Flat Towing Package for 2019 Jeep Cherokee

I have attached for you below the recommended procedure to flat-tow a 2019 Jeep Cherokee Trailhawk per the owner's manual. The last step states to place the ignition in the off position so that is what I must recommend. 1. Bring the vehicle to a…

As long as your 2020 Delano itself is rated at that 5,000 lbs and it isn't just the hitch itself, I see no issues flat towing your 2020 Jeep Cherokee Trailhawk behind it. I just recommend avoiding loading up the Jeep with cargo so you aren't…

I would be happy to go over everything you need to flat tow your 2019 Jeep Cherokee Trailhawk with your 2019 Forest River Forester. Unfortunately the Blue Ox Base Plate Kit #BX1143 you mentioned is not compatible with your Blue Ox Alexxa Tow Bar…

For your 2019 Jeep Cherokee you'll need to first start with a base plate kit. For that you'd want the part #RM-521452-4. This fits the Latitude, Latitude Plus and Limited models. If you have an Overland, Trailhawk, or Trailhawk Elite…

For the 2019 Jeep Cherokee Trailhawk 4x4 with the 2 speed transfer case, you'd use the Blue Ox #BX1143 which is compatible with Blue Ox tow bars, along with certain Roadmaster and Demco tow bars if the correct adapter is used. I'll link you…

The Mopar Recreational Flat Tow Wiring Kit will absolutely not be needed for your 2019 Jeep Grand Cherokee Trailhawk. This was only a requirement on a 2014 to 2018 as the tire wobble issue this was designed to combat has since been rectified. As to…

The Blue Ox Base Plate Kit part #BX1143 which replaced the Blue Ox Base Plate Kit part BX1140 is lighter because there is less material. The update was made to clear sensors that were added to the 2019 Jeep Cherokee Trailhawk therefore they needed to…

It order to flat-tow a 2021 Jeep Cherokee Trailhawk you'll need a few different parts such as a base plate kit, tow bar, wiring, safety cables, and braking system. I have attached for you below a full, complete list of recommended parts. etrailer…

The Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required on select Jeep Cherokee's in order to activate the electronic power steering (EPS) system while the vehicle is in tow mode. This part must be obtained from the dealer but…

We have all of the parts you are needing. First things first you will need to add a base plate kit to your 2021 Jeep Grand Cherokee Trailhawk 4WD. I recommend the Roadmaster Direct Connect Base Plate Kit #RM-521451-5 due to it having removeable arms…

It sounds like you're wanting to install a battery charge line on the Jeep to charge the battery while in tow and then run that through the 6 to 7-way umbilical. If that's the case we have just what you need, the Roadmaster Battery Charge…

While it's true that the Mopar 68321424AB wiring harness has been required in the past, that changed a few model years ago so you will not need it to flat tow your 2021 Jeep Cherokee. For a complete flat towing setup you will need a base plate…