtail. The input voltage is 9 volts to 14 volts. And it has a power draw of 0.06 to point- Let me try that again. A power draw of 0.06 to 0.08 amps. This does meet or exceed FMVSS 108 standards. And this does have a limited lifetime warranty. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.7 out of 5 stars (102 Customer Reviews)
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 7-1/2" Long pigtail.a fun little project, I put new tail lights on my trailer and found out I had one bad wire , so I pulled new wires and added these onto my Roller guides , look really nice!
Lights worked great. Etrailer rep that I talked to helped me get the exact lights that I already had on the trailer
Work great. I installed three in back of boat trailer. Been working even when backing boat in and out of the water.
The RV clearance light are much better than original ones. They are brighter and set closer to the surface. I replaced 2, 1 red and 1 amber and they fit perfectly. Wire color code was different, but just touch wires together and if it lights connect it.
Great quality lights,,, will be putting them on the trailer tomorrow.
There were no grommets in the package.
I would definitely recommend purchasing! These are my favorite style of side marker lighting, small but bright.
These LEDs are an exact match for my SportTrail trailer (custom for a 26' center console). They are MUCH cheaper to purchase from here than direct from SportTrail.
Would definitely purchase again! These are my favorite style of side marker lighting.
These mounted cleanly in the fenders with in the provided rubber grommets, making them nearly flush with the surface, yet has 180 degrees of light. I wired them into the existing running lights and are BRIGHT, day and especially at night! Now, I can see the where the trailer is when backing. Submersible too, which is a terrific bonus. I discovered that unlike most LED lamps I've used, these must be connected black to positive and white to ground. I did not find this small detail in the description, or the video which shows connecting to two alligator clips which were both black. This needs to be clearer, but overall, ETrailer has done it again, with items we need to keep things usable and safe.
Would definitely purchase again! These are my favorite style of side marker lighting.
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
I replaced a Tail Marker on my flatbed truck. This one was was exactly like the existing lights and matched perfectly.
Had an issue with my order. This was corrected immediately. Great customer service!
This works perfect, I'm very happy with this marker light. Thank you.
WAS EASY TO ORDER OFF OF SITE AND SHOWED UP WHEN STATED. WILL BE USING THIS SITE A LOT MORE.
These little lights are bright and perfect for a 3/4" hole. Easy to install and wire up.
Great quality product and fast shipping
As always Etrailer has a great selection of parts and great service.
I’ve always gotten good service and products from E Trailer
Great product
Parts were as descibed at a great price and arrived in a timely manner.
Fast service, very pleased.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.