Will MORryde ALLTREK 4000 Add Height To 2026 Alliance Avenue 32RLS
Updated 06/08/2026 | Published 05/12/2026 >
Products Featured in This Question
Question:
I have a 2026 Alliance 32rls which rides about 4inch nose high. It was much worse, but after changing the pin box and hitch this is the best I can do while leaving proper clearance to the bed. It currently has the CRE3000 and I am wondering if the AllTrek 4000 will give me another inch of lift at the axles. Thank you, Don
asked by: Don S
Expert Reply:
Hi Don! The MORryde ALLTREK 4000 # MR89DR can potentially add some height to your 2026 Alliance Avenue 32RLS. However, it really depends on the height of your existing equalizers. Since we know you have the CRE3000 like # MR87ZR the height of those will be 3-1/4". It isn't a 1:1 so with the 4-1/2" height of the ALLTREK you're going to gain about 3/8"-1/2" overall.
We have the Correct Track # RR55QX which extends your hangers and raises the trailer 1-1/4" or 2-1/4". However, this is not compatible with the CRE3000 you have now. Instead of trying to piece things together to get it to work, or replacing new equalizers since this is a 2026, I would consider cutting off the hangers and welding on longer ones to get the lift you need.
Product Page this Question was Asked From
MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: correct track
- Search Results: trailer brakes accessories and parts
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde x brace
- Shop: Correct Track Trailer Alignment and Lift Kit - Triple Axle
- Search Results: jack blocks
- Search Results: timbren vehicle suspension
- Search Results: ground control 30
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: 16" wheel
- Q&A: Lift Kit and Upgraded Equalizer for 2025 Forest River Impression 238RL
- Shop: Suspension Enhancement
- Shop: Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: MORryde Tandem Axle Trailers AllTrek 4000 Equalizers Review
- Q&A: How to Use Blu Technology Bleach Free RV Sanitizer Without Filter System or Solo Canister
- Q&A: Should Trailer Hub/Drum be Replaced if it Has 1/8" Groove
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Lippert Heavy-Duty Replacement Shock Feature Review
- Article: How to Raise Your Travel Trailer Height
- Video: Review of Lionshead Trailer Tires and Wheels - Aluminum Wheel Only - LH48VR
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Q&A: Will MORryde X-Factor Fit With Lippert Center Point Air Ride Equalizer?
- Q&A: Recommended X-Factor Crossmembers
- Q&A: Center Cap to Use with Aluminum Eagle Trailer Wheel # LH48VR



John
6/8/2026
I love my Alltrek 4000 but...I wouldn't use it to increase the height of the unit. It will probably make it more top heavy. I'd rather find a way to decrease the height at the pinbox to make the unit level. Being level as you ride is very important for road safety. Going higher will only cause more instability problems. I got the 4000 because it was the same dimensions as my original equalizer. And then I adjusted my tongue height to make sue it was level as I drive down the road.