Sturdy steel ball mount with hollow shank measures 12" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (1985 Customer Reviews)
Sturdy steel ball mount with hollow shank measures 12" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.The receiver is exactly what I was looking for. Put it on a 2016 chevy traverse and it is the right length for pulling a trailer. Looked at 6 1/2 inch, too short. Quality is good also. I give it 4 stars.
The Ball Mount was noisy upon hitting bumps, uneven road, etc. I have since gone to a shorter, dampened ball mount but I have to remove the spare tire when I use it!!! Ruben
Product works okay as the o.d. is small and makes a sloppy fit to the receiver.
Good products..
Hasn't fallen off yet
Very beefy well made
fast shipment--good quality>>>
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
The drop hitch worked perfectly with the front hitch receiver to locate the ball at the perfect height. Parking a trailer in a tight location is easy using the front hitch.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Very nice, good quality ball mount. Will work great to tow my car trailer.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Installed in 5 minutes. Looks great and works excellent. Thank you
Juan c - 05/27/2021Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
Tom W - 11/13/2015Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Attached are the before and after photos of my truck/trailer after installing the 11" drop trailer hitch. As you can see there is a big difference in the drop which puts the trailer parallel to the ground. I can't wait to load it and see how it maneuvers going down the road at 55 mph.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
I needed an extended ball mount for my new Jeep in order for my utility trailer tongue to clear the rear mounted spare tire. Item is as described on the web site and was received earlier than expected. etrailer has great customer service and is my number one go to place for towing and trailer supplies.
Paul D - 07/17/2018Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
jd - 11/22/2014Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
One year later and I'm having no troubles at all with my Draw-Tite hitch and of course the ball mount is tough as could possibly be. I love and depend on etrailer for all my towing related needs. By the way, Courtney is super helpful!
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Needed an exact length and drop so I could open my tailgate with my 12' enclosed trailer attached without dragging on hills and bumps. Couldn't believe the selection, was able to get exactly the dimensions I needed here.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
The hitch was easy to install. So easy, that i have installed three more for friends. The instructions were clear and in each case, it took less time than I thought it would to finish the job. Each was installed in my driveway with basic tools.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Great products and service. I was able to order everything I needed to add a tow hitch and ball to my 2006 Jeep liberty. Very fast shipping. They even called me to verify orders and availability. Clear and easy to follow installation instructions. I hauled an [retailer] trailer from Texas to Ohio without any issues. Even bought a trailer and use it frequently for hardware stoe runs.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Great match! Easy to install. Better match than my wife! I should have got hitched with this hitch! Play time! ATV.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Purchased for my 2019 F350 hard to find 3” receiver. Massive steel construction, powder coated with machined ball floor. Fits well in receiver. This ball mount is built to get the job done.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
The team and selection at etrailer.com is excellent and the Draw-Tite Draw-Tite Ball Mount Trailer Hitch Ball Mount purchased installed easily and the tech support team answered my questions in a timely manner and provided the support needed. I will certainly search their inventory for my future trailer needs.
Review from a similar Draw-Tite Ball Mount in Trailer Hitch Ball Mount
Product as advertised. Wished I'd paid more attention to what was included and not included. Seller web site did a good job indicating other suggestions on what would go with what you were viewing. So much so, I became dependent on it, and over looked the fact that the pin to hold the ball mount was not included in either the receiver or ball mount. I overlooked this and had to go out and buy this somewhere else. Other than that ordering was easy, and I received everything in a timely manner. It's worth noting that their tracking was dead on as well. It's nice tracking the progress of a package you are waiting for so you can plan your installation. And again, they do a nice job of following up letting you know they received, shipped the order and a link to follow it in transit.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.