Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…
view full answer...The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…
view full answer...Hello Michael. In order to add a 7-way trailer connector to a 2022 Nissan Pathfinder you'll need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK58VR. Then from there you want to add the Universal Installation…
view full answer...There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…
view full answer...The 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L and the Universal Installation Kit for Trailer Brake Controller part #ETBC7 will both still charge your trailer's battery even when using the Curt Echo Mobile Trailer…
view full answer...Yes, you can use a 2-1/2" to 2" trailer hitch sleeve adapter with a weight distribution system. I recommend the Trailer Hitch Receiver Reducer Sleeve part #e33YR which has a 3" to 2-1/2" and a 2-1/2" to 2" for this. The…
view full answer...For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.
view full answer...I can indeed; the correct replacement for your 8-207 Dexter hub and drum is the following: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #84546UC3
view full answer...While we are able to ship you 3 of the Master lock #ML377KA that will use the same key, we are not able to guarantee any specific key code. So will you get 3 keyed alike locks? Yes. Will they have the 0370 Key? Probably not.
view full answer...I recommend using the Timbren jounce-style suspension enhancement for your 2020 Toyota 4Runner because it is a quick installation and once you're done there is absolutely no maintenance. Since no air has to be added these kits simply work when…
view full answer...For sway control on your 2017 T@B 320-S I recommend the Reese Friction Sway Control Kit #83660 because it will keep your T@B stable and allow you a more comfortable towing experience. Using the Reese kit gives you control over your trailer and…
view full answer...The reason you cannot back up with friction sway control like the Curt #17200 installed on your travel trailer with a single 3500lb axle is when turning sharply the bar will be extended or compressed to far which can cause the mounting bracket on the…
view full answer...