Search: al91rb   >  

The Single Axle Trailer Fender #HP56VR is made of 14 gauge steel and has one edge that is a 90 degree angle to weld it to your trailer and the other has a more rolled edge. The strength of the fender and ability to hold 200 lbs is based on your…

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular…

The base or bezel used by the Bargman #47-84-527 Double LED tailllight is constructed of hard plastic, like the other rectangular lamps of this type. If you click the provided links, you can see a product demonstration and an install video. For…

Yes, it is possible to convert your 7-way on your trailer to a 4-way. To replace the wiring on your Coleman 10 Foot pop up camper we offer wiring adapters that allow connection of different formats of trailer wiring. The best option to change the…

I made a video for you showing how Optronics trailer light bracket #BK5557GB works with a light. This bracket will accept the following lights: LED applications: MCL-55, MCL-56, MCL-57, MCL-527, MCL-51, MCL-58, MCL-59 Incandescent applications:…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to…

I can certainly point you in the right direction on a few of the parts you will need. Unfortunately we do not carry a 20-3/4" long equalizer, so we do not have any kits that would accommodate that hanger size and axle spacing. We do have a…

Although we do not carry leaf springs that will work with this kit, I can tall you that the slipper springs you need for the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 42-1/4" Axle Spacing #HAP-105-205-02 will…

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

We carry rims with a 4.75 pilot hole, like #LHHA420, and #AM20783, however they're both for dual wheel applications and have an offset. Using a wheel with a 4.75 or 4.77 pilot will be just fine since there's such a small difference.…