How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS

Question

Question:

Jon, Here are some pictures and measurements. I want all 4 springs and 2 equalizers with wet bolt set. This trailer is only 1.5 years old. I am looking for a better spring set but cannot afford more lift so it will fit in Pole Barn. The gross weight for the trailer is 9000 lb. I want better springs but not too stiff where they may damage the welds or frame. -Equalizer is 14 1/2" from bolt center to bolt center laterally. 2" bolt center to top Bolt center vertically -Springs are 26" eye to eye. 4 springs on each. I am guessing they are rated for 2200 lb each since the axle is 4400 lb rated.

asked by: Dennis R

0

Expert Reply:

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure center-eye to center-eye for the horizontal bolts and then from the center of the top eye to the centerline of the horizontal eyes.

Be sure to also note your axle weight rating as well.

I'm attaching dimensional photos from the Leaf Spring #e22YR and Equalizer Kit # AP233 for you to check out. If you can let me know what these different dimensions are I'll be more than happy to help you choose some replacement parts from our linked selection.

expert reply by: Jon G

0

Dimensions for 5-3/4" Equalizer
(click to enlarge)

Dimensions for Universal 4-Leaf Double Eye Spring for 4K Trailer Axle
(click to enlarge)

Axle Tag on 2021 Coachmen 259FKDS
(click to enlarge)

Leaf Springs on 2021 Coachmen 259FKDS
(click to enlarge)

Equalizer on 2021 Coachmen 259FKDS
(click to enlarge)

Dennis H.

10/20/2022

Jon, Here are some pictures and measurements. I want all 4 springs and 2 equalizers with wet bolt set. This trailer is only 1.5 years old. I am looking for a better spring set but cannot afford more lift so it will fit in Pole Barn. The gross weight for the trailer is 9000 lb. I want better springs but not too stiff where they may damage the welds or frame. -Equalizer is 14 1/2" from bolt center to bolt center laterally. 2" bolt center to top Bolt center vertically -Springs are 26" eye to eye. 4 springs on each. I am guessing they are rated for 2200 lb each since the axle is 4400 lb rated.

Reply

Jon G.

10/20/2022

Thank you for all of the info and pictures! If looks like you have the Curved Equalizer # K13-142-02 installed which measures 14-3/4" center eye to center eye and then 2" for the height like you mentioned. Any upgrade to the equalizer will be taller so you'll have to determine if it's still able to fit in your pole barn with the upgrade or not. I really like the MORryde 14-3/4" Shock Absorbing Equalizers # MR34AR because it's a proven system with really great reviews. The rubber inserts do wonders for absorbing shocks and vibration from inconsistencies in the road. Then for a leaf spring I recommend the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e22YR which matches your specs perfectly. To round out your replacement parts you need either the MORryde Kit # MR46ZR if your shackle straps measure 2-1/4" (center eye to center eye) or the Kit # MR76ZR if your shackle straps measure 3-1/8" (center eye to center eye). Attached are some videos for you to check out.

Reply

Answer 1

Hey Todd, The 500lb increase in capacity to the 4-Leaf Double-Eye Spring #e22YR will definitely work and would probably give you a bit sturdier of a ride because the springs won't compress as easily. Going too stiff can cause problems though…

view full answer...

Answer 2

You can definitely use the MORryde suspension bolts if that's what you're wanting to use. The correct kit depends on what your trailer is currently equipped with and how long your shackle straps are (see attached photo of where to…

view full answer...

Answer 3

It looks like you've got a pretty good grasp on all of this and thank you for the detailed information; it looks like most of the parts you've mentioned will work for you. For the leaf springs, the 26" long #e27SR will be the…

view full answer...

Answer 4

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

view full answer...

Answer 5

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

view full answer...

Answer 6

Assuming you mean you have a 35" wheelbase when you say you have a 35" axle center then yes, the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailer - 35" Wheelbase - 5.2K to 7K #MR47ZR will be compatible with your 2018 Grand…

view full answer...

Answer 7

Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…

view full answer...

Answer 8

It's not uncommon for new trailer leaf springs to measure shorter than the old leaf springs they are replacing. The reason for this is that leaf springs stretch as they age. Therefore, I do think the 26" long leaf spring options we offer…

view full answer...

Answer 9

Since you have a 3,500 lbs axle, I recommend the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles item #e22YR. These are for 4,000 lbs axles which will still work great with your Gulf Stream trailer. As far as your 26" measurement goes. If…

view full answer...

Answer 10

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

I can certainly point you in the right direction. Unfortunately we do not have access to Dexter's serial number database, and I cannot recommend springs based off of axle specs. If only it were so easy right? The best way to go about replacing…

view full answer...

How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching