Replacement Tail and Marker Lights for 1996 Ranger Trail Boat Trailer

Updated 01/07/2021 | Published 01/05/2021

Products Featured in This Question

Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2

(467)

$39.25

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber

(2519)

$15.25

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red

(2519)

$8.34

Question:

Wanting to replace tail lights and sidelights in my 1996 ranger trail boat trailer. I just need the lamps on the side light that would fit into the self grounding brackets that are riveted to the trailer. I would prefer LED’s on tail and side lights if available. The tail light fits snugly in a rubber frame. Tail lights are turn, stop and running lights. I need 4 yellow side lights and 5 red side lights. I can send pics if necessary

asked by: Henry A

Expert Reply:

Excellent idea, switching to LED. They use less power, last much longer and are brighter than incandescent lamps of the same size. Win, win, win.

The grommet mount lamps you reference should fit in a 6-3/4 by 2-1/2 inch rough opening, which is the typical size. I'd recommend measuring the rough opening to confirm. If that dimension checks out, the # TLL12RK LED taillight kit would work well for you.

For the marker lights, if the interior of their mounting brackets measure 2-1/2 by 1-3/16 inches, you'd use # AL91AB for amber or # AL91RB for red. Once again, you'll want to measure to confirm.

expert reply by: Mike L