If the manual crank handle for the Lippert Electric Trailer Jack part #LC285318 will not extend or retract the leg then that points to signs of internal damage. The bevel gear could be stripped or the inner tube could be bent which would both prevent…
The Replacement Bolts for Equal-i-zer Weight Distribution Head part #EQ90-02-9100 contains four 3/4" flat washers that go on the bolt that attaches the head to the shank (see photo (#17)). If you instead need the washer that controls the head…
For your 2002 Jeep Wrangler the difference in the base plates is different application for what type of bumper you will have on your vehicle. The Roadmaster XL Base Plate Kit, #1420-1, will fit a 1999 to 2002 Jeep Wrangler single tube bumper or a…
I am happy to help you find the parts to flat tow your 2004 Jeep Wrangler. The Roadmaster Direct-Connect Base Plate Kit part #RM-521424-5 is a better option for a base plate compared to the Roadmaster #RM-521424-4 that you referenced because the…
I spoke with my representative at Equal-i-zer and the grooves that you see at the top and bottom of the spring bar receiver on the head is normal wear. He also mentioned that keeping the receiver lubricated will help reduce on wear in the future, but…
I spoke with my rep at Kuat and received this information. Both the Piston Pro item #KU76ZR and the Piston Pro X item #KU98VR Bike Rack are only rated to be used behind a class B RV with the hitch mounted the way you mentioned. They each have the…
There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…
Hi Eddie! What you are looking for is the Roadmaster Replacement Arms for Base Plate Kits #RM-ARMS. The 1541-1 is a Roadmaster baseplate part number and having that will help. You will need to scroll down the page a little bit and click where is says…
The Draw-Tite Sportframe Trailer Hitch Receiver #24899 is going to be the least obvious receiver for your 2014 Honda Accord EX-L Sedan. Draw-Tite recommends their Drawbar #3593 used in the rise position with either a 1-7/8" Hitch Ball #19256 or…
Hey Steven, If you're looking for replacement mounting hardware for your TSX's trailer hitch receiver then you can order another using the #RHK page. You'll enter in your trailer hitch's part number into the box and we can send you…
Hey Marc! Between the Curt item #C11496 and the Draw-Tite item #24899, I would go with the Draw-Tite Hitch item #24899 because you see less of it after it's installed. Functionally, they both install in the same way and have the same capacities.…
Hey Tim, you could use the Equal-I-Zer shank part #EQ90-02-4800 in place of the Blue Ox Shank part #BXW4028. This will weigh less and not hang down nearly as much. How do you like your Blue Ox setup?
Filters
